Yoosol Electronics PRIMO-P1 User manual

PRIMO- P1/p1u
USER MANUAL
Rev 1.2

- 2 -
CONTENTS
1. Specifications
2. Appearance
3. Display / Operation
3-1. Operation/ Preset (Batch) mode
3-2. Operation/ Adjust LEVEL value
3-3. Operation/ Change Speed
3-4. Operation/ Add mode
3-5. Operation/ UV Setting
3-6. Operation/ Alarm
4. Error code / Trouble shooting
5. Accessories / Safety

- 3 -
1. Specifications
P1/ P1U (Common)
Speed
(4 Selectable speeds)
1,000 notes/min (Standard)
(800 / 1000 / 1250 / 1500 notes/min)
Display
2. 8 inch Color LCD (320 x 240 Pixels)
Dimension(mm)
292(W) x 251(D) x 244(H)
Weight
Approx. 5.5Kg
Hopper capacity
Max. 300 notes
Stacker capacity
Max. 300 notes
Feed system
Roller friction system
Sensor
IR count sensor for detecting double/chain/half notes
Interface
Serial Port
Power supply
90~240V 50/60Hz Free voltage
Power consumption
41 Watts
P1U (With UV detection)
Sensor
IR count sensor + UV(ultraviolet) detection (On/Off)

- 4 -
2. Appearance
No
Name
No
Name
1
Hopper Guide
6
Kicker roller
2
Side Cover
7
Gate adjustment screw
3
Display
8
Power connector
4
Hopper
9
Power Switch
5
Stacker
10
RS232 – Connect External Display(Option)

- 5 -
3. Display
Key Function Key Function
Enter PRESET Preset count
0~9 LEVEL Set notes density
Up/Down SPEED Set count speed
Mode ADD Add total count
Clear(Reset ) Restart / Back
3-1. Operation/ Preset (Batch) mode

- 6 -
Press “PRESET” Key
Select Batch number 10, 50, 100, 150, 200, 250 ~ unlimited) By PRISET Key.
Also select certain count number by Up/Down key.
Default set: 200/notes
3-2. Operation/ Adjust LEVEL value
Press LEVEL Key
Default set: AUTO
- If machine count notes & show “Double error” many time, you can adjust
notes density manually by Level Key.
AUTO Base on first notes, automatically set density Level
OFF OFF the function - won't be able to detect "double"
When count thin & bright notes
When count middle density value notes(Level 1~2)
It's for high density level(dark) & thick notes

- 7 -
3-3. Operation/ Change Speed
Adjust Speed
- Default speed : 1,000 / min
- Change speed 800/1000/1250/1500 notes / min
3-4. Operation/ Add mode
Add mode: Accumulative total of all counted bills

- 8 -
3-5. Operation/ UV mode
Set UV – [Option]
- Press “M” key to turn on the UV detection (On/ Off)
3-6. Operation/ Alarm
Alarm
- When sound Alarm, there is Error message show up in red,
then machine stop the counting until clear Alarm.

- 9 -
Please press “C” key to clear and counting again.
* If machine in add mode, added count value also will be clear when you press “C”
key.
4. Error code / Trouble shooting
Error code
Symptoms
Trouble shooting
Over count
Over counting
Remove notes from Stacker and count again
Double
Double
Remove notes from Stacker and count again
Chain
Chain notes
Make it sure counting 2 notes at the same time or not.
Adjust gate adjustment screw to adjust thickness
Skew
Skew notes
Remove notes from Hopper and count again
Hopper
machine
Check the hopper sensor
Check external light interference near the machine
JAM(L/R)
Note is jammed
Open the roller cover, remove the notes and count again
Half
half note
Make it sure note is half and adjust feeding angle into machine
UV
Detect CF by
UV
Check the notes is fake note or not

- 10 -
5. Accessories / Safety
NO
NAME
1
Power code
2
External Customer Display
3
User Manual
Safety
Do not touch the machine & power cable with wet hands
Do not operate the machine, if smoke or strange smell is detected
from the machine. In this case, please contact your local distributor
Never disassemble the machine except the trained person.
Be careful not to pinch your finger when closing the Upper & Rear Cover
Turn off the machine during cleaning, and do NOT use flammable
gas spray for cleaning.

- 11 -
- Memo -

- 12 -
Yoosol Electronics Co., Ltd.
#1004, ACE High End Tower 6,
Gasan-dong 234, Beotkkot-ro, Geumcheon-gu, Seoul Korea
Tel: [phone] Fax: [phone]
Website: http://www.i-primo.co.kr/
E-mail: [e-mail]