YITAMOTOR YA-004 User manual

- 1 -
BULL BAR FOR
TACOMA 05-15
BULL BAR FOR
TACOMA 05-15
- Please read this installation manual before installing this part. Protect your car properly in the
event of any scratches.
- After installation, you may need to re-tighten all hardware periodically to ensure safety.
- The installation pictures are only for your reference. There may be some differences between
the image and the actual part, but it does not affect the installation.
$77(17,21
: [email protected]
Contact us: ITEM NO.:YA-004

- 2 -
3$576/,67

- 3 -
STEP 1
STEP 1
STEP 2
STEP 2
Remove the 2 X M14 nuts of the original car with a wrench. (As shown in Figure 1)
Install bracket 1 with the original car bolts and nuts. Do not tighten at this time.
(As shown in Figure 2)
PIC 1
PIC 2

- 4 -
STEP 3
STEP 3
STEP 4
STEP 4
Mounting the bracket 1 to the car frame.
There is no difference for mounting left and right bracket.
1) Insert the M10 large washer (No. 7) into the M10 bolt (No. 5), and put the
thicken washer (No. 4) between the body beam and the bracket 1.
2) Insert the bolt into the bracket 1 and the car girders, use the thicken washer
(No. 4), M10 large washer (No. 7), M10 spring washer (No. 8) and M10 nut
(No. 9) in turn. (as shown in Figure 3, Figure 4, Figure 5, Figure 6)
3) Tighten the nut when lining up well.
PIC 3 PIC 4
PIC 5 PIC 6
Connect the bracket 2 to the bull bar via M12 bolt(No. 10),M12 spring washer
(No. 11),M12 large washer(No. 12) in turn.
Front of the frame Back of the frame

- 5 -
STEP 5
STEP 5
STEP 6
STEP 6
Connect the two kinds of brackets. There are four groups of mounting hardware
for connecting the Bracket 1 and Bracket 2 as shown. Use the M10 bolts (No. 6),
2 x M10 large washer (No. 7), M10 spring washer (No. 8) and M10 nut (No. 9) in
turn for each mounting hole.
Tighten all the bolts, the installation is complete. If you have any problems on
installation, Please go back to our product link, there is a step by step installation
video to help you out.
One side The other side

- 6 -
1.Product and hardware didn't fit your car
2.Missed required mounting hardware
3.Received a damaged product
4.Received a wrong product
If you get in trouble regarding:
Contact us : [email protected]