York Fitness York 2100 User manual

1
OO
2
ELLIPTICAL TRAINER
EXERCISES
&
INSTRUCTION
MANUAL
05 / 2000 TWN Product may vary slightly from pictured.

SAFETY GUIDELINES:
Please read and follow the following safety guidelines:
Before beginning any exercise program, you should consult with your doctor.
It is recommended that you undergo a complete physical examination.
,
Read this owner s manual and follow the instructions.
Assemble and operate the YORK 2100 ELLIPTICAL TRAINER on a solid, level surface.
Keep the area behind the YORK 2100 ELLIPTICAL TRAINER clear.
Always use your YORK 2100 ELLIPTICAL TRAINER in adequate space e.g., at least 2 ft.
(60cm) clearance on each side.
Never allow children on or near the YORK 2100 ELLIPTICAL TRAINER.
Always check the YORK 2100 ELLIPTICAL TRAINER before using it, in particular make sure
all parts are assembled, and nuts and bolts are tightened.
Do not use the YORK 2100 ELLIPTICAL TRAINER if the unit is disassembled in any way.
Keep hands away from moving parts.
The weight limit for this product is 225 lbs (100 kgs).
Wear proper workout clothing: Do not wear loose clothing.
Do not wear shoes with leather soles or high heels. Tie all long hair back.
Remove jewellery, rings, chains and pins before exercising.
Do not rock the unit from side to side.
Care should be taken when mounting and dismounting the unit.
Do not place any liquids on any part of the Elliptical Trainer 2100.
,
Do not use any accessories that aren t specifically recommended by the manufacturer,
these might cause injuries or cause the unit to fail.
Always consult your doctor before undertaking any exercise programme.
Work within your recommended exercise level, do NOT work to exhaustion.
If you feel any pain or abnormal symptoms, STOP YOUR WORKOUT IMMEDIATELY.
Consult your physician immediately.
YORK 2100 ELLIPTICAL TRAINER
The YORK 2100 ELLIPTICAL TRAINER is designed for the use and enjoyment of the serious
trainer as well as the dedicated user. By following the above precautions and using good
judgement and common sense, you will have safe and pleasurable exercise regimen with the
YORK 2100 ELLIPTICAL TRAINER.
CARE AND MAINTENANCE
Use a warm damp cloth with mild detergent
to keep your YORK 2100 ELLIPTICAL TRAINER
clean.
TOOLS REQUIRED
The tools enclosed in the carton are two
multi-purpose spanners (which one has a
screwdriver function) and one allen key.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
YORK BARBELL (U.K.) LTD.
CHURCHILLWAY,
DAVENTRY,
NORTHANTS, NN114YB
ENGLAND
TEL: [phone]
FAX: [phone]
E-MAIL: [email protected]
HELP LINE
(8:30am- 5:00pm)
YORK BARBELL (S.A.) (PTY) LTD.
P.O. BOX 14012,
WADEVILLE 1422
SOUTHAFRICA
TEL: [phone]
FAX: [phone]
E-MAIL: [email protected]
HELP LINE
(8:30am- 5:00pm)
YORK BARBELL (AUST.) LTD.
UNIT 1, LOT 2,
SWAFFHAM ROAD,
MINTO, N.S.W. 2566
AUSTRALIA
TEL: [phone]
FAX: [phone]
E-MAIL: [email protected]
HELP LINE
(8:30am- 5:00pm)

