York International RHP Series Quick start guide

5612272-UTG-H-1221
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
RHP SERIES
SPLIT SYSTEM
HEAT PUMPS
14 SEER – R-410A – SINGLE-PHASE
1.5 TON TO 5 NOMINAL TON
MODELS: RHP14L18 TO 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.simplygettingthejobdone.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 5-Years limited compressor warranty.
Extended 10-Years limited parts and compressor warranty
when product is registered online within 90 days of purchase
for replacement or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or Internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR INSTALLATION IN ALL US REGIONS AND CANADA
Installation Allowed
®
TECHNICAL
GUIDE
TECHNICAL
GUIDE
DESCRIPTION
The RHP14L heat pumps are optimized for the 14 SEER / 8.2
HSPF Minimum Efficiency in all US Regions, and are specifi-
cally designed to be matched with Johnson Controls Ducted
Systems indoor coils, furnaces, and air handlers to provide a
complete system solution.
FEATURES
•Easier Installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
power and control wiring access. The factory installed filter-
drier and factory charge for a 15 ft lineset means less time
spent brazing and charging the system. The small base
dimension and reduced unit size make for easier retrofits.
•Durable Finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galva-
nized steel chassis components resist corrosion and rust
creep. Powdercoat paint further protects external panels.
•Louvered Coil Protection - Two stamped steel louvered
panels protect the coil from mechanical damage.
•Quality Coils - Enhanced aluminum fins are mechanically
bonded to copper tubing.
•Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high and low pressure
switches. The liquid line stainless steel filter-drier is factory
installed to protect the compressor against moisture and
debris.
•Environmentally Friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.
•Top Discharge - Air is blown up, away from the structure
and any landscaping and allows compact location on multi-
unit applications.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

5612272-UTG-H-1221
2 Johnson Controls Ducted Systems
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PHYSICAL AND ELECTRICAL DATA. . . . . . . . . . . . . . . . . . . . . . . 3
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SYSTEM CHARGE FOR VARIOUS MATCHED
SYSTEMS - N COIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SYSTEM CAPACITY - Single Piece and Modular Air Handlers. . 6
SYSTEM CAPACITY - Upflow, Downflow and Horizontal
Furnaces and Coils (Coil Only Ratings) . . . . . . . . . . . . . . . . . . . 10
SYSTEM CAPACITY - With High Efficiency Motor Furnaces . . 12
APPLICATION AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 36
SOUND POWER RATINGS - COOLING . . . . . . . . . . . . . . . . . . . . 36
SOUND POWER RATINGS - HEATING . . . . . . . . . . . . . . . . . . . . 37
MECHANICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . 37
TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TYPICAL FIELD WIRING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ALTERNATIVE INSTALLATION CLEARANCES . . . . . . . . . . . . . 39
PERFORMANCE DATA - 1.5 TON . . . . . . . . . . . . . . . . . . . . . . . . 40
PERFORMANCE DATA - 2 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PERFORMANCE DATA - 2.5 TON . . . . . . . . . . . . . . . . . . . . . . . . 51
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 58
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 70
PERFORMANCE DATA - 3.5 TON . . . . . . . . . . . . . . . . . . . . . . . . 76
PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 82
PERFORMANCE DATA - 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 86
NOMENCLATURE
BRAND RR= OTC Factory Branded
PRODUCT TYPE HP HP = Heat Pump
NOMINAL
SERIES EFFICIENCY
AND STAGING 14 14 = 14 SEER / 1-Stage
CABINET AND
CONNECTION TYPE LL= New Chassis
Louvered / Sweat Connect
NOMINAL
UNIT CAPACITY
(MBH) 36
18 = 1.5 Ton 36 = 3 Ton
24 = 2 Ton 42 = 3.5 Ton
30 = 2.5 Ton 48 = 4 Ton
35 = 3 Ton 60 = 5 Ton
REFRIGERANT BB = R-410A
VOLTAGE
(Voltage-Phase-Hertz) 22= 208/230-1-60
GENERATION
(MAJOR REVISION) 11= 1st Gen
2= 2nd Gen
FACTORY OPTION SS= Standard (No Options)
STYLE LETTER
(MINOR REVISION)
NOT USED FOR
ORDERING
AA= Style A
B= Style B

5612272-UTG-H-1221
Johnson Controls Ducted Systems 3
‡ The adapter fitting must be field installed for the required 1 1/8 in. refrigeration pip-
ing.
Notes:
• All dimensions are in inches and are subject to change without notice.
• The overall height is from the bottom of the base pan to the top of fan
guard.
• The overall length and width include screw heads.
PHYSICAL AND ELECTRICAL DATA
Model RHP14L18B
23S RHP14L24B 23S RHP14L30B 23S RHP14L35B 23S RHP14L36B 23S RHP14L42B 24S RHP14L48B 23S RHP14L60B 23S
Unit supply voltage 208 V to 230 V, 1 60 Hz
Normal voltage range1(V)
1. Rated in accordance with AHRI Standard 110-2012, utilization range A.
187 V to 252 V
Minimum circuit ampacity (A) 12.0 15.4 18.1 20.5 22.0 26.8 30.8 31.7
Maximum overcurrent device (A)2
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
20 25 30 35 35 45 50 50
Minimum overcurrent device (A)3
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
15 20 20 25 25 30 35 35
Compressor Type4
4. Rotary compressor models are limited to an equivalent length of refrigeration piping of 100 ft with no exceptions.
Scroll Scroll Scroll Scroll Scroll Scroll Scroll Scroll
Rated load (A) 9.0 11.7 13.4 15.4 15.4 19.2 23.6 24.3
Locked rotor (A) 56.3 61.6 72.5 83.9 83.9 123.9 130 144.2
Crankcase heater No No No No No No No No
Factory external discharge muffler Yes Yes Yes Yes Yes Yes Yes Yes
Hard start kit required with TXV5
5. Refer to the Hard Start Kit Accessory Installation Manual for the hard start kit part number for each model. The hard start kit is a field installed accessory.
No No No No No No No No
Hard start kit part number
(S1-2SA067*****) 10106 10106 10106 10106 10106 10106 10106 10106
Fan diameter (in.) 22 22 24 24 26 26 26 26
Fan motor
Type PSC PSC PSC PSC ECM ECM PSC PSC
Rated HP 1/8 1/8 1/4 1/4 1/3 1/3 1/4 1/4
Rated load (A) 0.80 0.80 1.30 1.30 2.8 2.8 1.30 1.30
Nominal RPM 1075 1075 850 850 834 834 850 850
Nominal CFM 2850 2850 2995 2995 3715 4000 4000 4100
Coil Face area (sq ft) 16.15 17.94 23.82 23.82 26.40 26.40 26.40 28.80 Rows deep 1 1 1 1 1 1 2 2
Fins per inch 22 22 22 22 22 22 18 18
Liquid refrigeration piping outdoor (field
installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor refrigeration piping outdoor (field
Installed)6
6. For applications with non-standard vapor line sizes, see the APPLICATIONS AND ACCESSORIES section.
3/4 3/4 3/4 3/4 3/4 7/8 7/8 1 1/8‡
Unit charge (lb - oz)7
7. The unit charge is correct for the outdoor unit, smallest matched indoor unit, and 15 ft of refrigerant tubing. For tubing lengths other than 15 ft, add or subtract refrigerant, using the
difference in actual refrigeration piping length multiplied by the per foot value.
‡ The adapter fitting must be field installed for the required 1 1/8 in. refrigeration piping.
5 - 3 5 - 6 6 - 12 8 - 1 8 - 15 8 - 11 13 - 3 13 - 13
Charge (oz/ft) 0.62 0.62 0.62 0.62 0.62 0.67 0.67 0.75
Operating weight (lb) 120 131 176 176 230 230 235 256
&
%
$
$
DIMENSIONS
Unit
model
Dimensions
(in.) Refrigerant connection service valve size (in.)
A B C Liquid Vapor
RHP14L18B23S 33 1/4 29 1/4 29 1/4
3/8
3/4
RHP14L24B23S 36 1/4 29 1/4 29 1/4
RHP14L30B23S 39 1/2 35 1/4 31 3/4
RHP14L35B23S 39 1/2 35 1/4 31 3/4
RHP14L36B23S 39 1/2 38 34 1/4
RHP14L42B24S 39 1/2 38 34 1/4 7/8
RHP14L48B23S 39 1/2 38 34 1/4
RHP14L60B23S 42 3/4 38 34 1/4 7/8‡

5612272-UTG-H-1221
4 Johnson Controls Ducted Systems
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS - N COIL
Outdoor unit RHP14L18
B23S RHP14L24 B23S RHP14L30 B23S RHP14L35 B23S RHP14L36 B23S RHP14L42 B24S RHP14L48 B23S RHP14L60 B23S
Required indoor
metering device1,2BA1 BA1 BA1 or BB1 BA1 or BB1 BA1 or BF1 BC1 BC1 BG1 or BC1
Defrost jumper pin setting 22233242
Indoor unit3,4,5 Additional charge (oz)
RFCX18BP 4 – – –––––
RFCX24BP 11 17 – –––––
RFCX30BP – 26 20 –––––
RFCX36BP – – 20 –––––
RFCX36CP – – – –––––
RFCX37CP – – – –3–––
RFCX42CP – – – –––––
RFCX48(CP,DP) – – – – – 27 – –
RFCX60(CP,DP) – – – –––––
RFCX18BE 4 – – –––––
RFCX24BE 11 17 – –––––
RFCX30BE – 26 13 –––––
RFCX36(BE,CE) – – 20 0––––
RFCX42CE – – 23 7 3 27 – –
RFCX48(CE,DE) – – – – 3 27 26 –
RFCX60CE – – – – – – 28 –
RFCX60DE – – – ––––5
CF/CM/CU18(A,B) 4 – – –––––
CF/CM/CU24(A,B) 11 17 – –––––
CF/CM/CU30(A,B,C) – 26 13 –––––
CF/CM/CU36(A,B,C) – – 20 0––––
CF/CM/CU42(B,C,D) – – 23 8––––
CF/CM/CU48(C,D) – – – 7 3 27 26 –
CF/CM/CU60(C,D) – – – – – – 28 –
CF/CM64D – – – ––––5
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, see the “SYSTEM CAPACITY - Upflow, Downflow and Horizontal Furnaces and Coils” table.
1. For applications that require a TXV, use S1-1TVM*** series kit.
2. Approved orifice(s) are shipped with the outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower time delay.
4. Do not use CF coils in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. See the performance data tables for actual performance for specified system
matches. Obtain certified system ratings from www.ahridirectory.org.

5612272-UTG-H-1221
Johnson Controls Ducted Systems 5
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS - A COIL
CHARGING
1. Check the factory unit charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit,
and the 15 ft of interconnecting refrigeration piping.
2. Verify the indoor metering device and additional charge required for the specific matched indoor unit in the system using the table above.
3. Add additional charge for the amount of interconnecting refrigeration piping greater than 15 ft at the rate specified in the Physical and electrical
data table.
4. For installations requiring additional charge, weigh in refrigerant for the specific matching indoor unit and actual refrigeration piping length.
5. After weighing in the charge adders for the matched indoor unit and refrigeration piping, verify the system operation against the temperatures
and pressures in the charging chart for the outdoor unit. Locate the charging charts on the outdoor unit and also in the Service Data Application
Guide on www.simplygettingthejobdone.com. Follow the subcool or superheat charging procedure in the Installation Manual according to the
type of indoor metering device in the system, and allow 10 min after each charge adjustment for the system operation to stabilize. Record the
charge adjustment made to match the charging chart.
6. Permanently stamp the unit nameplate with the total system charge defined as follows: total system charge = base charge (as shipped) +
charge adder for matched indoor unit + charge adder for actual refrigeration piping length + charge adjustments to match the charging chart.
Outdoor unit RHP14L18B23
SRHP14L24B23 SRHP14L30B23 SRHP14L36B23 SRHP14L42B24 SRHP14L48B23 SRHP14L60B23 S
Required indoor
metering device1,2
1. For applications that require a TXV, use S1-1TVM*** series kit.
2. Use a TXV kit with these indoor units to obtain system performance.
BA BA1 BA1 BC1 BC1 BC1 BC1
Defrost jumper pin
setting 2223242
Indoor unit 3,4,5
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower time delay.
4. Do not use XAH coils in upflow or downflow applications. Do not use XAF coils in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. See the performance data tables for actual performance for specified system
matches. Obtain certified system ratings from www.ahridirectory.org.
Additional charge (oz)
XAF/XAUA24B 12 0 – – – – –
XAFB24B 12 0 – – – – –
XAF/XAUB30C ––0––––
XAFA30D –––0–––
XAFC30C ––0––––
XAF/XAUB36D –––0–––
XAFC36D –––0–––
XAF/XAUC48F –––12––
XAFD48F –––12––
XAF/XAUD60G ––––281–
XAFD60J ––––––0
XAH24B (A,B) 12 7 – – – – –
XAH30C (B,C) ––5––––
XAH36D (B,C) –––1–––
XAH48F (C,D) –––20––
XAHD60G ––––50–
XAHD60J ––––––4
Note: Some of the combinations shown in this table require advanced main air circulating fan indoor product. For approved coil only matches, see
the SYSTEM CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings) table.

