Yeacomm YF-S12P User manual

Yeacomm YF-S12P User Manual
Thanks for choosing Yeacomm YF-S12P 4G wireless router, please read
the user manual carefully so that it will be more convenient for you to use the
router.
1. Product Manual
1.1 Product diagram
1.2 Product interface
(1) WPS Button (2) WLAN ON/OFF Switch
(3) Phone Port (4) LAN Port
(5) USB port (6) DC Power
(7) Power Switch (8) Reset Button
(9) SIM Card (10) ExternalANT Interface
(11) Power LED (12) WIFI/WPS LED
(13) LTE LED (14) Signal Strength LED
1.3 Indicator
Type
Status
Description
Power
Blue On
Power normal, the router power on
Blue Off
Power abnormal, the router power off
WLAN
Blue On
WIFI is opened and has data transmission
Blue blink
WPS
Blue Off
WIFI closed
Internet
Blue
Connected the internet
Red
Not connected
Signal
One
The Signal is poor
Two
Signal is moderate
Three
Signal is good
Four
Signal is good
Five
Signal is very good
1.4 Picture and guide for installation of external antenna, LAN, adaptor
and PC.
Turn off the router and unplug the power adapter before installing any
external panel antenna.
Do not use external antenna during thunderstorms.
Only use external antennas provided by your carrier.
2. Quick Configuration Guide
The router supports standard RJ45 cable or WLAN wireless way to connect
computer, Supports Windows XP/Windows 7/Windows 8/Window 10/MAC
OS/Linux/Android, and so on.
（1）Insert the SIM Card according to the given instructions.
Connect the LAN cable to the LAN port and then check the power
adapter label and device sticker if matched, before plug it to the power
outlet.

（2）Set your computer network to obtain IP address automatically. Once the
computer get the 1P address, open your web browser and type the
default gateway IP address “192.168.0.1.
（3）Click the “Login” in the upper right corner to access the user page using
the username and password indicated at the device sticker at the bottom
of the S12P.
（4）Wi-Fi configuration
Wi-Fi is enabled by default, and the default Wi-Fi name and password are
provided on the device sticker label.
You are advised to keep the default Wi-Fi name and password unchanged.
If you need to modify them, login first to the device website, click Device
Settings > Wi-Fi-2.4GHz settings or Wi-Fi-5GHz setting and then follow the
instruction to set your own Wi-Fi password.
3. Package Contents
（1）1 x S12P Router （2）1 x Power Adaptor
（3）1 x LAN Port Cable (RJ45) （4）1 x S12P User Manual
（5）2 x ExternalAntennas
4. Precautions
（1）When you remove and insert the SIM card, please ensure the device is
powered off.
（2）Do not use the equipment in case of lightning and unplug the external
antenna and power adapter.
（3）If the device is working fine, do not change the parameter or other
functions, if changed and cannot access Internet, please try to reboot,
press and hold the reset button for more than 5 seconds to restore the
factory settings.
5. Common faults and treatment methods
Common faults
Treatment methods
The device is powered on but the front
panel power light is off.
Check the power adapter if properly
plug in the power outlet and the device
power port. Check the cable for any
damaged
Computer local connection is not
displayed, cannot successfully PING
IP address of the device, cannot open
the WEB page.
Check if the computer’s LAN network
status obtained automatically IP
address from the device DHCP pool,
reboot your computer and your
modem. Clear your browsing history /
CACHE. Check your LAN cable if
properly plug in the LAN port.
The device is working but cannot
access the internet through the web
Set the computer to automatically
obtain the IP address and DNS server
address.
Change user page login password or
SSID password, but forget the
password
Long press the reset button for more
than 5 seconds to restore the factory
settings, and then check the
username and password in the back
label information.