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
1.
GENERAL
REMOVE ALL THE PARTS OF YOUR ELLIPTICAL TRAINER 2100 FROM
THE CARTON AND PLACE THEM ON THE FLOOR CAREFULLY.
ASSEMBLING YOUR ELLIPTICAL TRAINER 2100 IS SIMPLE.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT SHOULD TAKE
YOU AROUND 15~20 MINUTES.
ASSEMBLY INSTRUCTION
ATTACH THE STABILIZERS
Fix the front stabilizer with moving wheels
to the main frame and secure, using two
carriage bolts, washers and locknuts.
Fix the rear stabilizer to the main frame
and secure,using two carriage bolts,
washers and locknuts.
X2
X2
X2
X2
X2
FRONT
STABILIZER
MOVING WHEEL
REAR
STABILIZER
END CAP
B
A
X2
NOTE: Make sure you fasten the nuts &
bolts securely for your safety and
comfort when exercising.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
2.
ATTACH THE FRONT POST
Rest the front post on the main frame carefully as
shown.
Connect the sensor wire plug to the middle wire socket.
Check middle wire runs up the front post and out
the top - later this will connect to the computer.
Insert the front post to the main frame in position and
secure, using four hex head bolts, spring washers and
washers as shown.
NOTE: TAKE CARE to ensure the middle wire does not
get trapped when you attach the front post to
the main frame.
Fix the plastic cap onto the bolts head.
X4
Attach the tension control to the front post and secure,
using two self tapping screws.
A
FRONT
POST
MAIN
FRAME
B
FRONT
POST
MAIN FRAME
BRACKET
C
D
X4
PLASTIC
CAP
X2

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
3.
A
PEDAL
RIGHT
PEDAL POST
FRONT HOLE
B
RIGHT
PEDAL
POST
C
ATTACH THE PEDAL POSTS
Attach the pedal to the right pedal post and
secure, using two machine screws and three
thick washers as shown.
NOTE: Make sure you add two thick washers
with the screw for front hole when
assembling.
X2
X3
X1
X1
Fix the right pedal post to the right side
crank arm and secure, using one allen
head bolt as shown.
,, ,,
NOTE: The pedal posts are marked R
,, ,,
and L (Right & Left).
Tighten the allen head bolt to the crank
then fasten the nut to the allen head bolt
protruding through the crank arm.
This will secure it in place.
Repeat the same process for the left pedal
post assembly.
,, ,,
NOTE: The right pedal post R should be
threaded on clockwise.
,, ,,
The left pedal post L should be
threaded on clockwise.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
4.
A
RIGHT
PEDAL
POST
B
RIGHT
HANDLE
BAR
POST
C
RIGHT
HANDLE
BAR
ATTACH THE HANDLE BARS
Fix the right pedal post to the right handle bar
post and secure, using hex head bolt and
locknut as shown.
Attach the right handle bar to the right
handle bar post and secure, using two
machine screws, washers and locknuts.
Repeat the same process for the left handle
bar assembly.
NOTE: The handle bar end caps are marked
,, ,, ,,
,,
R and L (Right & Left).
Fix each handle bar to the matching
handle bar post.
X1
RIGHT
HANDLE
BAR
POST
RIGHT
HANDLE
BAR X2
X2
X2

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
5.
A
COMPUTER
FRONT
POST
BRACKET
B
MIDDLE
WIRE
C
COMPUTER
EAR
LOBE
PULSE
SENSOR
ATTACH THE COMPUTER
Attach the computer to the bracket on the
front post as shown.
Connect the middle wire plug into the rear
socket of the computer as shown.
Connect the ear lobe pulse sensor plug to
socket on the side of computer.
RECHECK THAT ALL THE BOLTS AND NUTS ARE TIGHTENED
SECURELY FOR YOUR SAFETY & COMFORT.

DESCRIPTION

PARTS LIST
KEY NO. PART NO. Q'TY(PCS) DESCRIPTION
18501-1 1MAIN FRAME
28501-2 2CRANK
38501-3 2COTTER PIN
48501-4 8THICK WASHER (6mm / t = 2mm)
58501-5 8NYLOCK NUT (M6 X 1)
68501-6 1SPROCKET / SHAFT
78501-7 2BEARING (20mm)
88501-8 2WASHER (20mm)
98501-9 1C RING (20mm)
10 8501-10 1DRIVE BELT
11 8501-11 1FLYWHEEL
12 8501-12 1NUT (M10 / t = 8mm)
13 8501-13 4SPRING WASHER (8mm)
14 8501-14 10 NYLOCK NUT (M8X1.25)
15 8501-15 1NUT (M10 / t = 5mm)
16 8501-16 1SPROCKET SHAFT
17 8501-17 2EYE BOLT (M6 X 1 X 35mm)
18 8501-18 2TENSION BRACKET
19 8501-19 2FLANGE NUT (M10 X 1.25)
20 8501-20 1BUCKLE
21 8501-21 1TENSION STRAP
22 8501-22 1TENSION CONTROL
23 8501-23 1CABLE STOP BOLT (M5 X 0.8 X 14mm)
24 8501-24 3NUT (M5 X 0.8)
25 8501-25 1CABLE CLIP BOLT (M5 X
0.8 X 12mm)
26 8501-26 4WASHER (5mm)
27 8501-27 1TENSION SPRING
28 8501-28 1MAGN
ET
29 8501-29 1SENSOR WIRE
30 8501-30 1MIDDLE WIRE
31 8501-31 1RIGHT SHROUD
32 8501-32 1LEFT SHROUD
33 8501-33 1FRONT STAB
ILIZER
34 8501-34 2PEDAL (R&L)
35 8501-35 2REAR STABILIZER
36 8501-36 1PEDAL POST (R)
37 8501-37 1PEDAL POST (L)
38 8501-38 1RIGHT PEDAL POST CONNECTO
R
39 8501-39 1LEFT PEDAL POST CONNECTOR
40 8501-40 8WASHER (8mm / t = 2mm)
41 8501-41 2SHAFT BOLT (9/16" - 20 X 3 9/16")
42 8501-42 2NUT (9/16" -20)

