Yolink YS4102-UC User manual

Smart Sprinkler Controller
User Guide
YS4102-UC
AUTO 00Hrs
MODE DALAY
MENU ZONE
1
09:35 AM
Wed nesda y
11-0 1-201 9
ZONE 123456
08: 00 A
05: 00 P
Mon SunSatFri ThuWedTue

Contents
Product Required····························· ··· · · ·· ················· ···· ·· ···· ··· ·2
Features······························································· ···· ··· ·· ·4· ·· · ·
Set Up mart Sprinkler Controller····················· ··· · S ················· ···· ·5
What’s In The Box······· ····· · ·· · · ··· ··1······················ ····· ·········· · ··· ···· ·
Using YoLink A with mart Sprinkler Controllerpp S ···························15
Set the Smart Sprinkler Controller··············································22
Specifications····································· ·········· ·······················37
Maintaining the ·········· · ·· Smart Sprinkler Controller ···· ········· ········36
Troubleshooting ·················· ····· ······················ 38··········· ····· ······ ·
WARNING··········· ····· ······ ·· ·· ··················· ····· ·· ·· ····················· 39
Customer Service & Warranty ····· ·· ······················ 40················ ·· ··· ·
Introduction··········································· · ·· · ·· 3············ ···· ··· ···· ···
Install the S ·············································9mart Sprinkler Controller

What’s In The Box
1
Smart Sprinkler Controller * 1
Drywall Anchor * 4
Quick Start Guide * 1
Wall Screw * 4
1 2 3 4 5 6 M C CR
Backplate * 1

Product Required (not included)
2
A smartphone or tablet
running iOS 9.0 or higher; (
Android 4.4 or higher)
YoLink Hub
(Connecting to internet)
Electric Screwdriver
OR
Screwdriver

Introduction
YoLink Smart Sprinkler Controller replaces old controller, just a tap of the button on the device
or YoLink App lets you remotely access, change or set your watering schedules at anytime
anywhere. Only 2 schedules per day in weekly for 4 seasons are allowed. Maximum 6 zones
and 1 master valve (not all systems have a master valve) can be connected to Smart Sprinkler
Controller. The sprinkler controller will run watering zone by zone from 1 to 6.
R: Live wire; C: Common wire
M: Master valve; 1-6: Zone wires
12
3
4
5
6
MC
C
R
SWITCH BUTTON
ZONE
Switch zones' watering progress
MODE
Switch different mode: Auto, Manual, Off
DELAY
Delay watering
AUTO 00Hrs
MODE DALAY
MENU ZONE
1
09:35 AM
Wed nesda y
11-0 1-201 9
ZONE 123456
08: 00 A
05: 00 P
Mon SunSatFri ThuWedTue
MENU
All settings 3

Features
Control from anywhere - Control your Smart Sprinkler Controller remotely via YoLink App
on your iOS or Android device.
Schedule - Automatic watering at a certain time.
Delay - Will not run watering during delay time.
Automation - Set up rules for “If this then do that” function via YoLink App. If the triggered
condition is met, then action device will run automatically according to the setting.
Voice Control - Use Alexa or Google Assistant to control your devices with voice commands.
Manual - Manual watering at one time.
ECO - Automatically delay watering in rainy days according to the ECO setting.
4

Set Up Smart Sprinkler Controller
Follow the steps below to set up your Smart Sprinkler Controller via YoLink App.
Step 1: Set up YoLink App
Download the YoLink App from the Apple App Store or Google Play.
5

If you don’t have a YoLink account, tap Sign up for an account and follow the steps
to sign up an account.
Open the App. Log in your YoLink account.
Step 2: Log in or sign up with YoLink account
6

Step 3: Add device to YoLink App
Tap the “ ” in YoLink App. Scan the QR Code on the controller.
Tap the “Bind Device” to add the device to your YoLink account.
b. Room - Choose a room for Smart Sprinkler Controller.
a. Name - Name Smart Sprinkler Controller.
You can customize the name, set the room, add to/remove from favourite.
c. Favourite - Click “ ” icon to add/remove from Favourite.
Please add your Smart
Sprinkler Controller to
YoLink App first before
you install it.
Note
7
12
3
4
5
6
MCCR
a
b
c