5612272-UTG-H-1221
6 Johnson Controls Ducted Systems
SYSTEM CAPACITY - Single Piece and Modular Air Handlers
UNIT
MODEL
AIR HANDLER COIL
MODEL3RATED CFM
COOLING 1HEATING 2
MODEL WIDTH NET MBH SEER EER NET MBH HSPF
Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD
RHP14L18B23S RFCX18BE06MP22 17.5 — 600 18.0 13.6 15.25 12.75 17.6 11.7 8.75 — 3.78 2.56
RHP14L18B23S RFCX24BE08MP22 17.5 — 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.40 3.90 2.60
RHP14L18B23S RFCX18BP06MP22 17.5 — 600 18.0 12.8 14.00 12.00 18.2 12.1 9.00 7.65 3.52 2.38
RHP14L18B23S RFCX24BP08MP22 17.5 — 600 18.0 13.6 14.00 12.00 18.0 12.0 8.20 — 3.54 2.42
RHP14L18B23S ME08BN21 17.5 CF/CM18B 575 18.0 13.6 15.75 13.00 18.0 11.6 9.00 7.60 3.68 2.54
RHP14L18B23S ME08BN21 17.5 CF/CM24B 575 18.0 13.5 15.75 13.00 18.0 11.6 9.00 7.50 3.76 2.54
RHP14L18B23S ME08BN21 17.5 CF18BBAA1 600 18.0 13.6 15.00 12.75 17.3 11.7 9.00 — 3.80 2.56
RHP14L18B23S ME08BN21 17.5 CF24BBAA1 575 18.0 13.5 15.75 13.00 18.0 11.6 9.00 7.50 3.76 2.54
RHP14L18B23S ME08BN21 17.5 CM24BBAA1 600 18.0 13.6 15.25 12.75 17.5 11.7 9.00 — 3.84 2.60
RHP14L18B23S ME12BN21 17.5 CF/CM18B 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.45 3.88 2.58
RHP14L18B23S ME12BN21 17.5 CF/CM24B 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.40 3.90 2.60
RHP14L18B23S ME12BN21 17.5 CF18BBAA1 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.45 3.88 2.58
RHP14L18B23S ME12BN21 17.5 CF24BBAA1 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.40 3.90 2.60
RHP14L18B23S ME12BN21 17.5 CM24BBAA1 600 17.8 13.3 14.00 12.00 17.5 12.0 8.50 — 3.60 2.44
RHP14L18B23S ME12BN21 17.5 XAHB24B 650 18.0 14.3 14.50 12.00 17.4 10.3 8.20 6.40 3.60 2.20
RHP14L24B23S RFCX24BE08MP22 17.5 — 675 24.0 17.6 15.75 13.00 24.0 14.8 8.50 7.15 3.60 2.42
RHP14L24B23S RFCX30BE10MP22 17.5 — 750 24.0 17.5 15.75 13.00 24.0 14.9 9.50 7.95 4.00 2.72
RHP14L24B23S RFCX24BP08MP22 17.5 — 800 23.8 17.0 14.00 11.75 24.0 15.4 8.55 7.40 3.50 2.32
RHP14L24B23S RFCX30BP10MP22 17.5 — 800 24.0 18.5 15.25 12.25 24.0 15.6 8.50 — 3.80 2.54
RHP14L24B23S ME08BN21 17.5 CF/CM24B 800 24.0 19.4 15.75 13.00 24.0 14.8 8.75 7.35 3.74 2.44
RHP14L24B23S ME08BN21 17.5 CF/CM30B 800 24.0 18.0 15.75 13.00 24.0 15.0 9.50 7.95 4.02 2.72
RHP14L24B23S ME08BN21 17.5 CF24BBAA1 800 24.0 19.4 15.75 13.00 24.0 14.8 8.75 7.35 3.74 2.44
RHP14L24B23S ME08BN21 17.5 CF30BBAA1 800 24.0 18.7 16.00 13.00 23.8 15.3 8.50 — 3.98 2.68
RHP14L24B23S ME08BN21 17.5 CM24BBAA1 800 24.0 17.6 15.50 12.75 23.4 14.9 8.50 — 3.72 2.46
RHP14L24B23S ME08BN21 17.5 CM30BBAA1 800 24.0 18.7 16.00 13.00 23.8 15.3 8.50 — 3.98 2.68
RHP14L24B23S ME08BN21 17.5 XAFB24B 775 23.8 17.3 14.50 12.00 23.4 14.5 8.20 6.35 3.56 2.34
RHP14L24B23S ME08BN21 17.5 XAHB24B 900 24.0 19.0 14.50 12.00 23.2 15.3 8.20 6.50 3.56 2.42
RHP14L24B23S ME12BN21 17.5 CF/CM24B 675 24.0 17.6 15.75 13.00 24.0 14.8 8.50 7.15 3.60 2.42
RHP14L24B23S ME12BN21 17.5 CF/CM30B 675 24.0 16.8 15.75 13.00 24.0 15.0 9.25 7.80 3.88 2.70
RHP14L24B23S ME12BN21 17.5 CF24BBAA1 675 24.0 17.6 15.75 13.00 24.0 14.8 8.50 7.15 3.60 2.42
RHP14L24B23S ME12BN21 17.5 CF30BBAA1 800 24.0 18.7 16.00 13.00 24.0 15.4 8.50 — 3.96 2.66
RHP14L24B23S ME12BN21 17.5 CM24BBAA1 800 24.0 17.6 15.50 12.75 23.4 14.9 8.50 — 3.70 2.44
RHP14L24B23S ME12BN21 17.5 CM30BBAA1 800 24.0 18.7 16.00 13.00 24.0 15.4 8.50 — 3.96 2.66
RHP14L24B23S ME12BN21 17.5 XAFB24B 850 24.0 18.0 14.50 12.00 23.6 14.5 8.20 6.35 3.68 2.40
RHP14L24B23S ME12BN21 17.5 XAHB24B 850 24.0 18.8 14.50 12.00 23.0 15.1 8.20 6.65 3.52 2.42

5612272-UTG-H-1221
Johnson Controls Ducted Systems 7
RHP14L24B23S ME12CN21 21.0 CF/CM24C 600 23.8 16.6 15.50 13.00 24.0 14.9 8.20 6.95 3.46 2.38
RHP14L24B23S ME14DN21 24.5 CF/CM30D 800 24.0 18.6 15.75 12.75 24.0 15.5 8.50 — 3.88 2.60
RHP14L24B23S ME16CN21 21.0 CF/CM24C 875 24.0 18.2 14.25 12.00 24.0 15.3 8.25 — 3.62 2.36
RHP14L24B23S ME16CN21 21.0 CF/CM30C 925 24.0 19.2 15.75 13.00 24.0 15.0 9.50 7.85 4.16 2.76
RHP14L30B23S RFCX30BE10MP22 17.5 — 900 29.4 22.6 15.75 13.00 30.0 19.5 9.50 7.95 3.94 2.74
RHP14L30B23S RFCX36BE12MP22 17.5 — 1000 30.0 23.8 15.75 13.00 30.0 20.0 9.50 7.55 4.44 2.96
RHP14L30B23S RFCX36CE12MP22 21.0 — 825 29.8 21.8 15.75 13.00 30.0 19.8 9.50 7.65 4.34 2.96
RHP14L30B23S RFCX30BP10MP22 17.5 — 1000 28.8 21.6 14.00 12.00 29.6 20.0 9.85 8.45 3.74 2.62
RHP14L30B23S ME12BN21 17.5 CF/CM30B 850 29.2 22.0 15.75 13.00 30.0 19.4 9.50 7.95 3.94 2.74
RHP14L30B23S ME12BN21 17.5 CF/CM36B 850 29.6 22.2 15.75 13.00 30.0 19.9 9.50 7.60 4.34 2.94
RHP14L30B23S ME12BN21 17.5 XAF/
XAUB30C 1050 29.0 23.0 14.50 12.00 29.0 18.5 8.55 6.60 3.64 2.40
RHP14L30B23S ME12BN21 17.5 XAF/
XAUB36D 1025 29.2 22.1 15.00 12.50 28.6 18.6 9.00 7.05 3.76 2.58
RHP14L30B23S ME12BN21 17.5 XAHB30C 1025 29.0 22.8 15.00 12.50 29.0 18.7 8.55 6.65 3.68 2.48
RHP14L30B23S ME12BN21 17.5 XAHB36D 1000 29.0 22.6 14.50 12.50 28.2 18.3 9.00 7.30 3.68 2.54
RHP14L30B23S ME12CN21 21.0 CF/CM30C 825 29.0 21.4 15.75 13.00 30.0 19.4 9.50 8.00 3.88 2.74
RHP14L30B23S ME12CN21 21.0 XAFC30C 1200 29.0 24.2 15.00 12.50 29.0 18.6 8.55 6.50 3.78 2.44
RHP14L30B23S ME12CN21 21.0 XAFC36D 950 29.0 21.6 15.00 12.50 28.4 18.4 9.00 7.20 3.74 2.56
RHP14L30B23S ME12CN21 21.0 XAHC30C 950 28.4 22.1 15.00 12.50 28.0 18.6 8.55 6.75 3.64 2.48
RHP14L30B23S ME12CN21 21.0 XAHC36D 925 28.8 21.9 15.00 12.50 28.0 18.1 9.00 7.10 3.64 2.54
RHP14L30B23S ME14DN21 24.5 CF/CM30D 825 29.0 21.4 15.75 13.00 30.0 19.4 9.50 8.00 3.88 2.74
RHP14L30B23S ME14DN21 24.5 CF/CM36D 825 29.8 21.8 15.75 13.00 30.0 19.8 9.50 7.60 4.34 2.96
RHP14L30B23S ME16CN21 21.0 CF/CM30C 900 29.4 22.6 15.75 13.00 29.8 19.4 9.50 7.95 3.96 2.74
RHP14L30B23S ME16CN21 21.0 CF/CM36C 900 30.0 22.8 15.75 13.00 30.0 19.8 9.50 7.55 4.40 2.96
RHP14L30B23S ME16CN21 21.0 XAFC30C 1075 29.0 23.1 15.00 12.50 29.0 18.5 8.55 6.80 3.68 2.40
RHP14L30B23S ME16CN21 21.0 XAFC36D 1050 29.4 22.4 15.00 12.50 28.6 18.6 9.00 7.15 3.80 2.60
RHP14L30B23S ME16CN21 21.0 XAHC30C 1050 29.0 23.0 15.00 12.50 29.0 18.6 8.55 6.60 3.72 2.48
RHP14L30B23S ME16CN21 21.0 XAHC36D 1025 29.2 23.0 15.00 12.50 28.2 18.3 9.00 7.15 3.72 2.56
RHP14L35B23S RFCX36BE12MP22 17.5 — 1000 34.6 25.4 14.00 12.25 34.0 22.0 8.20 7.35 3.48 2.30
RHP14L35B23S RFCX36CE12MP22 21.0 — 1225 35.2 26.2 14.50 12.00 34.0 21.6 8.90 7.70 3.64 2.48
RHP14L35B23S ME12BN21 17.5 CF/CM36B 1050 34.6 26.0 14.25 12.20 34.0 21.8 8.55 7.40 3.52 2.44
RHP14L35B23S ME12BN21 17.5 CF42B 1050 35.0 26.2 14.50 12.20 33.6 21.6 8.55 7.40 3.60 2.44
RHP14L35B23S ME12CN21 21.0 CF/CM36C 1000 34.6 25.4 14.25 12.25 33.8 22.0 8.20 7.40 3.50 2.32
RHP14L35B23S ME14DN21 24.5 CF/CM36D 825 33.6 23.0 14.75 12.20 33.6 21.8 8.20 7.30 3.36 2.30
RHP14L35B23S ME16CN21 21.0 CF/CM36C 1100 34.8 26.8 14.50 12.25 33.8 21.6 8.55 7.40 3.58 2.46
RHP14L35B23S ME16CN21 21.0 CF/CM42C 1100 35.6 27.0 14.75 12.25 33.6 21.4 8.55 7.35 3.64 2.46