KEY NO. PART NO. Q'TY (PCS) DESCRIPTION
43 8501-43 2HANDLE BAR POST
44 8501-44 2PLASTIC BUSHING
45 8501-45 2PLASTIC BUSHING
46 8501-46 2BUSHING COVER
47 8501-47 2MACHINE SCREW (M6 X 25mm)
48 8501-48 1RIGHT HANDLE BAR
49 8501-49 1LEFT HAND
LE BAR
50 8501-50 2FOAM GRIP
51 8501-51 2END CAP
52 8501-52 1FRONT POST
53 8501-53 1COMPUTER
54 8501-54 4HEX HEAD BOLT END CAP
55 8501-55 2MOVING WHEEL
56 8501-56 2STABILIZER END CAP
57 8501-57 4PEDAL POST END CAP
58 8501-58 4CARRIAGE BOLT (M8 X 1.25 X 60mm)
59 8501-59 1MACHINE SCREW (M5 X 20mm)
60 8501-60 1MACHINE SCREW (M5 X 12mm)
61 8501-61 4WASHER (6mm / t = 1mm)
62 8501-62 8HEX HEAD BOLT (M8 X 16mm)
63 8501-63 2HEX HEAD BOLT (M8 X 45mm)
64 8501-64 8MACHINE SCREW (M6 X 35mm)
65 8501-65 1SPACER (L = 2mm)
66 8501-6610 2ALLEN HEAD BOLT (M10 X 70mm)
67 8501-67 2SCREW (M4 X 12mm)
68 8501-68 1SCREW (M4 X 25mm)
69 8501-69 5SCREW (M5 X 32mm)
70 8501-70 1FLY WHEEL SHAFT
71 8501-71 1SPACER (L = 14mm)
72 8501-72 2NYLOCK NUT (M10 X 1.25)
73 8501-73 2WASHER (10mm / t = 2mm)

STRETCHING
EXERCISES
WARM UP - COOL DOWN
Before and after exercising spend a few minutes slowly and
gently stretching and warming up.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
SHOULDER STRETCH
Bring one arm across the front of your
body at shoulder level.
Grasp the elbow of the extended arm
and gently pull until you feel a comfortable
stretch in your shoulder: Hold for 10
seconds then repeat with other arm.
CALF STRETCH
Place your hands on your thigh while you
press the heel of the opposite leg behind
you towards the floor. Hold for 10
seconds then repeat with other leg.
THIGH STRETCH
Stand with feet slightly apart (shoulder width).
Bend one leg and grasp your ankle, bring it
up as far as you can comfortably: Hold for
10 seconds then repeat with other leg.
ARM STRETCH
Stand with feet slightly apart
(shoulder width). Raise both
arms above your head.
Link fingers and gently press
upwards with palms up: Hold 10
seconds.
BACK STRETCH
Stand with feet slightly apart
(shoulder width). Grasp hands
behind your back.
Gently pressing away from your
back: Hold for 10 seconds.
HAMSTRING STRETCH
Extend one leg out in front of you.
Remember to keep your knees slightly bent.
Place your hands on the thigh of the opposite
leg to help support your upper body. Bend
forward from the waist until you feel the
stretch in the back of your thigh. Your back
should maintain its natural straight position
and your upper body weight should be
supported by your hands on your bent leg.
Hold this stretch for at least 10 seconds
then repeat with the other leg.

