Yoda Bactiscan User manual

BactiscanTM
USER MANUAL
INTRODUCTION
Thank you for purchasing the EIT Bactiscan™
rechargeable bacteria and biofilm detection lamp,
our latest innovation offering an all-in-one solution
that combining a high performance lamp in a single
lightweight, IP67 rated compact unit.
Rechargeable Bacteria and Biofilm Detection Lamp
Important Warnings
Please read these instructions carefully to ensure the safe and effective use of this
product.
1. Read manual before use•
2. Always use the charger supplied, never
use a damaged charger or alternative
charger•
3. Disconnect from any power sources and
switch o, before performing any routine
cleaning or maintenance•
4. Leave servicing to a qualified person. In
case of any problems or questions please
contact your local Authorised Bactiscan™
Reseller or contact EIT direct at support@
eit-international.com•
5. Do not shine the light directly into
people’s eyes, as it may damage their
eyesight•
6. Keep out of reach of children
PARTS:
1. Lens
2. On/Off Button
3. Adjustable stand
4. Charging base
5. DC charger

RECHARGEABLE BACTERIA AND
BIOFILM DETECTION LAMP
With Bactiscan’s™ unique wave alternating UV
system, Bactiscan™ enables food processors
to immediately isolate Biofilms, mould and
bacteria such as salmonella and E.coli and
many other contaminants are easily located
and identified with Bactiscan™ which makes
the remediation job much faster and therefore
more cost eective.
These contaminants are often undetectable
using other methods such as white light and
UV lamps. With Bactiscan™ you can light up
the entire surface and get an immediate result,
so within seconds you can pick things up that
would take hours with any other method.
Runtime
Product BactiscanTM
Power On 1h 30mins
Charge Time 6hrs 30mins
IP Rating IP67
Battery 7.4V 6.6Ah Li-ion
Impact Resistance 1.5 Metres
Charge Base Ye s
Vehicle Charger Ye s
Dimensions 250 x 125 x 120 (mm)
Weight 1.0KG
CHARGING
1. Slide the Bactiscan™ inside
the charging base, push
until it slots in the back
and connects with the
charging ports.
2. Connect the charger lead
into the input socket at the
back of the charging base.
3. Plug the charger into a
suitable socket outlet. Turn
switch on. The indicator on
the charger will illuminate
red when charging and
green when fully charged.
4. To release the Bactiscan™
from the charging base,
hold and pull the release
levers towards you, use
your thumb to push the
Bactiscan away from the
charging slot as shown in
picture.
5. Once the Bactiscan™ is
released slide the lamp
out of the charging base.
The Bactiscan™ unit is
ready to be used.
Normal View
Item looks clean and
normal under white
light or standard UV
HANDHELD BACTERIA
AND BIOFILM
DETECTION SYSTEM
Environmentally friendly wave altering UV to quickly
identify areas harbouring bacterial contaminants
such as E.coli, listeria and salmonella which are
often missed under standard white light or UV lamp.
Bactiscan™ View
Clearly reveals
contamination
Specification
OPERATING THE
BACTISCANTM
Bactiscan™ illuminates a surface via 4 separate
UV lights. These lights are UV-A type and are
safe for short use. It is always recommended
that the user wear eye protection (not
supplied) when operating Bactiscan™. To
switch ON, simply hold the grey button and
the Bactiscan™ will turn on. To turn the lamp
OFF, release the grey button.
Bactiscan™uses smart battery technology.
When the battery is fully charged the battery
will fall into sleep mode and will maintain a
full charge via trickle charge. It is safe to leave
Bactiscan™ plugged in whilst in its cradle.
Please note: The battery will reach optimum
performance after 5 complete discharge/
charge cycles.

WARRANTY
The BactiscanTM products have a 1-year standard warranty
on all manufacturing defects and 1-year warranty on all
rechargeable batteries from the date of purchase.
Yoda Health & Environmental Solutions warrants this
product free from defects in material and workmanship
for a period of 1 year from the date of purchase. This
warranty does not cover damage caused by misuse or
abuse, accident, the attachment of any unauthorised
accessory, alteration to the product, or any other
conditions whatsoever that are beyond the control of
Yoda Health & Environmental Solutions.
SAFE DISPOSAL OF
WASTE ELECTRICAL
PRODUCTS AND
BATTERIES
If at any time, you need to dispose of this
product or parts of this product: please note that
waste electrical products and batteries should
not be disposed of with ordinary household
waste. Recycle where facilities exist. Check
with your local authority for recycling advice.
Alternatively, Yoda Health & Environmental
Solutions is happy to take receipt of this product
at end-of-life and will recycle it on your behalf.
MOUNTING THE
CHARGING BASE
Mounting the charging base The Bactiscan™
lamp is supplied with a charging base, providing
a convenient way to charge it. The base can be
used flat on a desk, or fixed on a wall or a vehicle.
The charging base has four mounting holes,
measurements are shown in Figure 1. Make sure the
M5 fixings screws used to mount the charging base,
are strong enough to support the weight of the
Bactiscan™. Take care not to over tighten the fixings
and mount on a flat/level surface, so the charge
base isn’t distorted or damaged.
Figure 1
Holder may be mounted on either a horizontal or
vertical panels. Mount using four M5 fixing screws.
CAUTION!
Modifications not expressly approved by EIT
International may void theusers authority to operate the
equipment. The removal of any panelsor components,
or to open the sealed BactiscanTM casing will render
theequipment damaged and will void any Warranty in
place (see Page 7– Warranty) . Damaged BactiscanTM
unit through the malice of any thirdparty will render the
equipment written-o and the user will be liable forall
costs associated for repair or replacement of the unit.
YODAHES.COM
[e-mail]
BEAVER HOUSE - HEAD OFFICE
AGOSTINHO NETO RD
AIRPORT RESIDENTIAL AREA
PO BOX OS 2778
ACCRA GHANA
General/Sales:
Yoda Health & Environmental Solutions LTD. is registered in the Republic of Ghana under number C0060905654 and the Federal Republic of Nigeria under number 1801857.
@yodahes FOR FURTHER INFORMATION, VISIT
GH: [phone]
NG: [phone]
Support: GH: [phone]
NG: [phone]