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL3RATED
CFM
COOLING 1HEATING 2
MODEL WIDTH NET MBH SEER EER NET MBH HSPF
Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
8 Johnson Controls Ducted Systems
RHP14L36B23S RFCX42CE14MP22 21.0 — 1000 36.0 25.8 15.75 13.00 34.8 22.4 8.75 — 3.64 2.58
RHP14L36B23S RFCX48CE16MP22 21.0 — 1050 36.0 27.3 15.75 12.75 34.8 22.4 9.00 7.70 3.70 2.60
RHP14L36B23S RFCX48DE16MP22 24.5 — 1050 36.0 27.5 16.00 13.00 34.8 22.4 9.00 7.65 3.76 2.62
RHP14L36B23S RFCX37CP12MP22 21.0 — 1200 36.0 25.2 14.00 12.00 35.8 23.4 8.75 7.75 3.54 2.46
RHP14L36B23S RFCX48DP16MP22 24.5 — 1350 36.0 30.6 14.00 11.75 36.0 23.6 8.50 7.75 3.56 2.46
RHP14L36B23S ME12CN21 21.0 CF/CM48C 1000 36.0 26.7 15.75 12.75 34.8 22.6 8.75 7.50 3.62 2.58
RHP14L36B23S ME14DN21 24.5 CF/CM48D 1025 36.0 27.1 16.00 13.00 34.8 22.4 9.00 7.70 3.66 2.58
RHP14L36B23S ME16CN21 21.0 CF/CM48C 1100 36.0 28.0 15.75 12.75 35.0 22.6 9.00 7.70 3.70 2.58
RHP14L36B23S ME20DN21 24.5 CF/CM48D 1275 36.0 30.3 16.00 13.00 34.8 22.4 9.25 7.85 3.82 2.64
RHP14L36B23S ME12BN21 17.5 XAF/
XAUB36D 1200 35.4 26.2 14.50 12.50 35.6 23.4 8.55 7.00 3.54 2.40
RHP14L36B23S ME12BN21 17.5 XAHB36D 1275 35.6 27.3 14.00 12.00 35.6 23.0 8.20 6.65 3.44 2.34
RHP14L36B23S ME12CN21 21.0 XAF/
XAUC48F 1200 35.6 27.3 15.00 12.50 35.6 23.2 9.00 7.35 3.74 2.56
RHP14L36B23S ME12CN21 21.0 XAFC36D 1250 35.6 26.8 15.00 12.50 35.6 23.4 8.55 6.85 3.60 2.42
RHP14L36B23S ME12CN21 21.0 XAHC36D 1250 35.6 27.2 14.50 12.50 35.0 22.8 8.20 6.55 3.48 2.36
RHP14L36B23S ME12CN21 21.0 XAHC48F 1250 35.4 26.8 14.50 12.00 34.6 23.0 9.00 7.45 3.68 2.58
RHP14L36B23S ME14DN21 24.5 XAFD48F 1175 35.6 27.1 15.00 12.50 35.6 23.0 9.00 7.35 3.76 2.56
RHP14L36B23S ME14DN21 24.5 XAHD48F 1175 35.2 26.1 15.00 12.50 34.2 22.8 9.00 7.40 3.68 2.62
RHP14L36B23S ME16CN21 21.0 XAF/
XAUC48F 1300 35.6 28.1 15.00 12.50 35.6 23.4 9.00 7.30 3.78 2.56
RHP14L36B23S ME16CN21 21.0 XAFC36D 1300 35.6 27.2 15.00 12.50 35.6 23.4 8.55 6.75 3.64 2.42
RHP14L36B23S ME16CN21 21.0 XAHC36D 1275 35.6 27.5 14.50 12.00 35.0 22.8 8.20 6.55 3.48 2.36
RHP14L36B23S ME16CN21 21.0 XAHC48F 1050 34.8 24.7 14.50 12.50 34.0 22.8 8.55 6.95 3.58 2.60
RHP14L36B23S ME20DN21 24.5 XAFD48F 1225 35.6 27.6 15.00 12.50 35.6 23.0 9.00 7.20 3.80 2.60
RHP14L36B23S ME20DN21 24.5 XAHD48F 1225 35.6 26.8 15.00 12.50 34.2 22.6 9.00 7.25 3.74 2.64
RHP14L42B24S RFCX42CE14MP22 21.0 — 1150 40.0 29.1 15.00 12.25 40.0 25.2 8.20 7.25 3.36 2.64
RHP14L42B24S RFCX48CE16MP22 21.0 — 1200 40.5 30.0 15.25 12.25 40.0 25.2 8.20 7.25 3.44 2.66
RHP14L42B24S RFCX48DE16MP22 24.5 — 1250 40.5 30.6 15.50 12.50 39.5 25.0 8.50 7.50 3.50 2.70
RHP14L42B24S RFCX48CP16MP22 21.0 — 1450 41.0 30.2 14.00 11.75 40.5 25.8 8.20 7.55 3.34 2.58
RHP14L42B24S RFCX48DP16MP22 24.5 — 1475 41.0 33.3 14.00 11.25 40.5 26.0 8.20 7.25 3.36 2.56
RHP14L42B24S ME14DN21 24.5 CF/CM48D 1200 40.5 30.0 15.25 12.25 40.0 25.2 8.20 7.25 3.40 2.66
RHP14L42B24S ME14DN21 24.5 CM48DBCA1 1200 40.5 30.0 15.25 12.25 40.0 25.2 8.20 7.25 3.40 2.66
RHP14L42B24S ME14DN21 24.5 XAF/
XAUD60G 1500 41.0 31.0 14.00 11.50 40.5 25.6 8.20 6.70 3.70 2.52
RHP14L42B24S ME14DN21 24.5 XAFD48F 1175 39.0 28.1 15.00 12.00 38.5 24.6 8.55 7.05 3.68 2.52
RHP14L42B24S ME14DN21 24.5 XAHD48F 1175 38.0 26.9 14.50 12.00 36.8 24.2 8.20 6.80 3.52 2.48
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL3RATED
CFM
COOLING 1HEATING 2
MODEL WIDTH NET MBH SEER EER NET MBH HSPF
Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
Johnson Controls Ducted Systems 9
1. Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period.
2. Heating MBH based on AHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period.
COP (Coefficient of Performance) equals Heating MBH output divided by (total KW input x 3.412).
3. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number. — = Not applicable.
RHP14L42B24S ME14DN21 21.0 XAHD60G 1475 40.0 30.3 14.00 11.00 39.5 25.2 8.20 6.60 3.64 2.48
RHP14L42B24S ME16CN21 21.0 CF/CM48C 1325 40.5 31.4 15.00 12.20 40.0 25.4 8.20 7.25 3.42 2.64
RHP14L42B24S ME16CN21 21.0 CF48CBCA1 1325 40.5 31.4 15.00 12.20 40.0 25.4 8.20 7.25 3.42 2.64
RHP14L42B24S ME16CN21 21.0 CM48CBCA1 1325 40.5 31.4 15.00 12.20 40.0 25.4 8.20 7.25 3.42 2.64
RHP14L42B24S ME16CN21 21.0 XAF/
XAUC48F 1300 39.0 28.9 14.50 12.00 39.0 25.0 8.55 7.05 3.70 2.50
RHP14L42B24S ME16CN21 21.0 XAHC48F 1475 39.0 29.7 14.00 11.50 38.0 24.8 8.20 6.70 3.58 2.46
RHP14L42B24S ME20DN21 24.5 CF/CM48D 1275 41.0 31.2 15.50 12.50 39.5 25.2 8.50 7.50 3.46 2.66
RHP14L42B24S ME20DN21 24.5 CM48DBCA1 1275 41.0 31.2 15.50 12.50 39.5 25.2 8.50 7.50 3.46 2.66
RHP14L42B24S ME20DN21 24.5 XAF/
XAUD60G 1475 41.0 30.9 14.00 11.50 40.0 25.4 8.20 6.65 3.72 2.54
RHP14L42B24S ME20DN21 24.5 XAFD48F 1475 40.0 30.9 15.00 12.00 39.0 25.0 8.55 6.95 3.84 2.56
RHP14L42B24S ME20DN21 24.5 XAHD48F 1475 39.0 29.7 14.50 12.00 37.6 24.4 8.55 7.10 3.68 2.52
RHP14L42B24S ME20DN21 21.0 XAHD60G 1450 40.0 30.2 14.00 11.50 39.5 25.0 8.20 6.45 3.66 2.50
RHP14L48B23S RFCX48CE16MP22 21.0 — 1400 46.0 31.8 14.25 12.00 47.5 31.4 9.00 — 3.58 2.64
RHP14L48B23S RFCX48DE16MP22 24.5 — 1400 46.5 32.0 14.50 12.25 47.5 31.4 9.00 — 3.62 2.66
RHP14L48B23S ME14DN21 24.5 CF/CM48D 1400 46.5 32.0 14.50 12.25 47.5 31.4 9.00 — 3.60 2.66
RHP14L48B23S ME14DN21 24.5 CF/CM60D 1400 46.5 32.0 14.25 12.00 48.0 31.4 9.00 — 3.54 2.60
RHP14L48B23S ME14DN21 24.5 CM48DBCA1 1400 46.5 32.0 14.50 12.25 47.5 31.4 9.00 — 3.60 2.66
RHP14L48B23S ME16CN21 21.0 CF/CM48C 1400 46.0 31.8 14.50 12.00 47.5 31.4 9.00 — 3.58 2.64
RHP14L48B23S ME16CN21 21.0 CF/CM60C 1400 47.0 32.2 14.50 12.25 47.5 31.2 9.00 — 3.58 2.62
RHP14L48B23S ME16CN21 21.0 CF48CBCA1 1400 46.0 31.8 14.50 12.00 47.5 31.4 9.00 — 3.58 2.64
RHP14L48B23S ME16CN21 21.0 CM48CBCA1 1400 46.0 31.8 14.50 12.00 47.5 31.4 9.00 — 3.58 2.64
RHP14L48B23S ME20DN21 24.5 CF/CM48D 1400 46.5 31.8 14.50 12.00 47.5 31.4 9.00 — 3.60 2.66
RHP14L48B23S ME20DN21 24.5 CF/CM60D 1400 47.0 32.2 14.75 12.25 47.5 31.2 9.00 — 3.58 2.64
RHP14L48B23S ME20DN21 24.5 CM48DBCA1 1400 46.5 31.8 14.50 12.00 47.5 31.4 9.00 — 3.60 2.66
RHP14L48B23S ME20DN21 21.0 XAHD60G 1650 46.5 35.1 14.50 12.00 47.0 31.4 9.00 7.35 3.88 2.80
RHP14L60B23S RFCX60DE20MP22 24.5 — 1650 55.5 38.6 14.00 12.00 57.0 37.8 9.00 8.65 3.88 2.82
RHP14L60B23S ME20DN21 24.5 CF/CM64D 1600 55.0 38.0 14.25 12.00 57.0 37.6 9.25 - 3.88 2.82
RHP14L60B23S ME20DN21 24.5 XAFD60J 1675 54.5 41.5 14.00 11.50 57.0 38.0 9.00 7.35 3.84 2.76
RHP14L60B23S ME20DN21 24.5 XAHD60J 1650 55.5 40.3 14.00 11.50 56.0 38.0 9.00 7.50 3.78 2.76
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL3RATED CFM
COOLING 1HEATING 2
MODEL WIDTH NET MBH SEER EER NET MBH HSPF
Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
10 Johnson Controls Ducted Systems
SYSTEM CAPACITY - Upflow, Downflow and Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL COIL CFM RANGE
(MIN.-MAX.)