BEFORE EXERCISING CHECK:
You have adequate space ie. at least 2ft. (60cm) clearance on
each side.
Check all bolts and locking pins are secured and
not protruding. In particular check all the bolts and pins for
wear, replace doubtful parts before using the equipment.
Always use your elliptical trainer on a flat, level, solid surface.
Always work within your exercise level, do not work to exhaustion.
If you feel pain or unwell STOP YOUR WORKOUT IMMEDIATELY.
Injuries to health may result from incorrect or excessive training.
Please make sure you have read the safety guidelines.
Product may vary slightly from pictured.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
STEPPING ON
Make sure the nearest pedal to you
is downwards. Grasp the handlebars
securely with both hands.
Then step on. (Toes towards the
front of the pedal).
Your body should be centred over
the pedals, always remain in a
vertical, upright position.
TENSION KNOB
Change the level of difficulty of your
workout by adjusting the tension
knob. Begin with low tension. Adjust
resistance to intensify your workout
according to your personal fitness
level.
FORWARD ELLIPTICAL MOTION
Tones quadriceps, buttocks, lower
abdominal, hips and thighs.
Select a lead foot and press down
in a forward motion. Keep your
knees slightly bent. Make 4 full
cycles slowly then quickly. Repeat
according to exercise intensity.
Maintain a secure grip on handlebars
and keep your feet firmly in position
towards the front of the pedal.
ROUTINE: 4 FORWARD SLOW
4 FORWARD QUICK
REVERSE ELLIPTICAL MOTION
Strengthens hamstrings, lower
buttocks, hips, thighs and calves.
Select a lead foot and press down
in a reverse motion. Keep your
knees slightly bent. Make 4 full
cycles slowly then quickly. Repeat
according to exercise intensity.
Maintain a secure grip on handlebars
and keep your feet firmly in position
towards the front of the pedal.
ROUTINE: 4 REVERSE SLOW
4 REVERSE QUICK
EXERCISE
GUIDE

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
FORWARD & REVERSE
ELLIPTICAL MOTION
WORKOUT
Select a lead foot and press down in a
forward motion. Keep your knees
slightly bent. Make 2 full cycles slowly
then quickly. Pause - then make 2 full
cycles slowly then quickly in a reverse
motion. Maintain a secure grip on the
handlebars.
ROUTINE: 2 FORWARD SLOW
2 FORWARD QUICK
2 REVERSE SLOW
2 REVERSE QUICK
FORWARD SQUAT/KNEE
BEND WORKOUT
Select a lead foot and press down in a
forward motion. Keep your knees slightly
bent, pedal slowly - whilst pedalling
slowly lower your body (Approx 4 inches
- 10cm) keep your back straight and
vertical. In this position, make 8 full
cycles. Return to normal body position
and make 8 full cycles. Repeat for 4
cycles then 2 cycles.
ROUTINE: 8 FORWARD
(LOWERING YOUR BODY)
8 FORWARD
(NORMAL BODY POSITION)
REPEAT FOR 4 & 2 CYCLES. THEN
TRY THE WHOLE ROUTINE
PEDALLING IN REVERSE MOTION.
WORKOUTS: VARY YOUR WORKOUTS
AND MAKE UP NEW ROUTINES.
EXERCISE
GUIDE cont.i
Product may vary slightly from pictured.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
YORK ELLIPTICAL TRAINER 2100 /
COMPUTER INSTRUCTION
A. INSTRUCTION
Your computer is ideal for monitoring your performance and setting yourself targets.
By measuring your pulse rate you can ensure exercise safely.
At the same time you can monitor closely your improving condition and
cardiovascular fitness.
TO START/ Press SET button to activate unit.
The computer will automatically start/stop when you exercise.
B. POWER AND FUNCTIONS
Press the MODE key to alternate between options.
The selected function will be displayed on the screen.
The options are:
SCAN TIME SPEED DISTANCE CALORIES PULSE
The computer will shut off if no signal is received after several minutes.
STOP
SCAN
TMR
SPD DST
CAL PULSE
K

