
T7 cannot be found, please confirm whether the headset is
turned on or you can turn off the Bluetooth of the mobile phone
and then turn it on again)
IV. Function Introduction
Pick up/hang up the
phone
Press the multifunction button
Decline a call Long press the multifunction
button for 2 seconds
Music play / pause Press the multifunction button
Last song Double click the left headset
multifunction button
Next song Double click the right headset
multifunction button
Lower the volume Long press the left headset
multifunction button
Increase the volume Long press the right headset
multifunction button
Siri or voice assistant Three click the multifunction
button
3
III. Headset Pairing
1. After the two headsets are taken out of the chargin
nd
g box or
turned on, the left and right headset will pair automatically a
enter the connection mode with the device.
2. Turn on Bluetooth of the phone and search for Bluetooth
devices.
3. Find the Bluetooth device: T7 and connect it, and there will be
a prompt tone after the successful connection. (Note: if