Yescom YSCM2006 User manual

Tent with Nets
User Manual
Page 1
Safety Instructions
1. Use the product in a wide-open area.
2. Never leave your tent unattended.
3.
When assembling the tent cover, make sure that no person
stands around for safety concerns.
4.
Keep small parts away from children in case of accidental
choking caused by swallowing.
5. Children are not supposed to operate the product.
6.
We highly recommend that the setup of this product should be
carried out by at least 2 people.
7. Always close and put away the product on windy days.
8. Keep the product away from fire or heating sources.
Specifications
Overall Dimensions
(LxWxH)
116 9/16'' x 116 3/4'' x 109 7/16''
(296 x 296.5 x 278 cm)
Net Weight
34.8 Lbs(15.8 kg)
Package Contents
Frame x 1
Upper Cover x 1

Assembly Instructions
1
Half-Fold Frame
Bottom Cover x 1
Portable Bag x 1
Coarse Rope (3 m) x 4
Plastic Hook x 32
Soft Rope (2 m) x 4
Round Stake x 4
L Shape Stake x 8
Net x 4
2
Place Upper Cover
Page 2
Upper Cover
Place upper cover on the top of frame center.

3
Extend the bottom cover. Adjust the cover to match it with all the
feet top of the frame and then put the cover onto your frame.
Secure upper cover to bottom cover with the fasteners around the
margin of these 2 covers.
Page 3
Place Bottom Cover
Wrap fasteners underneath
the cover on 4 hypotenuses
around the poles.
4
Secure Upper Cover to Bottom Cover

Page 4
5
Pull up 4 Poles & Insert into Cover Corners
Pull 4 extending poles out from the frame corners to lock them up till
you hear the "click" sound and insert them into pouches of 4 cover
corners.
6
Extend Frame & Lock Frame Top
Leg Joint
Pull up 4 leg joints.
Pouch
Pull up leg joints on 4 corners till you hear the "click" sound to secure.
Then extend the tent to the fullest with at least 2 people standing
diagonally.
Extending Pole
Note: Do not unfold the frame fully when carrying out this step or poles
will be too hard to put on cover.
the canopy.)

Page 5
Press the node to stretch 4 legs to your desired height till you hear
the "click" sound to lock.
7
Adjust Height of Legs
Node
8
Bind Coarse Ropes to Cover Top from Inside
1. Bind one end of coarse rope around frame corner and tie a knot.
3. Repeat to bind the other end of coarse rope to the other side of
frame corner and tie a knot. And connect other 3 coarse ropes to the
other 3 sides of cover top.
2. Insert coarse rope through the loops inside the cover top.
Coarse Rope
Coarse Rope
Loop

Page 6
Hook
10
Secure Frame to Ground
(Fig. 1)
(Fig. 2)
L Shape Stake
1. According to the length of corner ribbons, secure 4 hooks to the
appropriate leg holes (Fig.1).
2. Install L shape stakes to the 4 leg feet to secure frame to ground as
shown (Fig.2).
9
Hang Nets onto Cover Top with Plastic Hooks
Plastic Hook
The net zippers are at 2 sides of net. To ensure the zipper on each net
is positioned at the center of tent, hang the net on the corner side of
tent as shown. Then continue to connect other 3 nets to cover top.
Zipper
Connect 6 plastic hooks to the coarse
rope on each side of cover top. Then
hang net to the cover top through
those hooks.

Page 7
11
Bind Drawstrings to Frame Leg & Nets
3. Connect soft ropes to round stakes and ring pulls to secure the
tent on the ground.
Ring Pull
Round Stake
There are 2 drawstrings on the nets. Bind the drawstring at the back of
net to the corresponding feet. Bind the drawstring in the front of net to
collect net when needed.
Front
Back

Page 8
1. Press the node to retract the
extending poles on frame corners.
Node
Button
2. Press the buttons on 4 feet joints
to unlock 4 legs.
⚫Fold up Tent
3. Take off the cover and further
fold the frame.