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD
RHP14L18B23S CF/CM/CU18A 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.38
RHP14L18B23S CF/CM/CU18B 17.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.38
RHP14L18B23S CF/CM/CU24A 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L18B23S CF/CM/CU24B 17.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L18B23S CF/CM24C 21.0 450 - 750 600 17.8 12.6 14.00 12.00 17.5 12.1 8.55 — 3.48 2.36
RHP14L18B23S CF/CM24C 21.0 450 - 750 600 17.8 12.6 14.00 12.00 17.5 12.1 8.55 — 3.48 2.36
RHP14L18B23S CF18ABAA1 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.38
RHP14L18B23S CF18BBAA1 17.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.38
RHP14L18B23S CF24ABAA1 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L18B23S CF24BBAA1 17.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L18B23S CM18ABAA1 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.38
RHP14L18B23S CM24ABAA1 14.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L18B23S CM24BBAA1 17.5 450 - 750 600 18.0 13.9 14.00 12.20 18.0 12.1 8.75 7.40 3.52 2.40
RHP14L24B23S CF/CM/CU24A 14.5 600 - 1000 675 23.6 17.2 14.00 11.50 24.0 15.4 8.20 6.95 3.40 2.30
RHP14L24B23S CF/CM/CU24B 17.5 600 - 1000 800 24.0 18.7 14.00 11.50 24.0 15.4 8.20 6.95 3.50 2.32
RHP14L24B23S CF/CM/CU30A 14.5 600 - 1000 675 24.0 18.0 14.75 12.50 24.0 15.6 8.75 7.45 3.62 2.52
RHP14L24B23S CF/CM/CU30B 17.5 600 - 1000 800 24.0 19.2 14.25 12.20 24.0 15.8 9.00 7.60 3.70 2.50
RHP14L24B23S CF/CM/CU30D 24.5 600 - 1000 800 24.0 18.3 14.50 12.00 24.0 15.9 8.25 — 3.70 2.50
RHP14L24B23S CF/CM24C 21.0 600 - 1000 800 23.6 17.2 14.00 11.50 24.0 15.4 8.25 — 3.50 2.32
RHP14L24B23S CF/CM30C 21.0 600 - 1000 800 24.0 18.3 14.50 12.00 24.0 15.9 8.25 — 3.70 2.50
RHP14L24B23S CF24ABAA1 14.5 600 - 1000 675 23.6 17.2 14.00 11.50 24.0 15.4 8.20 6.95 3.40 2.30
RHP14L24B23S CF24BBAA1 17.5 600 - 1000 800 24.0 18.7 14.00 11.50 24.0 15.4 8.20 6.95 3.50 2.32
RHP14L24B23S CF30ABAA1 14.5 600 - 1000 675 24.0 18.0 14.75 12.50 24.0 15.6 8.75 7.45 3.62 2.52
RHP14L24B23S CF30BBAA1 17.5 600 - 1000 800 24.0 19.2 14.25 12.20 24.0 15.8 9.00 7.60 3.70 2.50
RHP14L24B23S CM24ABAA1 14.5 600 - 1000 675 23.6 17.2 14.00 11.50 24.0 15.4 8.20 6.95 3.40 2.30
RHP14L24B23S CM24BBAA1 17.5 600 - 1000 800 24.0 18.7 14.00 11.50 24.0 15.4 8.20 6.95 3.50 2.32
RHP14L24B23S CM30BBAA1 17.5 600 - 1000 800 24.0 19.2 14.25 12.20 24.0 15.8 9.00 7.60 3.70 2.50
RHP14L24B23S XAF/XAUA24B 14.5 600 - 1000 800 23.4 17.0 14.00 11.50 24.0 15.1 8.20 6.75 3.38 2.24
RHP14L30B23S CF/CM/CU30B 17.5 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S CF/CM/CU30C 21.0 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S CF/CM/CU30D 24.5 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S CF/CM/CU36B 17.5 800 - 1200 1000 29.6 23.6 14.00 12.00 30.0 20.6 8.55 6.80 4.16 2.80
RHP14L30B23S CF/CM/CU36C 21.0 800 - 1200 1000 29.6 23.6 14.00 12.00 30.0 20.6 8.55 6.80 4.16 2.80
RHP14L30B23S CF/CM/CU36D 24.5 800 - 1200 1000 29.6 23.6 14.00 12.00 30.0 20.6 8.55 6.80 4.16 2.80
RHP14L30B23S CF/CM/CU42C 21.0 800 - 1200 1000 29.2 21.8 14.00 12.00 29.2 19.6 8.50 — 3.74 2.60
RHP14L30B23S CF/CM30C 21.0 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S CF/CM36A 14.5 800 - 1200 1000 29.6 23.6 14.00 12.00 30.0 20.6 8.55 6.80 4.16 2.80

5612272-UTG-H-1221
Johnson Controls Ducted Systems 11
— = Not Applicable.
Furnaces that are listed individually in the above table use Coil Only Ratings.
RHP14L30B23S CF/CM36D 24.5 800 - 1200 1000 29.6 23.6 14.00 12.00 30.0 20.6 8.55 6.80 4.16 2.80
RHP14L30B23S CF/CM42D 24.5 800 - 1200 1000 29.2 21.8 14.00 12.00 29.2 19.6 8.50 — 3.74 2.60
RHP14L30B23S CF30BBBA1 17.5 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S CM30BBBA1 17.5 800 - 1200 1000 29.0 23.4 14.00 11.75 30.0 20.0 8.55 7.15 3.74 2.62
RHP14L30B23S XAF/XAUB30C 17.5 800 - 1200 1000 28.4 21.9 14.00 11.50 29.0 19.1 8.20 6.60 3.40 2.28
RHP14L30B23S XAFC30C 21.0 800 - 1200 1000 28.4 21.9 14.00 11.50 29.0 19.1 8.20 6.60 3.40 2.28
RHP14L30B23S XAHB30C 17.5 800 - 1200 1000 28.0 21.9 14.00 11.50 29.0 19.3 8.20 6.60 3.48 2.36
RHP14L30B23S XAHC30C 21.0 800 - 1200 1000 28.0 21.9 14.00 11.50 29.0 19.3 8.20 6.60 3.48 2.36
RHP14L36B23S CF/CM/CU48C 21.0 1000 - 1400 1200 36.0 28.7 14.25 12.20 35.8 23.4 8.50 7.75 3.54 2.46
RHP14L36B23S CF/CM/CU48D 24.5 1000 - 1400 1200 36.0 28.7 14.25 12.20 35.8 23.4 8.50 7.75 3.54 2.46
RHP14L42B24S CF/CM/CU48C 21.0 1200 - 1600 1400 40.5 31.9 14.00 11.25 40.5 26.0 8.20 7.30 3.32 2.54
RHP14L42B24S CF/CM/CU48D 24.5 1200 - 1600 1400 40.5 31.9 14.00 11.25 40.5 26.0 8.20 7.30 3.32 2.54
RHP14L42B24S CF48CBCA1 21.0 1200 - 1600 1400 40.5 31.9 14.00 11.25 40.5 26.0 8.20 7.30 3.32 2.54
RHP14L42B24S CM48CBCA1 21.0 1200 - 1600 1400 40.5 31.9 14.00 11.25 40.5 26.0 8.20 7.30 3.32 2.54
RHP14L42B24S CM48DBCA1 24.5 1200 - 1600 1400 40.5 31.9 14.00 11.25 40.5 26.0 8.20 7.30 3.32 2.54
RHP14L48B23S CF/CM/CU60C 21.0 1400 - 1800 1600 47.0 33.0 14.00 12.00 47.5 35.2 8.20 — 4.04 2.96
RHP14L48B23S CF/CM/CU60D 24.5 1400 - 1800 1600 47.0 33.0 14.00 12.00 47.5 35.2 8.20 — 4.04 2.96
For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.
1. Systems matched with furnaces or air handlers not equipped with blower-off delays may require 60 second time delay.
SYSTEM CAPACITY - Upflow, Downflow and Horizontal Furnaces and Coils (Coil Only Ratings) (Continued)
UNIT MODEL COIL CFM RANGE
(MIN.-MAX.)
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
12 Johnson Controls Ducted Systems
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD
RHP14L18B23S RGF1L040AE12MP12 14.5 CF/CM/CU18A 650 18.0 14.2 15.25 13.00 18.0 11.9 9.00 7.45 3.86 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 CF/CM/CU18B 675 18.0 14.4 15.25 13.00 18.0 12.0 9.00 7.40 3.92 2.60
RHP14L18B23S RGF1L040AE12MP12 14.5 CF/CM/CU24A 650 18.0 14.7 15.50 13.00 17.6 11.6 9.00 7.70 3.62 2.52
RHP14L18B23S RGF1L040AE12MP12 14.5 CF/CM/CU24B 700 18.0 15.3 15.75 13.00 17.8 11.9 9.00 7.65 3.72 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 CF18ABAA1 650 18.0 14.2 15.25 13.00 18.0 11.9 9.00 7.45 3.86 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 CF18BBAA1 675 18.0 14.4 15.25 13.00 18.0 12.0 9.00 7.40 3.92 2.60
RHP14L18B23S RGF1L040AE12MP12 14.5 CF24ABAA1 650 18.0 14.7 15.50 13.00 17.6 11.6 9.00 7.70 3.62 2.52
RHP14L18B23S RGF1L040AE12MP12 14.5 CF24BBAA1 700 18.0 15.3 15.75 13.00 17.8 11.9 9.00 7.65 3.72 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 CM18ABAA1 650 18.0 14.2 15.25 13.00 18.0 11.9 9.00 7.45 3.86 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 CM24ABAA1 650 18.0 14.7 15.50 13.00 17.6 11.6 9.00 7.70 3.62 2.52
RHP14L18B23S RGF1L040AE12MP12 14.5 CM24BBAA1 700 18.0 15.3 15.75 13.00 17.8 11.9 9.00 7.65 3.72 2.56
RHP14L18B23S RGF1L040AE12MP12 14.5 XAF/XAUA24B 725 18.0 15.0 14.50 12.00 17.5 10.4 8.20 6.50 3.56 2.20
RHP14L18B23S RGF1L040AE12MP12 14.5 XAHA24B 725 18.0 14.9 14.50 12.00 17.8 10.5 8.20 6.25 3.66 2.22
RHP14L18B23S RGF1L040AE12MP12 17.5 XAHB24B 650 18.0 14.3 14.50 12.00 17.5 10.4 8.20 6.55 3.56 2.18
RHP14L18B23S RGF1L060AE12MP12 14.5 CF/CM/CU18A 725 18.0 14.8 15.00 13.00 18.0 12.3 9.00 7.35 4.00 2.62
RHP14L18B23S RGF1L060AE12MP12 14.5 CF/CM/CU24A 725 18.0 15.4 15.50 13.00 17.9 12.1 9.00 7.65 3.74 2.56
RHP14L18B23S RGF1L060AE12MP12 14.5 CF18ABAA1 725 18.0 14.8 15.00 13.00 18.0 12.3 9.00 7.35 4.00 2.62
RHP14L18B23S RGF1L060AE12MP12 14.5 CF24ABAA1 725 18.0 15.4 15.50 13.00 17.9 12.1 9.00 7.65 3.74 2.56
RHP14L18B23S RGF1L060AE12MP12 14.5 CM18ABAA1 725 18.0 14.8 15.00 13.00 18.0 12.3 9.00 7.35 4.00 2.62
RHP14L18B23S RGF1L060AE12MP12 14.5 CM24ABAA1 725 18.0 15.4 15.50 13.00 17.9 12.1 9.00 7.65 3.74 2.56
RHP14L18B23S RGF1L060AE12MP12 14.5 XAF/XAUA24B 725 18.0 15.0 14.50 12.00 17.5 10.4 8.20 6.50 3.54 2.20
RHP14L18B23S RGF1L060AE12MP12 14.5 XAHA24B 725 18.0 14.9 14.50 12.00 17.8 10.5 8.20 6.25 3.64 2.20
RHP14L18B23S RGF1L080BE12MP12 17.5 CF/CM/CU18B 725 18.0 14.8 15.25 13.00 18.0 12.2 9.00 7.40 4.02 2.64
RHP14L18B23S RGF1L080BE12MP12 17.5 CF/CM/CU24B 725 18.0 15.4 15.50 13.00 17.9 12.0 9.00 7.65 3.76 2.58
RHP14L18B23S RGF1L080BE12MP12 17.5 CF18BBAA1 725 18.0 14.8 15.25 13.00 18.0 12.2 9.00 7.40 4.02 2.64