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
PULSE RATE SENSOR
FOR THE BEST RESULTS FOLLOW THESE INSTRUCTIONS:
1.) Remove any earrings etc.
2.) Rub your earlobe around 15 times to increase circulation.
3.) Make sure your ear is dry and keep your hair behind your ear so it dose not interfere.
4.) Clip the sensor to your earlobe as in (Diag. 2)
5.) Use the small clip to attach the wire to your shirt collar or other suitable place.
Allow enough wire spare to move freely without pulling the sensor off your ear. (Diag.3)
CHECK
,
Don t clip the sensor near holes pierced in your ear.
Try to avoid excessive vibration of the sensor or the sensor wire as this can lead to
inaccurate results.
If you are wearing a shirt with a collar attach the clothes clip to your collar.
This will help reduce excessive vibration.
CENTRE OF SENSOR
MIDDLE OF EARLOBE
SENSOR
EARLOBE
CLOTHES
CLIP
Clip the centre of the sensor
to the middle of the earlobe.
Clip the clothes clip to your
collar (If you are wearing a
shirt with a collar).

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
C. SETTING FUNCTIONS
You can set a target time or distance on your computer.
When you start exercising the computer will begin to count down from your
target to zero.
When it reaches zero an alarm will beep.
SCAN/ Automatically scans all functions in sequence displaying your progress
without requiring you to press the mode key.
TIME/ Counting commences when the ELLIPTICAL 2100 is active.
,,
To set timer countdown select TIME using MODE button.
Enter required time target by pressing SET button. (Max 99:59 MIN).
DISTANCE/ Distance is automatically displayed when the ELLIPTICAL 2100 is in use.
,,
To set target distance select DISTANCE function using MODE button.
Enter desired distance by pressing SET button. (Max 99.99KM).
CALORIES/ Approximate calories consumed is displayed, once the ELLIPTICAL 2100
is in use.
,,
To set target consumption select CALORIES using MODE button.
Enter target calories to be consumed using SET button. (Max 999 CAL.)
,, ,,
PULSE/ When using the ,PULSE, function a is displayed, and your current
(USE THE heart rate is shown.
STANDARD
EAR CLIP)
ALARM/ When targets/ limits have been reached an alarm will sound.
RESET/ Resets single function (Press and hold for several seconds)
for total reset.

FITNESS
Many things contribute to fitness and well being but the most important factor is the condition of your
heart and lungs and how efficient they are in delivering oxygen via your blood to your muscles.
Your muscles use this oxygen to provide enough energy for daily activity.
This is called aerobic activity (with oxygen).
When you are fit your heart and lungs work well and efficiently.
This means your heart will not have to work so hard. It will pump a lot fewer times per minute so
reducing the wear and tear on your heart.
This in turn reduces the chances of your suffering heart disease.
Fitness also helps you control your weight and reduces the effects of aging and stress.
You come across the need for fitness continually in everyday life.
When you are fit you can walk briskly up hills and stairs without being too out of breath once at the
top you recover quickly.
As you can see there are great advantages in being fit.
HOW TO IMPROVE YOUR FITNESS
Like any muscle in your body your heart can be strengthened by systematic physical exercise which
requires an increased blood flow and heart rate.
You can measure your heart rate by taking a pulse reading.
Your heart of pulse rate corresponds directly to your exertion level and exercise efficiency.
To improve your fitness in a safe and effective way you need to exercise at a high enough level to
improve your aerobic fitness.
The area between these 2 levels is called the target zone.
It is important to exercise at the right intensity to stay within this zone.
For the best results you should exercise within the target zone and gradually increase the duration.
Ideally you should aim to exercise (within zone) for at least 15-20 minutes continuously,
3-4 times per week.
CAUTION
DO NOT TRY TO DO TOO MUCH TO QUICKLY START GRADUALLY AND BUILD UP.
IF YOU BECOME ILL, IF YOU ARE UNDER DOCTOR CARE, OR OVER 35-40 AND NOT CURRENTLY
TAKING REGULAR EXERCISE THEN WE WOULD ADVISE YOU NOT TO START TO EXERCISE
WITHOUT CONSULTING YOUR DOCTOR.
EXERCISE GUIDE
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**