Step 4: Connect to the cloud
Power on th e S mart Sprinkler Con troller and yo ur device wil l conn ect to th e clou d
auto matically.
Note
Make sure your hub is connected to internet either wired or wireless.
Cloud
Internet
AUTO 0 0Hrs
MOD E DALAY
MEN U ZONE
1
09:3 5 AM
Wedn esday
11-01 -2019
ZON E 123456
08:00 A
05:00 P
Mon Su nSatFri ThuWedTue
8

Step 1: Turn off power
Install the Smart Sprinkler Controller
This protects you and avoids blowing a fuse in your equipment. Press any button on your
old sprinkler controller to make sure your system is off.
9
Turn off the power

Photograph the wiring inside your existing controller to reference during installation.
Remove your old controller from the wall.
Step 2: Remove the old
Photograph wiring Remove the old
10

Step 3: Mount the backplate
Moun t t he back p l a te by s c r ewing i t o nto the w a l l using t h e provi d e d screws . Wall
anch o r s are incl u d ed for dry w a ll.
11
1 2 3 4 5 6 M C CR
Mount the backplate Wall Anchors
(Drywall installs)

Step 4: Connect your wires
While referencing the photo of your previous wiring, insert the wires into the appropriate
terminals.
Connect the wires in ordered to make sure your controller works well.
C - Common Wires. Common wires are often labeled “C” or “Com”. You can insert them
into any of the “C” terminals.
R - Live Wires. Live Wires are often labeled “R” or “Live”. You can insert them into any of
the “R” terminals.
1-6 - Zone Wires. Zone wires correspond to your landscape's zones. Insert them into the
numbered terminals.
M - Master Valve. Not all systems have a master valve. Master valve wires are often
labeled “M,” “MV,” or “Pump.” If you have a master valve, wire it into the “M” terminal.
12

Wiring diagram
13
24V AC Live Wire (R)
1 2 3 4 5 6 M C CR
24V AC Common Wire (C)
Master Valve (M)
Zone 6 (6)
Zone 5 (5)
Zone 2 (2)
Zone 3 (3)
Zone 4 (4)
Zone 1 (1)
Common Wire (C)
Common Wire (C)
24V AC
Adapter
24V AC
Output

Step 5: Install the new and turn on power
Gently push the new, wired sprinkler controller back onto the backplate and turn power
on.
14
Turn on the powerInstall the new
Note
Only 24V AC power access is supported.

Using YoLink App with Smart Sprinkler Controller
Controls
Show you the current watering mode and progress of watering for each zone.
There will be a green leaf on the screen when ECO mode is on.
15

Details
You can customize the name, set the room, watering time max or manual watering time, add to/
remove from favourite, check device history.
b. Room - Choose a room for Smart Sprinkler Controller.
a. Nam e - Nam e Sm art Sprinkler Co ntr oller.
Tap the icon for each of the settings you want to
personalize.
Tap the “ ” icon at the top-right corner to go to
details.
Tap the “Smart Sprinkler Controller” in App to go
to its controls.
e. History - Check the history log for the Smart
Sprinkler Controller.
f. Delete - Current device will be remove from your
YoLink account.
d. Favourite - Click “ ” icon to add/remove from
Favourite.
c. Manual Watering Time - Set manual watering time
for each zone.
16
a
b
f
c
d
e

Mode
You can set watering mode according to your need.
Tap “Mode” to switch mode: Auto, Manual, Off.
Tap the “Smart Sprinkler Controller” in App to go to its controls.
b. Manual - Display the manual watering schedule.
a. Aut o - Displa y th e la tes t w ate rin g a nd next water ing sch edule.
c. Off - Display no watering schedules.
17

Schedule
18
You can set 2 schedules per day in weekly for each season.
Within the schedule screen, set start date and
two watering time a day for the season, duration
of watering, and repeating frequency.
Tap “Schedule” and select “Edit Schedule” to open
the Edit Schedule screen.
Swipe left each schedule to edit it.
Tap the “Smart Sprinkler Controller” in App to go
to its controls.
Note
All the schedules will be able to work without
internet.
Tap “ ” icon to save settings.