RHP14L18B23S RGF1L080BE12MP12 17.5 CF24BBAA1 725 18.0 15.4 15.50 13.00 17.9 12.0 9.00 7.65 3.76 2.58
RHP14L18B23S RGF1L080BE12MP12 17.5 CM24BBAA1 725 18.0 15.4 15.50 13.00 17.9 12.0 9.00 7.65 3.76 2.58
RHP14L18B23S RGF1L080BE12MP12 17.5 XAFB24B 725 18.0 15.1 14.50 12.00 17.5 10.4 8.20 6.40 3.56 2.20
RHP14L18B23S RGF1L080BE12MP12 17.5 XAHB24B 700 18.0 14.8 14.50 12.00 17.7 10.5 8.20 6.30 3.62 2.20
RHP14L18B23S RGF1L100BE12MP12 17.5 CF/CM/CU18B 700 18.0 14.7 15.25 13.00 18.0 12.1 9.00 7.40 3.98 2.62
RHP14L18B23S RGF1L100BE12MP12 17.5 CF/CM/CU24B 725 18.0 15.4 15.75 13.00 17.9 12.0 9.00 7.65 3.78 2.58
RHP14L18B23S RGF1L100BE12MP12 17.5 CF/CM24C 725 18.0 15.4 15.75 13.00 17.8 12.0 9.00 7.65 3.78 2.58
RHP14L18B23S RGF1L100BE12MP12 17.5 CF18BBAA1 700 18.0 14.7 15.25 13.00 18.0 12.1 9.00 7.40 3.98 2.62
RHP14L18B23S RGF1L100BE12MP12 17.5 CF24BBAA1 725 18.0 15.4 15.75 13.00 17.9 12.0 9.00 7.65 3.78 2.58
RHP14L18B23S RGF1L100BE12MP12 17.5 CM24BBAA1 725 18.0 15.4 15.75 13.00 17.9 12.0 9.00 7.65 3.78 2.58
RHP14L18B23S RGF1L100BE12MP12 17.5 XAFB24B 700 18.0 14.9 14.50 12.00 17.4 10.4 8.20 6.55 3.54 2.20
RHP14L18B23S RGF1L100BE12MP12 17.5 XAHB24B 700 18.0 14.8 14.50 12.00 17.7 10.5 8.20 6.35 3.64 2.20

5612272-UTG-H-1221
Johnson Controls Ducted Systems 13
RHP14L18B23S RGF2L080BE12MP11 17.5 CF/CM/CU18B 675 18.0 14.6 15.75 13.00 18.0 11.6 9.00 7.50 3.84 2.56
RHP14L18B23S RGF2L080BE12MP11 17.5 CF/CM/CU24B 675 18.0 14.6 15.50 13.00 18.0 11.5 9.00 7.40 3.86 2.56
RHP14L18B23S RGF2L080BE12MP11 17.5 CF/CM/CU24C 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.45 3.86 2.58
RHP14L18B23S RGF2L080BE12MP11 17.5 CF/CM24C 675 18.0 14.6 15.75 13.00 18.0 11.5 9.00 7.45 3.86 2.58
RHP14L18B23S RGF2L080BE12MP11 17.5 CF18BBAA1 675 18.0 14.6 15.75 13.00 18.0 11.6 9.00 7.50 3.84 2.56
RHP14L18B23S RGF2L080BE12MP11 17.5 CF24BBAA1 675 18.0 14.6 15.50 13.00 18.0 11.5 9.00 7.40 3.86 2.56
RHP14L18B23S RGF2L080BE12MP11 17.5 CM24BBAA1 600 18.0 13.4 14.50 12.25 17.5 11.8 8.50 — 3.70 2.50
RHP14L18B23S RGF2L080BE12MP11 17.5 XAHB24B 650 18.0 14.3 14.50 12.00 17.5 10.4 8.20 6.45 3.56 2.18
RHP14L18B23S RGF2L100CE16MP11 21.0 CF/CM24C 600 17.9 13.4 14.25 12.25 17.5 11.9 8.50 — 3.68 2.48
RHP14L18B23S RGF2L100CE16MP11 21.0 CF/CM24C 600 17.9 13.4 14.25 12.25 17.5 11.9 8.50 — 3.68 2.48
RHP14L18B23S RGF19040AE10MP13 14.5 CF/CM/CU18A 600 18.0 13.5 14.75 12.75 18.0 11.7 9.00 7.55 3.70 2.48
RHP14L18B23S RGF19040AE10MP13 14.5 CF/CM/CU18B 625 18.0 13.8 14.75 12.75 18.0 11.8 9.00 7.50 3.76 2.52
RHP14L18B23S RGF19040AE10MP13 14.5 CF/CM/CU24A 600 18.0 14.1 15.00 13.00 17.6 11.5 8.50 7.30 3.46 2.44
RHP14L18B23S RGF19040AE10MP13 14.5 CF/CM/CU24B 625 18.0 14.4 15.25 13.00 17.6 11.6 8.75 7.50 3.52 2.46
RHP14L18B23S RGF19040AE10MP13 14.5 CF18ABAA1 600 18.0 13.5 14.75 12.75 18.0 11.7 9.00 7.55 3.70 2.48
RHP14L18B23S RGF19040AE10MP13 14.5 CF18BBAA1 625 18.0 13.8 14.75 12.75 18.0 11.8 9.00 7.50 3.76 2.52
RHP14L18B23S RGF19040AE10MP13 14.5 CF24ABAA1 600 18.0 14.1 15.00 13.00 17.6 11.5 8.50 7.30 3.46 2.44
RHP14L18B23S RGF19040AE10MP13 14.5 CF24BBAA1 625 18.0 14.4 15.25 13.00 17.6 11.6 8.75 7.50 3.52 2.46
RHP14L18B23S RGF19040AE10MP13 14.5 CM18ABAA1 600 18.0 13.5 14.75 12.75 18.0 11.7 9.00 7.55 3.70 2.48
RHP14L18B23S RGF19040AE10MP13 14.5 CM24ABAA1 600 18.0 14.1 15.00 13.00 17.6 11.5 8.50 7.30 3.46 2.44
RHP14L18B23S RGF19040AE10MP13 14.5 CM24BBAA1 625 18.0 14.4 15.25 13.00 17.6 11.6 8.75 7.50 3.52 2.46
RHP14L18B23S RGF19040AE10MP13 17.5 XAHB24B 675 18.0 14.4 14.50 12.00 17.7 10.6 8.20 6.50 3.52 2.16
RHP14L18B23S RGF19060AE10MP13 14.5 CF/CM/CU18A 675 18.0 14.3 14.75 12.75 18.0 12.1 9.00 7.45 3.86 2.56
RHP14L18B23S RGF19060AE10MP13 14.5 CF/CM/CU18B 700 18.0 14.6 15.00 12.75 18.0 12.2 9.00 7.40 3.92 2.60
RHP14L18B23S RGF19060AE10MP13 14.5 CF/CM/CU24A 675 18.0 14.9 15.25 13.00 17.8 11.9 9.00 7.70 3.60 2.50
RHP14L18B23S RGF19060AE10MP13 14.5 CF/CM/CU24B 700 18.0 15.2 15.25 13.00 17.9 12.0 9.00 7.70 3.68 2.54
RHP14L18B23S RGF19060AE10MP13 14.5 CF18ABAA1 675 18.0 14.3 14.75 12.75 18.0 12.1 9.00 7.45 3.86 2.56
RHP14L18B23S RGF19060AE10MP13 14.5 CF18BBAA1 700 18.0 14.6 15.00 12.75 18.0 12.2 9.00 7.40 3.92 2.60
RHP14L18B23S RGF19060AE10MP13 14.5 CF24ABAA1 675 18.0 14.9 15.25 13.00 17.8 11.9 9.00 7.70 3.60 2.50
RHP14L18B23S RGF19060AE10MP13 14.5 CF24BBAA1 700 18.0 15.2 15.25 13.00 17.9 12.0 9.00 7.70 3.68 2.54
RHP14L18B23S RGF19060AE10MP13 14.5 CM18ABAA1 675 18.0 14.3 14.75 12.75 18.0 12.1 9.00 7.45 3.86 2.56
RHP14L18B23S RGF19060AE10MP13 14.5 CM24ABAA1 675 18.0 14.9 15.25 13.00 17.8 11.9 9.00 7.70 3.60 2.50
RHP14L18B23S RGF19060AE10MP13 14.5 CM24BBAA1 700 18.0 15.2 15.25 13.00 17.9 12.0 9.00 7.70 3.68 2.54
RHP14L18B23S RGF19060AE10MP13 17.5 XAHB24B 675 18.0 14.5 14.50 12.00 17.7 10.5 8.20 6.55 3.56 2.18
RHP14L18B23S RGF19060BE12MP13 17.5 XAFB24B 725 18.0 15.0 14.50 12.00 17.6 10.5 8.20 6.55 3.52 2.18
RHP14L18B23S RGF19060BE12MP13 17.5 XAHB24B 725 18.0 14.9 14.50 12.00 17.8 10.6 8.20 6.30 3.62 2.20
RHP14L18B23S RGF29040AE12MP11 14.5 CF/CM/CU18A 500 18.0 12.9 15.00 12.75 18.0 11.7 8.75 7.45 3.50 2.46
RHP14L18B23S RGF29040AE12MP11 14.5 CF/CM/CU18B 525 18.0 13.6 15.25 13.00 18.1 11.7 8.75 7.45 3.56 2.50
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
14 Johnson Controls Ducted Systems
RHP14L18B23S RGF29040AE12MP11 14.5 CF/CM/CU24A 500 18.0 12.8 14.75 12.25 18.0 11.7 8.75 7.40 3.52 2.46
RHP14L18B23S RGF29040AE12MP11 14.5 CF/CM/CU24B 525 18.0 13.1 15.00 12.50 18.0 11.7 8.75 7.35 3.60 2.50
RHP14L18B23S RGF29040AE12MP11 14.5 CF18ABAA1 500 18.0 12.9 15.00 12.75 18.0 11.7 8.75 7.45 3.50 2.46
RHP14L18B23S RGF29040AE12MP11 14.5 CF18BBAA1 525 18.0 13.6 15.25 13.00 18.1 11.7 8.75 7.45 3.56 2.50
RHP14L18B23S RGF29040AE12MP11 14.5 CF24ABAA1 500 18.0 12.8 14.75 12.25 18.0 11.7 8.75 7.40 3.52 2.46
RHP14L18B23S RGF29040AE12MP11 14.5 CF24BBAA1 525 18.0 13.1 15.00 12.50 18.0 11.7 8.75 7.35 3.60 2.50
RHP14L18B23S RGF29040AE12MP11 14.5 CM18ABAA1 600 17.9 13.5 14.50 12.50 17.5 11.9 8.50 — 3.68 2.48
RHP14L18B23S RGF29040AE12MP11 14.5 CM24ABAA1 575 18.0 13.5 14.50 12.50 17.5 11.8 8.50 — 3.72 2.52
RHP14L18B23S RGF29040AE12MP11 14.5 CM24BBAA1 525 18.0 13.1 15.00 12.50 18.0 11.7 8.75 7.35 3.60 2.50
RHP14L24B23S RGF1L040AE12MP12 14.5 CF/CM/CU24A 725 24.0 16.9 15.00 13.00 24.0 15.6 9.00 7.40 3.70 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CF/CM/CU24B 700 24.0 16.8 15.25 13.00 24.0 15.4 9.00 7.20 3.68 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CF/CM/CU30A 825 24.0 19.7 15.75 13.00 24.0 14.8 9.00 7.25 3.80 2.54
RHP14L24B23S RGF1L040AE12MP12 14.5 CF/CM/CU30B 875 24.0 20.3 15.75 13.00 24.0 14.9 9.00 7.15 3.92 2.58
RHP14L24B23S RGF1L040AE12MP12 14.5 CF24ABAA1 725 24.0 16.9 15.00 13.00 24.0 15.6 9.00 7.40 3.70 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CF24BBAA1 700 24.0 16.8 15.25 13.00 24.0 15.4 9.00 7.20 3.68 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CF30ABAA1 825 24.0 19.7 15.75 13.00 24.0 14.8 9.00 7.25 3.80 2.54
RHP14L24B23S RGF1L040AE12MP12 14.5 CF30BBAA1 875 24.0 20.3 15.75 13.00 24.0 14.9 9.00 7.15 3.92 2.58
RHP14L24B23S RGF1L040AE12MP12 14.5 CM24ABAA1 725 24.0 16.9 15.00 13.00 24.0 15.6 9.00 7.40 3.70 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CM24BBAA1 700 24.0 16.8 15.25 13.00 24.0 15.4 9.00 7.20 3.68 2.52
RHP14L24B23S RGF1L040AE12MP12 14.5 CM30BBAA1 875 24.0 20.3 15.75 13.00 24.0 14.9 9.00 7.15 3.92 2.58
RHP14L24B23S RGF1L040AE12MP12 14.5 XAF/XAUA24B 825 24.0 17.7 14.50 12.00 23.6 14.7 8.20 6.35 3.56 2.34
RHP14L24B23S RGF1L040AE12MP12 17.5 XAFB24B 875 24.0 18.2 14.50 12.00 23.8 14.7 8.20 6.45 3.66 2.38
RHP14L24B23S RGF1L040AE12MP12 14.5 XAHA24B 825 24.0 18.2 14.50 12.00 23.2 15.3 8.20 6.60 3.42 2.36
RHP14L24B23S RGF1L040AE12MP12 17.5 XAHB24B 850 24.0 18.6 14.50 12.00 23.2 15.3 8.20 6.75 3.46 2.38
RHP14L24B23S RGF1L060AE12MP12 14.5 CF/CM/CU24A 775 24.0 17.5 15.00 12.50 24.0 15.8 9.00 7.20 3.78 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF/CM/CU24B 750 24.0 17.3 15.25 13.00 24.0 15.6 9.00 7.15 3.76 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF/CM/CU30A 825 24.0 19.7 15.75 13.00 24.0 14.8 9.00 7.25 3.80 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF/CM/CU30B 825 24.0 19.7 15.75 13.00 24.0 14.7 9.00 7.10 3.86 2.56