TARGET ZONE
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS EXERCISE.
REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES.
FIND YOUR OWN EXERCISE PULSE RATE RANGE BY
MOVING UP THE VERTICAL LINE FOR YOUR AGE.
Example: Age 40, the vertical line meets the 70% level at about 128 and the
85% level at about 154, pulse rate should remain between these values.
Use this graph to determine your personal target zone.
PULSE
RATE
MAXIMUM PULSE RATE
85% OF MAX.
55% OF MAX.
RESET PULSE
COOL DOWN LEVEL
COOL DOWN
TIME
WARM UP
70% OF MAX.
EXERCISE SO THAT YOUR PULSE STAYS IN
THIS RATE FOR AT LEAST 15-20 MINUTES
H
E
A
R
T
R
A
T
E
H
E
A
R
T
R
A
T
E
B
E
A
T
S
P
E
R
M
I
N
U
T
E
AGE IN YEARS
200
190
180
170
160
150
140
130
120
110
100
20 25 30 35 40 45 50 55 60 65
111
135
155
200 195
190
185
180
175
170
165
160
87% maximum
heart rate
174 169
165
161 157
152
148
143
139
144
140
136 133 130 125
122 119 115
TRAINING ZONE
The top of this bar
represents 100% of
maximum heart rate
for each age group.
The lower end of the
training zone represents
72% of maximum heart
rate for each age group.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**

HOW TO MONITOR YOUR HEART RATE DURING EXERCISE
,,
Now that you know where your training zone is, you ll I have to monitor yourself to be sure you re in it.
,, ,
Here s a simple rule, if you can t hold a conversation without gasping for breath you re probably above
your training zone. ,
,
To know precisely where you re working - making sure you re getting all the benefits -
We recommend you check your heart rate periodically throughout your workout.
You can use the electronic pulse monitor which will count and display your heart rate for you.
CONTROL YOUR PULSE RATE TO KEEP WITHIN ZONE
How hard you exercise affects your pulse rate, it is determined by two thing:
1. Rate: How fast you exercise.
e.g. Speed you cycle, run or step.
2
THE PULSE RATE RULES
If your pulse rate is too low exercise faster or increase load.
If your pulse rate is too high exercise slower or decrease load.
If your pulse rate goes up towards the end of your exercise, you are trying to exercise for too long,
shorten the time.
If your pulse rate does not quickly return to normal after exercise (5-10 minutes) you are not giving
your body chance to recover, reduce how often you exercise.
REMEMBER - GENERAL FITNESS IS BEST IMPROVED BY INCREASING HOW LONG
YOU EXERCISE RATHER THAN BY HOW HARD.
. Load: The resistance against which you exercise.
e.g. Tension you apply on cycle, step or run up hill.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**

HOW LONG TO EXERCISE?
To qualify as a true aerobic exercise with all the benefits we're mentioned, you must maintain your
heart rate within your training zone for at least 12 uninterrupted minutes.
If you exercise longer than 60 minutes the benefits are reduced and the risk of injury is increased.
If you're just starting out on a new exercise program we'recommend you stay at the 12 minute minimum
for at least a week. When you feel you're ready to go longer, increase your time no more than 10%
a week. Don't push yourself too hard.
You should never feel exhausted during or following exercise.
TEST YOUR FITNESS LEVEL AND CHECK YOUR PROGRESS
You can use your computer to control your exercise intensity and to monitor your progress.
The time it takes for your pulse to return to normal, after exercise, is an indicator of your fitness level.
During the first minute of your cool-down phase you will experience a drop in your pulse rate.
The bigger the drop in that minute -- the fitter you are.
TO CHECK YOUR PROGRESS:
1. Monitor your pulse rate the moment you end the aerobic phase of your workout and note your pulse rate.
2. Begin slowing down for the cool down phase.
3. After 60 seconds note the rate again.
The bigger the drop in that minute-the fitter you are.
To check your progress repeat this test every few weeks using the same duration and exercise intensity
each time.
Keep a record of the results to help you monitor your progress.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**