RHP14L24B23S RGF1L060AE12MP12 14.5 CF24ABAA1 775 24.0 17.5 15.00 12.50 24.0 15.8 9.00 7.20 3.78 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF24BBAA1 750 24.0 17.3 15.25 13.00 24.0 15.6 9.00 7.15 3.76 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF30ABAA1 825 24.0 19.7 15.75 13.00 24.0 14.8 9.00 7.25 3.80 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CF30BBAA1 825 24.0 19.7 15.75 13.00 24.0 14.7 9.00 7.10 3.86 2.56
RHP14L24B23S RGF1L060AE12MP12 14.5 CM24ABAA1 775 24.0 17.5 15.00 12.50 24.0 15.8 9.00 7.20 3.78 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CM24BBAA1 750 24.0 17.3 15.25 13.00 24.0 15.6 9.00 7.15 3.76 2.54
RHP14L24B23S RGF1L060AE12MP12 14.5 CM30BBAA1 825 24.0 19.7 15.75 13.00 24.0 14.7 9.00 7.10 3.86 2.56
RHP14L24B23S RGF1L060AE12MP12 14.5 XAF/XAUA24B 850 24.0 17.8 14.50 12.00 23.8 14.7 8.20 6.60 3.60 2.36
RHP14L24B23S RGF1L060AE12MP12 17.5 XAFB24B 800 24.0 17.6 14.50 12.00 23.6 14.6 8.20 6.35 3.56 2.34
RHP14L24B23S RGF1L060AE12MP12 14.5 XAHA24B 825 24.0 18.2 14.50 12.00 23.2 15.3 8.20 6.60 3.42 2.36
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
Johnson Controls Ducted Systems 15
RHP14L24B23S RGF1L060AE12MP12 17.5 XAHB24B 875 24.0 18.7 14.50 12.00 23.2 15.3 8.20 6.60 3.50 2.40
RHP14L24B23S RGF1L080BE12MP12 17.5 CF/CM/CU24B 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 7.30 3.72 2.52
RHP14L24B23S RGF1L080BE12MP12 17.5 CF/CM/CU30B 900 24.0 20.7 15.75 13.00 24.0 15.0 9.00 7.15 3.78 2.46
RHP14L24B23S RGF1L080BE12MP12 17.5 CF/CM24C 925 24.0 19.1 15.00 13.00 24.0 16.2 9.00 7.00 4.06 2.68
RHP14L24B23S RGF1L080BE12MP12 17.5 CF/CM30C 925 24.0 20.9 15.75 13.00 24.0 15.0 9.00 7.20 3.84 2.48
RHP14L24B23S RGF1L080BE12MP12 17.5 CF24BBAA1 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 7.30 3.72 2.52
RHP14L24B23S RGF1L080BE12MP12 17.5 CF30BBAA1 900 24.0 20.7 15.75 13.00 24.0 15.0 9.00 7.15 3.78 2.46
RHP14L24B23S RGF1L080BE12MP12 17.5 CM24BBAA1 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 7.30 3.72 2.52
RHP14L24B23S RGF1L080BE12MP12 17.5 CM30BBAA1 900 24.0 20.7 15.75 13.00 24.0 15.0 9.00 7.15 3.78 2.46
RHP14L24B23S RGF1L080BE12MP12 17.5 XAFB24B 900 24.0 18.5 14.50 12.00 23.8 14.7 8.20 6.35 3.68 2.38
RHP14L24B23S RGF1L080BE12MP12 17.5 XAHB24B 875 24.0 18.7 14.50 12.00 23.2 15.4 8.20 6.70 3.48 2.38
RHP14L24B23S RGF1L080CE16MP12 21.0 CF/CM24C 825 24.0 18.2 15.50 13.00 24.0 15.8 9.00 6.20 4.12 2.78
RHP14L24B23S RGF1L080CE16MP12 21.0 CF/CM30C 825 24.0 19.9 15.75 13.00 24.0 14.6 9.00 7.05 3.90 2.58
RHP14L24B23S RGF1L100BE12MP12 17.5 CF/CM/CU24B 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 6.70 3.92 2.70
RHP14L24B23S RGF1L100BE12MP12 17.5 CF/CM/CU30B 925 24.0 20.9 15.75 13.00 24.0 15.0 9.00 7.20 3.84 2.48
RHP14L24B23S RGF1L100BE12MP12 17.5 CF/CM24C 850 24.0 18.4 15.25 13.00 24.0 15.9 9.00 7.20 3.94 2.64
RHP14L24B23S RGF1L100BE12MP12 17.5 CF/CM30C 925 24.0 20.9 15.75 13.00 24.0 15.0 9.00 7.20 3.84 2.48
RHP14L24B23S RGF1L100BE12MP12 17.5 CF24BBAA1 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 6.70 3.92 2.70
RHP14L24B23S RGF1L100BE12MP12 17.5 CF30BBAA1 925 24.0 20.9 15.75 13.00 24.0 15.0 9.00 7.20 3.84 2.48
RHP14L24B23S RGF1L100BE12MP12 17.5 CM24BBAA1 725 24.0 17.1 15.25 13.00 24.0 15.5 9.00 6.70 3.92 2.70
RHP14L24B23S RGF1L100BE12MP12 17.5 CM30BBAA1 925 24.0 20.9 15.75 13.00 24.0 15.0 9.00 7.20 3.84 2.48
RHP14L24B23S RGF1L100BE12MP12 17.5 XAFB24B 825 24.0 17.7 14.50 12.00 23.6 14.6 8.20 6.60 3.60 2.36
RHP14L24B23S RGF1L100BE12MP12 17.5 XAHB24B 825 24.0 18.2 14.50 12.00 23.0 15.2 8.20 6.55 3.44 2.38
RHP14L24B23S RGF1L100CE16MP12 21.0 CF/CM24C 800 24.0 17.9 15.50 13.00 24.0 15.7 9.00 6.30 4.08 2.76
RHP14L24B23S RGF1L100CE16MP12 21.0 CF/CM30C 950 24.0 21.3 15.75 13.00 24.0 15.0 9.00 6.95 4.10 2.68
RHP14L24B23S RGF1L120CE16MP12 21.0 CF/CM24C 800 24.0 17.9 15.50 13.00 24.0 15.7 9.00 6.30 4.08 2.76
RHP14L24B23S RGF1L120CE16MP12 21.0 CF/CM30C 800 24.0 19.5 15.75 13.00 24.0 14.6 9.00 7.20 3.84 2.56
RHP14L24B23S RGF2L080BE12MP11 17.5 CF/CM/CU24B 675 24.0 17.7 15.50 12.75 24.0 14.9 8.50 7.15 3.58 2.40
RHP14L24B23S RGF2L080BE12MP11 17.5 CF/CM/CU24C 675 24.0 17.6 15.50 13.00 24.0 14.9 8.50 7.20 3.58 2.40
RHP14L24B23S RGF2L080BE12MP11 17.5 CF/CM/CU30B 675 24.0 16.9 15.75 13.00 24.0 15.0 9.25 7.85 3.84 2.68
RHP14L24B23S RGF2L080BE12MP11 17.5 CF/CM/CU30C 675 24.0 16.9 15.75 13.00 24.0 15.0 9.25 7.80 3.84 2.68
RHP14L24B23S RGF2L080BE12MP11 17.5 CF24BBAA1 675 24.0 17.7 15.50 12.75 24.0 14.9 8.50 7.15 3.58 2.40
RHP14L24B23S RGF2L080BE12MP11 17.5 CF30BBAA1 725 24.0 17.9 16.00 13.00 23.6 15.3 8.50 — 3.88 2.64
RHP14L24B23S RGF2L080BE12MP11 17.5 CM24BBAA1 725 23.6 16.9 15.50 12.75 23.2 14.9 8.50 — 3.62 2.46
RHP14L24B23S RGF2L080BE12MP11 17.5 CM30BBAA1 725 24.0 17.9 16.00 13.00 23.6 15.3 8.50 — 3.88 2.64
RHP14L24B23S RGF2L080BE12MP11 17.5 XAFB24B 825 24.0 17.7 14.50 12.00 23.6 14.6 8.20 6.60 3.60 2.36
RHP14L24B23S RGF2L080BE12MP11 17.5 XAHB24B 825 24.0 18.2 14.50 12.00 23.0 15.2 8.20 6.55 3.44 2.38
RHP14L24B23S RGF2L100CE16MP11 21.0 CF/CM/CU30D 800 24.0 18.8 16.00 13.00 23.8 15.3 8.50 — 4.00 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
16 Johnson Controls Ducted Systems
RHP14L24B23S RGF2L100CE16MP11 21.0 CF/CM24C 800 24.0 17.6 15.75 13.00 23.4 14.9 8.50 — 3.74 2.46
RHP14L24B23S RGF2L100CE16MP11 21.0 CF/CM30C 800 24.0 18.8 16.00 13.00 23.8 15.3 8.50 — 4.00 2.68
RHP14L24B23S RGF2L100CE20MP11 21.0 CF/CM/CU30D 800 24.0 18.4 15.25 12.50 24.0 15.7 8.50 — 3.80 2.56
RHP14L24B23S RGF2L100CE20MP11 21.0 CF/CM30C 800 24.0 18.4 15.25 12.50 24.0 15.7 8.50 — 3.80 2.56
RHP14L24B23S RGF19026AE08MP13 14.5 XAF/XAUA24B 850 23.8 17.6 14.00 11.50 24.0 15.0 8.20 6.55 3.48 2.28
RHP14L24B23S RGF19026AE08MP13 17.5 XAFB24B 875 23.8 17.8 14.00 11.50 24.0 15.0 8.20 6.40 3.52 2.30
RHP14L24B23S RGF19026AE08MP13 14.5 XAHA24B 825 23.8 17.8 14.00 11.50 23.4 15.6 8.20 6.85 3.30 2.28
RHP14L24B23S RGF19026AE08MP13 17.5 XAHB24B 850 24.0 18.2 14.50 12.00 23.4 15.6 8.20 6.70 3.34 2.30
RHP14L24B23S RGF19040AE10MP13 14.5 CF/CM/CU24A 650 23.8 16.2 14.50 12.25 24.0 15.5 9.00 7.30 3.70 2.58
RHP14L24B23S RGF19040AE10MP13 14.5 CF/CM/CU24B 825 24.0 17.8 14.25 12.20 24.0 16.1 9.00 7.10 3.78 2.54
RHP14L24B23S RGF19040AE10MP13 14.5 CF/CM/CU30A 775 24.0 18.9 15.00 13.00 24.0 14.9 8.50 6.80 3.48 2.30
RHP14L24B23S RGF19040AE10MP13 14.5 CF/CM/CU30B 875 24.0 20.1 15.00 13.00 24.0 15.2 9.00 7.25 3.80 2.52
RHP14L24B23S RGF19040AE10MP13 14.5 CF24ABAA1 650 23.8 16.2 14.50 12.25 24.0 15.5 9.00 7.30 3.70 2.58
RHP14L24B23S RGF19040AE10MP13 14.5 CF24BBAA1 825 24.0 17.8 14.25 12.20 24.0 16.1 9.00 7.10 3.78 2.54
RHP14L24B23S RGF19040AE10MP13 14.5 CF30ABAA1 775 24.0 18.9 15.00 13.00 24.0 14.9 8.50 6.80 3.48 2.30
RHP14L24B23S RGF19040AE10MP13 14.5 CF30BBAA1 875 24.0 20.1 15.00 13.00 24.0 15.2 9.00 7.25 3.80 2.52
RHP14L24B23S RGF19040AE10MP13 14.5 CM24ABAA1 650 23.8 16.2 14.50 12.25 24.0 15.5 9.00 7.30 3.70 2.58
RHP14L24B23S RGF19040AE10MP13 14.5 CM24BBAA1 825 24.0 17.8 14.25 12.20 24.0 16.1 9.00 7.10 3.78 2.54
RHP14L24B23S RGF19040AE10MP13 14.5 CM30BBAA1 875 24.0 20.1 15.00 13.00 24.0 15.2 9.00 7.25 3.80 2.52
RHP14L24B23S RGF19040AE10MP13 14.5 XAF/XAUA24B 850 23.8 17.6 14.00 11.50 24.0 15.0 8.20 6.50 3.50 2.30
RHP14L24B23S RGF19040AE10MP13 17.5 XAFB24B 875 24.0 18.0 14.50 12.00 24.0 15.0 8.20 6.45 3.54 2.32
RHP14L24B23S RGF19040AE10MP13 14.5 XAHA24B 825 24.0 18.0 14.50 12.00 23.4 15.6 8.20 6.80 3.32 2.30
RHP14L24B23S RGF19040AE10MP13 17.5 XAHB24B 850 24.0 18.2 14.50 12.00 23.4 15.6 8.20 6.75 3.36 2.32
RHP14L24B23S RGF19060AE10MP13 14.5 CF/CM/CU24A 800 24.0 17.7 14.50 12.25 24.0 16.0 9.00 7.15 3.94 2.68
RHP14L24B23S RGF19060AE10MP13 14.5 CF/CM/CU24B 700 24.0 16.8 15.00 12.50 24.0 15.5 9.00 7.00 3.84 2.64
RHP14L24B23S RGF19060AE10MP13 14.5 CF/CM/CU30A 825 24.0 19.5 15.00 13.00 24.0 15.0 8.50 6.95 3.56 2.36
RHP14L24B23S RGF19060AE10MP13 14.5 CF/CM/CU30B 850 24.0 19.9 15.75 13.00 24.0 14.9 9.00 7.20 3.84 2.54
RHP14L24B23S RGF19060AE10MP13 14.5 CF24ABAA1 800 24.0 17.7 14.50 12.25 24.0 16.0 9.00 7.15 3.94 2.68
RHP14L24B23S RGF19060AE10MP13 14.5 CF24BBAA1 700 24.0 16.8 15.00 12.50 24.0 15.5 9.00 7.00 3.84 2.64
RHP14L24B23S RGF19060AE10MP13 14.5 CF30ABAA1 825 24.0 19.5 15.00 13.00 24.0 15.0 8.50 6.95 3.56 2.36
RHP14L24B23S RGF19060AE10MP13 14.5 CF30BBAA1 850 24.0 19.9 15.75 13.00 24.0 14.9 9.00 7.20 3.84 2.54
RHP14L24B23S RGF19060AE10MP13 14.5 CM24ABAA1 800 24.0 17.7 14.50 12.25 24.0 16.0 9.00 7.15 3.94 2.68
RHP14L24B23S RGF19060AE10MP13 14.5 CM24BBAA1 700 24.0 16.8 15.00 12.50 24.0 15.5 9.00 7.00 3.84 2.64
RHP14L24B23S RGF19060AE10MP13 14.5 CM30BBAA1 850 24.0 19.9 15.75 13.00 24.0 14.9 9.00 7.20 3.84 2.54
RHP14L24B23S RGF19060AE10MP13 14.5 XAF/XAUA24B 850 24.0 17.8 14.50 12.00 23.8 14.9 8.20 6.45 3.54 2.32
RHP14L24B23S RGF19060AE10MP13 17.5 XAFB24B 875 24.0 18.0 14.50 12.00 24.0 14.8 8.50 6.90 3.60 2.34
RHP14L24B23S RGF19060AE10MP13 14.5 XAHA24B 850 24.0 18.4 14.50 12.00 23.4 15.5 8.20 6.60 3.40 2.34
RHP14L24B23S RGF19060AE10MP13 17.5 XAHB24B 875 24.0 18.7 14.50 12.00 23.4 15.5 8.20 6.75 3.44 2.36
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
Johnson Controls Ducted Systems 17
RHP14L24B23S RGF19060BE12MP13 17.5 CF/CM/CU24B 750 24.0 17.3 15.00 12.50 24.0 15.7 9.00 6.70 3.92 2.68
RHP14L24B23S RGF19060BE12MP13 17.5 CF/CM/CU30B 750 24.0 18.9 15.75 13.00 23.8 14.5 9.00 7.25 3.70 2.48
RHP14L24B23S RGF19060BE12MP13 17.5 CF/CM24C 750 24.0 17.3 15.00 12.50 24.0 15.7 9.00 6.70 3.92 2.68
RHP14L24B23S RGF19060BE12MP13 17.5 CF/CM30C 750 24.0 18.9 15.75 13.00 23.8 14.5 9.00 7.25 3.70 2.50
RHP14L24B23S RGF19060BE12MP13 17.5 CF24BBAA1 750 24.0 17.3 15.00 12.50 24.0 15.7 9.00 6.70 3.92 2.68
RHP14L24B23S RGF19060BE12MP13 17.5 CF30BBAA1 750 24.0 18.9 15.75 13.00 23.8 14.5 9.00 7.25 3.70 2.48
RHP14L24B23S RGF19060BE12MP13 17.5 CM24BBAA1 750 24.0 17.3 15.00 12.50 24.0 15.7 9.00 6.70 3.92 2.68
RHP14L24B23S RGF19060BE12MP13 17.5 CM30BBAA1 750 24.0 18.9 15.75 13.00 23.8 14.5 9.00 7.25 3.70 2.48
RHP14L24B23S RGF19060BE12MP13 17.5 XAFB24B 950 24.0 18.7 14.50 12.00 24.0 14.9 8.50 6.70 3.68 2.36
RHP14L24B23S RGF19060BE12MP13 17.5 XAHB24B 925 24.0 19.2 14.50 12.00 23.6 15.6 8.20 6.60 3.50 2.38
RHP14L24B23S RGF19080BE12MP13 17.5 CF/CM/CU24B 800 24.0 17.9 15.00 13.00 24.0 15.8 9.00 7.00 3.84 2.58
RHP14L24B23S RGF19080BE12MP13 17.5 CF/CM/CU30B 950 24.0 21.1 15.75 13.00 24.0 15.2 9.00 7.20 3.84 2.48
RHP14L24B23S RGF19080BE12MP13 17.5 CF/CM24C 800 24.0 17.9 15.00 13.00 24.0 15.8 9.00 7.00 3.84 2.58
RHP14L24B23S RGF19080BE12MP13 17.5 CF/CM30C 825 24.0 19.9 15.75 13.00 24.0 14.7 8.50 6.65 3.68 2.42
RHP14L24B23S RGF19080BE12MP13 17.5 CF24BBAA1 800 24.0 17.9 15.00 13.00 24.0 15.8 9.00 7.00 3.84 2.58
RHP14L24B23S RGF19080BE12MP13 17.5 CF30BBAA1 950 24.0 21.1 15.75 13.00 24.0 15.2 9.00 7.20 3.84 2.48
RHP14L24B23S RGF19080BE12MP13 17.5 CM24BBAA1 800 24.0 17.9 15.00 13.00 24.0 15.8 9.00 7.00 3.84 2.58
RHP14L24B23S RGF19080BE12MP13 17.5 CM30BBAA1 950 24.0 21.1 15.75 13.00 24.0 15.2 9.00 7.20 3.84 2.48
RHP14L24B23S RGF19080BE12MP13 17.5 XAFB24B 925 24.0 18.6 14.50 12.00 24.0 14.8 8.20 6.40 3.68 2.38
RHP14L24B23S RGF19080BE12MP13 17.5 XAHB24B 925 24.0 19.2 14.50 12.00 23.4 15.5 8.20 6.55 3.54 2.40
RHP14L24B23S RGF19080CE16MP13 21.0 CF/CM24C 900 24.0 19.0 15.25 13.00 24.0 16.1 9.00 6.90 4.22 2.82
RHP14L24B23S RGF19080CE16MP13 21.0 CF/CM30C 900 24.0 20.7 15.75 13.00 24.0 14.9 9.00 7.05 4.00 2.62
RHP14L24B23S RGF19100CE16MP13 21.0 CF/CM24C 950 24.0 19.5 15.25 13.00 24.0 16.2 9.00 6.90 4.32 2.88
RHP14L24B23S RGF19100CE16MP13 21.0 CF/CM30C 950 24.0 21.3 15.75 13.00 24.0 15.1 9.00 7.00 4.10 2.66
RHP14L24B23S RGF29040AE12MP11 14.5 CF/CM/CU24A 675 23.8 17.3 14.50 12.25 24.0 15.2 8.20 6.95 3.48 2.34
RHP14L24B23S RGF29040AE12MP11 14.5 CF/CM/CU24B 700 24.0 17.7 14.50 12.25 24.0 15.1 8.50 7.20 3.52 2.36
RHP14L24B23S RGF29040AE12MP11 14.5 CF/CM/CU30A 675 24.0 18.1 15.50 13.00 24.0 15.3 9.00 7.65 3.72 2.60
RHP14L24B23S RGF29040AE12MP11 14.5 CF/CM/CU30B 700 24.0 17.2 15.75 13.00 24.0 15.3 9.25 7.85 3.78 2.60
RHP14L24B23S RGF29040AE12MP11 14.5 CF24ABAA1 675 23.8 17.3 14.50 12.25 24.0 15.2 8.20 6.95 3.48 2.34
RHP14L24B23S RGF29040AE12MP11 14.5 CF24BBAA1 700 24.0 17.7 14.50 12.25 24.0 15.1 8.50 7.20 3.52 2.36
RHP14L24B23S RGF29040AE12MP11 14.5 CF30ABAA1 675 24.0 18.1 15.50 13.00 24.0 15.3 9.00 7.65 3.72 2.60
RHP14L24B23S RGF29040AE12MP11 14.5 XAF/XAUA24B 775 23.4 16.9 14.00 11.50 23.8 15.0 8.20 6.80 3.40 2.24
RHP14L24B23S RGF29040AE12MP11 17.5 XAFB24B 800 23.6 17.2 14.00 11.50 23.8 15.0 8.20 6.60 3.44 2.26
RHP14L24B23S RGF29040AE12MP11 17.5 XAHB24B 800 23.8 17.7 14.50 12.00 23.4 15.5 8.20 6.85 3.30 2.28
RHP14L30B23S RGF1L040AE12MP12 14.5 CF/CM/CU30A 800 29.2 20.4 15.50 13.00 29.4 19.2 9.00 7.60 3.70 2.66
RHP14L30B23S RGF1L040AE12MP12 14.5 CF/CM/CU30B 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L040AE12MP12 14.5 CF/CM/CU36B 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
18 Johnson Controls Ducted Systems
RHP14L30B23S RGF1L040AE12MP12 14.5 CF/CM36A 825 29.2 20.6 15.50 13.00 29.6 19.2 9.00 7.55 3.74 2.68
RHP14L30B23S RGF1L040AE12MP12 14.5 CF30BBBA1 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L040AE12MP12 14.5 CF42B 850 29.6 21.2 15.50 13.00 30.0 18.8 9.00 7.35 3.90 2.68
RHP14L30B23S RGF1L040AE12MP12 14.5 CM30ABBA1 800 29.2 20.4 15.50 13.00 29.4 19.2 9.00 7.60 3.70 2.66
RHP14L30B23S RGF1L040AE12MP12 14.5 CM30BBBA1 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L040AE12MP12 17.5 XAF/XAUB30C 1025 28.4 22.4 14.50 12.00 29.0 18.7 8.55 6.80 3.56 2.36
RHP14L30B23S RGF1L040AE12MP12 17.5 XAF/XAUB36D 850 28.4 20.6 15.00 12.50 28.4 18.3 9.00 7.20 3.60 2.50
RHP14L30B23S RGF1L040AE12MP12 14.5 XAFA30D 975 28.8 21.5 14.50 12.00 28.8 18.7 9.00 7.15 3.64 2.52
RHP14L30B23S RGF1L040AE12MP12 17.5 XAHB30C 1000 28.4 22.3 14.50 12.00 29.0 18.8 8.55 6.90 3.62 2.44
RHP14L30B23S RGF1L040AE12MP12 17.5 XAHB36D 825 28.2 20.5 14.50 12.00 27.8 18.1 8.55 6.75 3.52 2.48
RHP14L30B23S RGF1L060AE12MP12 14.5 CF/CM/CU30A 825 29.2 20.6 15.50 13.00 29.6 19.2 9.00 7.55 3.74 2.66
RHP14L30B23S RGF1L060AE12MP12 14.5 CF/CM/CU30B 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L060AE12MP12 14.5 CF/CM/CU36B 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L060AE12MP12 14.5 CF/CM36A 825 29.2 20.6 15.50 13.00 29.6 19.2 9.00 7.55 3.74 2.68
RHP14L30B23S RGF1L060AE12MP12 14.5 CF30BBBA1 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L060AE12MP12 14.5 CF42B 850 29.4 21.0 15.50 13.00 30.0 18.8 9.00 7.30 3.90 2.66
RHP14L30B23S RGF1L060AE12MP12 14.5 CM30ABBA1 825 29.2 20.6 15.50 13.00 29.6 19.2 9.00 7.55 3.74 2.66
RHP14L30B23S RGF1L060AE12MP12 14.5 CM30BBBA1 875 29.4 21.2 15.75 13.00 29.6 19.2 9.00 7.50 3.82 2.70
RHP14L30B23S RGF1L060AE12MP12 17.5 XAF/XAUB30C 1025 28.4 22.4 14.50 12.00 29.0 18.7 8.55 6.80 3.56 2.36
RHP14L30B23S RGF1L060AE12MP12 17.5 XAF/XAUB36D 850 28.4 20.6 15.00 12.50 28.4 18.3 9.00 7.20 3.60 2.48
RHP14L30B23S RGF1L060AE12MP12 14.5 XAFA30D 950 28.6 21.2 14.50 12.00 28.8 18.7 9.00 7.20 3.62 2.50
RHP14L30B23S RGF1L060AE12MP12 17.5 XAHB30C 1000 28.4 22.3 14.50 12.00 29.0 18.9 8.55 6.90 3.60 2.44
RHP14L30B23S RGF1L060AE12MP12 17.5 XAHB36D 825 28.2 20.5 14.50 12.00 27.8 18.1 8.55 6.75 3.50 2.48
RHP14L30B23S RGF1L080BE12MP12 17.5 CF/CM/CU30B 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.55 3.84 2.72
RHP14L30B23S RGF1L080BE12MP12 17.5 CF/CM/CU36B 875 29.4 21.2 15.50 13.00 29.6 19.3 9.00 7.55 3.80 2.70
RHP14L30B23S RGF1L080BE12MP12 17.5 CF/CM/CU36C 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L080BE12MP12 17.5 CF/CM/CU42C 900 29.6 21.6 15.50 13.00 30.0 18.8 9.00 7.30 3.96 2.70
RHP14L30B23S RGF1L080BE12MP12 17.5 CF/CM30C 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L080BE12MP12 17.5 CF30BBBA1 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.55 3.84 2.72
RHP14L30B23S RGF1L080BE12MP12 17.5 CF42B 875 29.6 21.4 15.25 13.00 30.0 18.8 9.00 7.35 3.92 2.68
RHP14L30B23S RGF1L080BE12MP12 17.5 CM30BBBA1 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.55 3.84 2.72
RHP14L30B23S RGF1L080BE12MP12 17.5 XAF/XAUB30C 1025 28.4 22.4 14.50 12.00 29.0 18.7 8.55 6.80 3.56 2.36
RHP14L30B23S RGF1L080BE12MP12 17.5 XAF/XAUB36D 875 28.4 20.7 14.50 12.50 28.4 18.4 9.00 7.25 3.62 2.50
RHP14L30B23S RGF1L080BE12MP12 21.0 XAFC30C 1025 28.4 22.4 14.50 12.00 29.0 18.7 8.55 6.80 3.56 2.36
RHP14L30B23S RGF1L080BE12MP12 17.5 XAHB30C 1000 28.4 22.3 14.50 12.00 29.0 18.9 8.55 6.85 3.60 2.44
RHP14L30B23S RGF1L080BE12MP12 17.5 XAHB36D 850 28.2 20.7 14.50 12.00 27.8 18.1 8.55 6.80 3.52 2.48
RHP14L30B23S RGF1L080CE16MP12 21.0 CF/CM/CU36C 950 29.6 22.0 15.75 13.00 29.8 19.3 9.00 7.45 3.92 2.76
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
Johnson Controls Ducted Systems 19
RHP14L30B23S RGF1L080CE16MP12 21.0 CF/CM/CU42C 950 29.8 22.2 15.75 13.00 30.0 18.8 9.00 7.25 4.04 2.74
RHP14L30B23S RGF1L080CE16MP12 21.0 CF/CM30C 950 29.6 22.0 15.75 13.00 29.8 19.3 9.00 7.45 3.92 2.76
RHP14L30B23S RGF1L080CE16MP12 21.0 XAFC30C 1075 29.0 23.1 14.50 12.00 29.0 18.6 8.55 6.60 3.64 2.40
RHP14L30B23S RGF1L080CE16MP12 21.0 XAFC36D 1050 29.2 22.2 15.00 12.50 28.8 18.7 9.00 7.25 3.76 2.58
RHP14L30B23S RGF1L080CE16MP12 21.0 XAHC36D 1025 29.2 23.0 14.50 12.50 28.4 18.4 9.00 7.20 3.70 2.54
RHP14L30B23S RGF1L080CE20MP12 21.0 XAFC36D 1200 30.0 23.6 15.00 12.50 29.0 19.1 9.00 7.20 3.90 2.66
RHP14L30B23S RGF1L080CE20MP12 21.0 XAHC36D 1175 29.8 24.6 14.50 12.50 28.8 18.6 9.00 7.10 3.84 2.58
RHP14L30B23S RGF1L100BE12MP12 17.5 CF/CM/CU30B 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L100BE12MP12 17.5 CF/CM/CU36B 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L100BE12MP12 17.5 CF/CM/CU36C 925 29.4 21.6 15.75 13.00 29.8 19.3 9.00 7.50 3.88 2.74
RHP14L30B23S RGF1L100BE12MP12 17.5 CF/CM/CU42C 925 29.6 21.8 15.50 13.00 30.0 18.9 9.00 7.30 4.00 2.70
RHP14L30B23S RGF1L100BE12MP12 17.5 CF/CM30C 925 29.4 21.6 15.75 13.00 29.8 19.3 9.00 7.50 3.88 2.74
RHP14L30B23S RGF1L100BE12MP12 17.5 CF30BBBA1 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L100BE12MP12 17.5 CF42B 875 29.6 21.4 15.50 13.00 30.0 18.8 9.00 7.35 3.92 2.68
RHP14L30B23S RGF1L100BE12MP12 17.5 CM30BBBA1 900 29.4 21.4 15.50 13.00 29.8 19.3 9.00 7.50 3.84 2.72
RHP14L30B23S RGF1L100BE12MP12 17.5 XAF/XAUB30C 1075 29.0 22.9 14.50 12.00 29.0 18.7 8.55 6.75 3.58 2.36
RHP14L30B23S RGF1L100BE12MP12 17.5 XAF/XAUB36D 875 28.4 20.7 15.00 12.50 28.4 18.4 9.00 7.25 3.62 2.50
RHP14L30B23S RGF1L100BE12MP12 21.0 XAFC30C 1075 29.0 22.9 14.50 12.00 29.0 18.7 8.55 6.75 3.60 2.36
RHP14L30B23S RGF1L100BE12MP12 17.5 XAHB30C 1050 28.4 22.8 14.50 12.00 29.0 18.9 8.55 6.80 3.64 2.44
RHP14L30B23S RGF1L100BE12MP12 17.5 XAHB36D 850 28.2 20.7 14.50 12.00 27.8 18.1 8.55 6.80 3.52 2.48
RHP14L30B23S RGF1L100CE16MP12 21.0 CF/CM/CU36C 925 29.6 21.8 15.75 13.00 29.8 19.2 9.00 7.50 3.90 2.74
RHP14L30B23S RGF1L100CE16MP12 21.0 CF/CM/CU42C 925 29.8 22.0 15.75 13.00 30.0 18.8 9.00 7.25 4.02 2.72
RHP14L30B23S RGF1L100CE16MP12 21.0 CF/CM30C 925 29.6 21.8 15.75 13.00 29.8 19.2 9.00 7.50 3.90 2.74
RHP14L30B23S RGF1L100CE16MP12 21.0 XAFC30C 1100 29.0 23.2 15.00 12.50 29.0 18.6 8.55 6.80 3.66 2.40
RHP14L30B23S RGF1L100CE16MP12 21.0 XAFC36D 875 28.6 20.9 15.00 12.50 28.4 18.3 9.00 7.15 3.64 2.52
RHP14L30B23S RGF1L100CE16MP12 21.0 XAHC36D 1050 29.2 23.1 14.50 12.50 28.4 18.4 9.00 7.25 3.72 2.54
RHP14L30B23S RGF1L100CE20MP12 21.0 XAFC36D 1200 30.0 23.6 15.00 12.50 29.0 19.1 9.00 7.20 3.90 2.66
RHP14L30B23S RGF1L100CE20MP12 21.0 XAHC36D 1175 29.8 24.6 14.50 12.50 28.8 18.6 9.00 7.20 3.84 2.58
RHP14L30B23S RGF1L120CE16MP12 21.0 CF/CM/CU36C 950 29.6 22.0 15.75 13.00 29.8 19.3 9.00 7.45 3.92 2.76
RHP14L30B23S RGF1L120CE16MP12 21.0 CF/CM/CU42C 950 29.8 22.2 15.75 13.00 30.0 18.8 9.00 7.25 4.06 2.74
RHP14L30B23S RGF1L120CE16MP12 21.0 CF/CM30C 950 29.6 22.0 15.75 13.00 29.8 19.3 9.00 7.45 3.92 2.76
RHP14L30B23S RGF1L120CE16MP12 21.0 XAFC30C 1100 29.0 23.2 15.00 12.50 29.0 18.6 8.55 6.80 3.66 2.40
RHP14L30B23S RGF1L120CE16MP12 21.0 XAFC36D 900 28.6 21.0 15.00 12.50 28.4 18.3 9.00 7.10 3.66 2.52
RHP14L30B23S RGF1L120CE16MP12 21.0 XAHC36D 1050 29.2 23.1 14.50 12.50 28.4 18.4 9.00 7.25 3.72 2.54
RHP14L30B23S RGF2L080BE12MP11 17.5 CF/CM/CU30B 825 28.8 21.4 15.50 12.75 30.0 19.5 9.50 8.05 3.82 2.70
RHP14L30B23S RGF2L080BE12MP11 17.5 CF/CM/CU36B 825 29.6 21.8 15.75 13.00 30.0 20.0 9.50 7.65 4.26 2.90
RHP14L30B23S RGF2L080BE12MP11 17.5 CF30BBBA1 825 28.8 21.4 15.50 12.75 30.0 19.5 9.50 8.05 3.82 2.70
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5612272-UTG-H-1221
20 Johnson Controls Ducted Systems
RHP14L30B23S RGF2L080BE12MP11 17.5 CF42B 1000 29.4 22.2 15.25 12.50 28.8 19.1 9.00 — 3.92 2.70
RHP14L30B23S RGF2L080BE12MP11 17.5 CM30BBBA1 825 28.8 21.4 15.50 12.75 30.0 19.5 9.50 8.05 3.82 2.70
RHP14L30B23S RGF2L080BE12MP11 17.5 XAF/XAUB30C 975 28.4 22.2 14.50 12.00 29.0 18.6 8.55 6.90 3.52 2.34
RHP14L30B23S RGF2L080BE12MP11 17.5 XAF/XAUB36D 800 28.2 20.2 15.00 12.50 28.2 18.2 8.55 6.90 3.58 2.46
RHP14L30B23S RGF2L080BE12MP11 21.0 XAFC30C 975 28.4 22.2 14.50 12.00 29.0 18.6 8.55 6.90 3.52 2.34
RHP14L30B23S RGF2L080BE12MP11 17.5 XAHB30C 950 28.4 21.9 14.50 12.00 29.0 18.8 8.55 6.85 3.58 2.44
RHP14L30B23S RGF2L080BE12MP11 17.5 XAHB36D 925 28.6 21.7 14.50 12.00 28.2 18.3 9.00 7.30 3.58 2.48
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM/CU30C 950 29.4 23.0 15.75 13.00 30.0 19.4 9.50 7.95 3.98 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM/CU30D 975 29.6 23.4 15.75 13.00 29.8 19.4 9.50 7.90 4.00 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM/CU36C 1000 29.2 22.0 15.25 12.75 29.0 19.5 9.00 — 3.94 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM/CU42C 1000 29.6 22.2 15.50 13.00 28.6 19.1 9.00 — 3.96 2.72
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM30C 950 29.4 23.0 15.75 13.00 30.0 19.4 9.50 7.95 3.98 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM36D 1000 29.2 22.0 15.50 12.75 29.0 19.5 9.00 — 3.94 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM36D 1000 29.2 22.0 15.50 12.75 29.0 19.5 9.00 — 3.94 2.76
RHP14L30B23S RGF2L100CE16MP11 21.0 CF/CM42D 1000 29.6 22.2 15.50 12.75 28.6 19.0 9.00 — 3.96 2.74
RHP14L30B23S RGF2L100CE16MP11 21.0 XAFC30C 1150 29.0 23.7 15.00 12.50 29.0 18.6 8.55 6.70 3.70 2.42
RHP14L30B23S RGF2L100CE16MP11 21.0 XAFC36D 950 29.0 21.6 15.00 12.50 28.4 18.4 9.00 7.15 3.72 2.56
RHP14L30B23S RGF2L100CE16MP11 21.0 XAHC36D 925 28.8 21.9 14.50 12.50 28.0 18.1 9.00 7.20 3.62 2.52
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM/CU30C 1000 29.6 23.8 15.75 13.00 30.0 19.3 9.50 7.90 4.00 2.80
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM/CU30D 1000 29.6 23.8 15.75 13.00 30.0 19.3 9.50 7.90 4.00 2.80
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM/CU36C 1000 30.0 23.8 15.75 13.00 30.0 19.9 9.50 7.55 4.48 2.98
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM/CU42C 1000 29.6 22.2 15.50 13.00 28.6 19.1 9.00 — 3.96 2.72
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM30C 1000 29.6 23.8 15.75 13.00 30.0 19.3 9.50 7.90 4.00 2.80
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM36D 1000 29.2 22.0 15.50 12.75 29.0 19.5 9.00 — 3.94 2.76
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM36D 1000 29.2 22.0 15.50 12.75 29.0 19.5 9.00 — 3.94 2.76
RHP14L30B23S RGF2L100CE20MP11 21.0 CF/CM42D 1000 29.6 22.2 15.50 12.75 28.6 19.0 9.00 — 3.96 2.74
RHP14L30B23S RGF2L100CE20MP11 21.0 XAFC30C 1200 29.0 24.2 15.00 12.50 29.0 18.6 8.55 6.60 3.78 2.44
RHP14L30B23S RGF2L100CE20MP11 21.0 XAFC36D 950 29.0 21.6 15.00 12.50 28.4 18.4 9.00 7.15 3.72 2.56
RHP14L30B23S RGF2L100CE20MP11 21.0 XAHC36D 925 28.8 21.9 15.00 12.50 28.0 18.1 9.00 7.20 3.64 2.52
RHP14L30B23S RGF19026AE08MP13 17.5 XAF/XAUB36D 850 28.0 20.2 14.00 11.50 28.6 18.6 8.55 6.80 3.50 2.42
RHP14L30B23S RGF19026AE08MP13 14.5 XAFA30D 825 27.8 19.9 14.00 11.50 28.6 18.6 8.55 6.90 3.46 2.40
RHP14L30B23S RGF19040AE10MP13 14.5 CF/CM/CU30A 825 29.0 20.4 15.00 12.25 29.8 19.5 9.00 7.65 3.64 2.60
RHP14L30B23S RGF19040AE10MP13 14.5 CF/CM/CU30B 850 29.0 20.6 15.00 12.25 29.8 19.5 9.00 7.65 3.68 2.62
RHP14L30B23S RGF19040AE10MP13 14.5 CF/CM/CU36B 850 29.0 20.6 15.00 12.25 29.8 19.5 9.00 7.65 3.68 2.62
RHP14L30B23S RGF19040AE10MP13 14.5 CF/CM36A 825 29.0 20.4 15.00 12.25 29.8 19.5 9.00 7.65 3.64 2.60
RHP14L30B23S RGF19040AE10MP13 14.5 CF30BBBA1 850 29.0 20.6 15.00 12.25 29.8 19.5 9.00 7.65 3.68 2.62
RHP14L30B23S RGF19040AE10MP13 14.5 CF42B 850 29.2 20.8 15.00 12.25 30.0 19.0 9.00 7.40 3.80 2.60
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF Region IV HSPF Region V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD