York International RHP13J18 THRU 60 Quick start guide

RHP SERIES
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: RHP13J18 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 5-Years limited compressor warranty.
Extended 10-Years limited parts and compressor warranty
when product is registered online within 90 days of purchase
for replacement or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
®
TECHNICAL
GUIDE
TECHNICAL
GUIDE
810753-UTG-A-0313
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It i76s designed with a matching indoor coil com-
ponent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
•Small Footprint - The compact footprint is a perfect fit for
any application.
•Quality Condenser Coils - The coil is constructed of copper
tubing and enhanced aluminum fins for increased perfor-
mance.
•Coil Protection - Coils are protected from damage by a slot-
ted, stamped steel coil guard.
•Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the com-
pressor against moisture and debris.
•Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
•Durable Finish - An automotive quality finish provides the
ultimate protection from harmful UV rays and rust-creep,
ensuring a long-lasting, high quality apprearance. A powder
paint top coat is applied over a baked on primer using a gal-
vanized, zinc coated steel base material.
•Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
•Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
•Low Operating Sound Levels - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.
•Low Maintenance - Long life, permanently lubricated motor-
bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
•Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

810753-UTG-A-0313
2Johnson Controls Unitary Products
* Adapter fitting required for 1-1/8" line set.
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
Physical and Electrical Data
MODEL RHP13J
184S2 RHP13J 244S2 RHP13J 304S2 RHP13J 364S2 RHP13J 424S2 RHP13J 484S2 RHP13J 604S2
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1187 to 252
Minimum Circuit Ampacity 11.9 11.2 14.1 19.7 20.9 25.6 42.6
Max. Overcurrent Device Amps 220 15 20 30 35 45 70
Min. Overcurrent Device Amps 315 15 15 20 25 30 45
Compressor
Amps
Type Scroll Recip Recip Recip Recip Recip Scroll
Rated Load 9.0 8.3 10.6 14.7 15.7 19.4 33.0
Locked Rotor 48.0 43.0 54.0 74.0 88.0 88.0 134.0
Crankcase Heater No Yes Yes Yes Yes Yes No
Factory External Discharge Muffler Yes No No No No No Yes
Factory External Check Valve No No No No No No No
HS Kit Required with TXV 4No Yes Yes Yes Yes Yes* No
Fan Diameter Inches 24 24 24 24 24 24 24
Fan Motor
Rated HP 1/10 1/8 1/8 1/4 1/4 1/4 1/4
Rated Load Amps 0.70 0.80 0.80 1.3 1.3 1.3 1.5
Nominal RPM 825 1075 1075 850 850 850 850
Nominal CFM 2000 2900 3000 3800 3800 3600 3550
Coil Face Area Sq. Ft. 15.7 18.3 21.0 23.6 23.6 23.6 23.6
Rows Deep 1 1 1 1 1 2 2
Fins / Inch 22 22 22 22 22 18 18
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 1-1/8
Unit Charge (Lbs. - Oz.) 56 - 6 9 - 6 9 - 0 10 - 0 9 - 10 14 - 12 15 - 0
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 .76
Operating Weight Lbs. 172 194 206 218 218 285 290
* These models are shipped with a Hard Start Kit installed at the factory.
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or
subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
B
C
A
Unit
Model
Dimensions
(Inches) Refrigerant Connection Service Valve Size
A B C Liquid Vapor
18 28-1/4 34 34
3/8
3/4
24 32-1/4 34 34
30 36-1/4 34 34
36 40-1/4 34 34
42 40-1/4 34 34 7/8
48 40-1/4 34 34
60 40-1/4 34 34 7/8*

810753-UTG-A-0313
Johnson Controls Unitary Products 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
System Charge for Various Matched Systems
Outdoor Unit RHP13J184S2 RHP13J244S2 RHP13J304S2 RHP13J364S2 RHP13J424S2 RHP13J484S2 RHP13J604S2
Required Orifice or TXV 1,2 .051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4K1 4K1
Indoor Unit 3,4,5 Additional Charge, Oz
RFCX18BE .051/ TXV + 0 – – – – – –
RFCX24BE –.054 / TXV + 0 – – – – –
RFCX30BE –.054 / TXV + 0 .063 / TXV + 0 – – – –
RFCX36CE – – .063 / TXV + 25 .071 / TXV + 0 – – –
RFCX42DE – – – .071 / TXV + 16 – – –
RFCX48DE – – – – .075 / TXV + 0 TXV + 0 –
RFCX60DE – – – – – TXV + 25 TXV + 0
RFCX18BP .051/ TXV + 0 – – – – – –
RFCX24BP –.054 / TXV + 0 – – – – –
RFCX30BP – – .063 / TXV + 0 – – – –
RFCX36BP – – .063 / TXV + 25 .071 / TXV + 6 – – –
RFCX42CP – – – .071 / TXV + 16 – – –
RFCX48DP – – – – .075 / TXV + 0 TXV + 0 –
RFCX60DP – – – – – TXV + 25 TXV + 0
FC/MC/PC18 .051/ TXV + 0 – – – – – –
FC/MC/PC24 .051/ TXV + 5 – – – – – –
FC/MC/PC30 .051/ TXV + 5 – – – – – –
FC/MC/PC32 –.059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC35 –.059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC37 –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC43 –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC/UC48 – – – .071 / TXV + 16 – – –
FC/MC/PC/UC60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC62 – – – – – TXV + 25 TXV + 0
FC64 – – – – – – TXV + 23
UC18 .051/ TXV + 1 – – – – – –
UC24 .051/ TXV + 7 – – – – – –
UC30 .051/ TXV + 7 – – – – – –
UC48 – – – .071 / TXV + 25 – – –
UC60 – – – – .075 / TXV + 2 TXV + 11 –
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.

810753-UTG-A-0313
4Johnson Controls Unitary Products
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
13 SEER HP WITH AIR HANDLERS
RHP13J184S21
RFCX18BE 17.5 – 610 18.0 14.6 14.00 12.00
RFCX18BP 17.5 – 665 18.0 14.9 13.00 11.00
MX12B 17.5 FC/MC18B 585 18.0 14.5 14.50 12.00
MX12B 17.5 FC/MC24B 645 18.0 15.0 14.50 12.00
MX12B 17.5 FC/MC30B 645 18.0 15.0 14.50 12.00
RHP13J244S21
RFCX24BE 17.5 – 795 24.0 17.4 14.50 12.00
RFCX30BE 17.5 – 795 24.0 17.4 14.50 12.00
RFCX24BP 17.5 – 740 24.0 16.9 13.00 11.00
MX12B 17.5 FC/MC35B 815 24.0 17.6 14.50 12.00
MX12B 17.5 FC/MC43B 735 24.0 17.1 14.50 12.00
RHP13J304S21
RFCX30BE 17.5 – 985 29.2 21.0 14.00 12.00
RFCX36CE 21.0 – 1000 29.8 21.8 14.00 12.00
RFCX30BP 17.5 – 1090 29.2 21.8 13.00 11.00
RFCX36BP 17.5 – 1060 29.6 21.6 13.00 11.00
MX12B 17.5 FC/MC35B 1085 29.6 22.2 14.00 12.00
MX12B 17.5 FC/MC43B 1095 29.4 22.6 14.00 12.00
MX16C 21.0 FC/MC35C 1035 29.6 22.2 14.00 12.00
MX16C 21.0 FC/MC43C 970 29.6 21.6 14.00 12.00
RHP13J364S21
RFCX36CE 21.0 – 1190 35.6 25.7 14.50 12.00
RFCX42DE 24.5 – 1180 35.6 25.6 14.50 12.00
RFCX36BP 21.0 – 1245 35.6 26.1 13.00 11.00
RFCX42CP 21.0 – 1230 35.6 25.8 13.00 11.00
MX12B 17.5 FC/MC43B 1220 35.6 26.0 14.00 12.00
MX12D 24.5 FC/MC48D 1225 35.6 25.7 14.50 12.00
MX16C 21.0 FC/MC43C 1140 35.6 25.5 14.00 12.00
MX16C 21.0 FC/MC48C 1150 35.6 25.6 14.00 12.00
RHP13J424S21
RFCX48DE 24.5 – 1385 40.5 33.2 14.00 12.00
RFCX48DP 24.5 – 1320 39.5 29.6 13.00 11.00
MX16C 21.0 FC60C 1420 41.5 32.2 14.50 12.00
MX20D 24.5 FC/MC60D 1470 41.5 32.2 14.50 12.00
RHP13J484S21
RFCX48DE 24.5 – 1635 44.0 33.2 14.00 12.00
RFCX60DE 24.5 – 1565 45.0 34.4 14.50 12.00
RFCX48DP 24.5 – 1610 43.5 32.8 13.00 11.00
RFCX60DP 24.5 – 1620 44.0 33.8 13.25 11.35
MX16C 21.0 FC60C 1630 45.0 34.4 14.50 12.00
MX20D 24.5 FC/MC60D 1585 45.5 34.6 14.50 12.00
MX20D 24.5 FC/MC62D 1605 45.0 34.4 14.50 12.00
RHP13J604S21
RFCX60DE 24.5 – 1950 58.0 41.50 13.00 11.00
RFCX60DP 24.5 – 1835 58.0 41.00 14.00 12.00
MX20D 24.5 FC/MC62D 1795 58.0 41.0 14.00 12.00
MX20D 24.5 FC64D 1795 57.0 42.5 13.75 12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

810753-UTG-A-0313
Johnson Controls Unitary Products 5
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the RGF1L*P and RGF19*P, use Coil Only Ratings.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL CFM RANGE
(Min.-max.)
COOLING
MODEL WIDTH RATED CFM NET MBH SEER1EER
TOTAL SENS.
13 SEER HP COIL ONLY RATINGS
RHP13J184S21
FC/MC/PC18 14.5,17.5 450 - 750 600 18.0 14.0 13.00 11.00
FC/MC/PC24 14.5,17.5 450 - 750 600 18.0 14.0 13.50 11.00
FC/MC/PC30 14.5,17.5 450 - 750 600 18.0 13.7 13.00 11.00
UC24 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
UC30 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
RHP13J244S21
FC/MC/PC32 14.5 600 - 1000 800 23.8 17.1 13.00 11.00
FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00
FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC43 17.5,21.0 600 - 1000 800 24.0 17.3 13.00 11.00
RHP13J304S21
FC/MC/PC32 14.5 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC35 17.5,21.0 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC37 14.5 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC43 17.5,21.0 800 - 1200 1000 30.0 22.2 13.00 11.00
RHP13J364S21
FC/MC/PC37 14.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
FC/MC/PC43 17.5,21.0 1000 - 1400 1200 36.0 26.6 13.00 11.00
FC/MC/PC48 21.0,24.5 1000 - 1400 1200 36.0 26.6 13.00 11.00
UC48 21.0,24.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
RHP13J424S21 FC/MC/PC60 21.0,24.5 1200 - 1600 1400 41.0 31.8 13.00 11.00
UC60 21.0,24.5 1200 - 1600 1400 40.5 31.0 13.00 11.00
RHP13J484S21 FC/MC/PC60 21.0,24.5 1400 - 1800 1600 44.0 33.4 13.00 11.00 FC/MC62 24.5 1400 - 1800 1600 44.5 33.8 13.00 11.00
UC60 21.0,24.5 1400 - 1800 1600 44.0 32.8 13.00 11.00
RHP13J604S21 FC/MC62 24.5 1600 - 2000 1800 57.5 41.0 13.25 11.35
FC64 24.5 1600 - 2000 1800 56.5 42.5 13.00 11.00
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
RHP13J184S21
R*L*AE12 14.5 FC/MC/PC18A 540 18.0 14.3 14.00 12.00
R*L*AE12 14.5 FC/MC/PC24A 595 18.0 14.9 14.00 12.00
R*L*AE12 14.5 FC/MC/PC30A 595 18.0 14.9 14.00 12.00
R*L*AE12 14.5 UC18B 590 18.0 13.9 14.50 12.00
R*L*AE12 14.5 UC24B 570 18.0 14.1 14.50 12.00
R*L*AE12 14.5 UC30B 570 18.0 14.1 14.50 12.00
R*L*BE12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00
R*L*BE12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00
R*L*BE12 17.5 FC/MC/PC30B 620 18.0 14.9 14.00 12.00
R*L*BE12 17.5 UC18B 595 18.0 13.9 14.50 12.00
R*L*BE12 17.5 UC24B 575 18.0 14.2 14.50 12.00
R*L*BE12 17.5 UC30B 575 18.0 14.2 14.50 12.00
R*9*AE10 14.5 FC/MC/PC18A 575 18.3 13.7 14.00 12.00
R*9*AE10 14.5 FC/MC/PC24A 595 18.7 14.1 14.00 12.00
R*9*AE10 14.5 FC/MC/PC30A 595 18.7 14.1 14.00 12.00
R*9*BE12 17.5 FC/MC/PC18B 590 18.0 14.7 14.00 12.00
R*9*BE12 17.5 FC/MC/PC24B 615 18.0 14.9 14.00 12.00
For Notes See Page 7.

810753-UTG-A-0313
6Johnson Controls Unitary Products
RHP13J184S21
R*9*BE12 17.5 FC/MC/PC30B 615 18.0 14.9 14.00 12.00
R*9*BE12 17.5 UC18B 17 590.0 18.5 13.90 14.50
R*9*BE12 17.5 UC24B 17 615.0 18.9 14.20 14.50
R*9*BE12 17.5 UC30B 17 615.0 18.9 14.20 14.50
RHP13J244S21
R*L*AE12 14.5 FC/MC/PC32A 800 24.0 17.5 14.50 12.00
R*L*AE12 14.5 FC/MC/PC37A 840 24.0 17.8 14.50 12.00
R*L*BE12 17.5 FC/MC/PC35B 850 24.0 17.6 14.50 12.00
R*L*BE12 17.5 FC/MC/PC43B 865 24.0 18.0 14.50 12.00
R*L*CE16 21.0 FC/MC/PC35C 865 24.0 17.6 14.50 12.00
R*L*CE16 21.0 FC/MC/PC43C 855 24.0 17.9 14.50 12.00
R*L*CE20 21.0 FC/MC/PC35C 885 24.0 17.6 14.50 12.00
R*L*CE20 21.0 FC/MC/PC43C 815 24.0 17.3 14.50 12.00
R*9*AE10 14.5 FC/MC/PC32A 745 24.0 17.6 13.75 12.00
R*9*AE10 14.5 FC/MC/PC37A 740 24.0 17.7 14.00 12.00
R*9*BE12 17.5 FC/MC/PC35B 785 24.0 17.4 14.50 12.00
R*9*BE12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
R*9*CE16 21.0 FC/MC/PC35C 765 24.0 17.3 14.50 12.00
R*9*CE16 21.0 FC/MC/PC43C 785 24.0 17.3 14.50 12.00
R*9*CE20 21.0 FC/MC/PC35C 825 24.0 17.6 14.50 12.00
R*9*CE20 21.0 FC/MC/PC43C 790 24.0 17.3 14.50 12.00
RHP13J304S21
R*L*AE12 14.5 FC/MC/PC32A 970 30.0 22.0 14.00 12.00
R*L*AE12 14.5 FC/MC/PC37A 1105 30.0 23.2 14.50 12.00
R*L*BE12 17.5 FC/MC/PC35B 1120 30.0 23.2 14.50 12.00
R*L*BE12 17.5 FC/MC/PC43B 1125 30.0 23.4 14.50 12.00
R*L*CE16 21.0 FC/MC/PC35C 1105 30.0 23.2 14.50 12.00
R*L*CE16 21.0 FC/MC/PC43C 955 30.0 22.2 14.50 12.00
R*L*CE20 21.0 FC/MC/PC35C 850 29.8 21.4 14.50 12.00
R*L*CE20 21.0 FC/MC/PC43C 870 30.0 21.6 14.50 12.00
R*9*BE12 17.5 FC/MC/PC35B 1085 30.0 23.0 14.50 12.00
R*9*BE12 17.5 FC/MC/PC43B 1095 30.0 23.2 14.50 12.00
R*9*CE16 21.0 FC/MC/PC35C 1075 30.0 23.0 14.50 12.00
R*9*CE16 21.0 FC/MC/PC43C 1055 30.0 22.8 14.50 12.00
R*9*CE20 21.0 FC/MC/PC35C 835 29.8 21.2 14.50 12.00
R*9*CE20 21.0 FC/MC/PC43C 720 29.2 19.9 14.50 12.00
RHP13J364S21
R*L*AE12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00
R*L*BE12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.00
R*L*CE16 21.0 FC/MC/PC43C 1175 36.0 26.8 14.50 12.00
R*L*CE16 21.0 FC/MC/PC48C 1185 36.0 26.6 14.50 12.00
R*L*CE16 21.0 UC48C 1185 36.0 26.8 14.50 12.00
R*L*CE20 21.0 FC/MC/PC43C 1250 36.0 27.4 14.50 12.00
R*L*CE20 21.0 FC/MC/PC48C 1270 36.0 27.2 14.50 12.00
R*L*CE20 21.0 UC48C 1270 36.0 27.4 14.50 12.00
R*9*BE12 17.5 FC/MC/PC43B 1270 36.0 27.4 14.50 12.00
R*9*CE16 21.0 FC/MC/PC43C 1260 36.0 27.4 14.50 12.00
R*9*CE16 21.0 FC/MC/PC48C 1280 36.0 27.2 14.50 12.00
R*9*CE16 21.0 UC48C 1280 36.0 27.4 14.50 12.00
R*9*CE20 21.0 FC/MC/PC43C 1185 36.0 26.8 14.50 12.00
R*9*CE20 21.0 FC/MC/PC48C 1205 36.0 26.6 14.50 12.00
R*9*CE20 21.0 UC48C 1205 36.0 26.8 14.50 12.00
R*9*DE20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
R*9*DE20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
For Notes See Page 7.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2

810753-UTG-A-0313
Johnson Controls Unitary Products 7
PSC furnaces, such as the RGF1L*P and RGF19*P, use Coil Only Ratings.
RHP13J424S21
R*L*CE16 21.0 FC/PC60C 1360 42.0 32.6 14.50 12.00
R*L*CE16 21.0 UC60C 1400 41.5 31.6 14.00 12.00
R*L*CE20 21.0 FC/PC60C 1485 42.0 33.4 14.50 12.00
R*L*CE20 21.0 UC60C 1485 41.5 32.8 14.00 12.00
R*9*CE16 21.0 FC/PC60C 1460 42.0 33.2 14.00 12.00
R*9*CE16 21.0 UC60C 1460 41.0 31.4 13.75 11.50
R*9*CE20 21.0 FC/PC60C 1460 42.0 33.2 14.50 12.00
R*9*CE20 21.0 UC60C 1460 41.5 31.6 14.00 12.00
R*9*DE20 24.5 FC/MC/PC60D 1515 42.0 33.6 14.50 12.00
R*9*DE20 24.5 UC60D 1515 42.0 33.2 14.50 12.00
RHP13J484S21
R*L*CE16 21.0 FC/MC62D 1610 45.0 34.2 14.50 12.00
R*L*CE16 21.0 FC/PC60C 1605 44.5 33.8 14.50 12.00
R*L*CE16 21.0 UC60C 1605 44.5 33.2 14.50 12.00
R*L*CE20 21.0 FC/MC62D 1665 45.5 34.4 14.50 12.00
R*L*CE20 21.0 FC/PC60C 1595 44.5 34.0 14.50 12.00
R*L*CE20 21.0 UC60C 1540 45.0 33.6 14.50 12.00
R*9*CE16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00
R*9*CE16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00
R*9*CE16 21.0 UC60C 1575 44.5 33.2 14.50 12.00
R*9*CE20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00
R*9*CE20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00
R*9*CE20 21.0 UC60C 1625 44.5 33.2 14.50 12.00
R*9*DE20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00
R*9*DE20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00
R*9*DE20 24.5 UC60D 1490 44.5 32.8 14.50 12.00
RHP13J604S21
R*L*CE20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00
R*L*CE20 21.0 FC64D 1665 56.0 41.0 13.75 11.60
R*9*CE20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00
R*9*CE20 21.0 FC64D 1595 55.5 40.0 13.50 11.40
R*9*DE20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00
R*9*DE20 24.5 FC64D 1645 56.0 40.5 13.50 11.40
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2

810753-UTG-A-0313
8Johnson Controls Unitary Products
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during
the same period.
MA Modular Air Handlers use Coil Only Ratings.
— = Not Applicable.
HEATING CAPACITY - With Air Handler
UNIT
MODEL AIR HANDLER COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH AIR HANDLERS
RHP13J184S21
RFCX18BE – 18.0 3.70 1.43 11.1 2.28 1.43 7.70
RFCX18BP – 18.0 3.54 1.49 11.4 2.22 1.50 7.70
MX12B FC/MC18B 18.0 3.70 1.43 11.0 2.28 1.41 8.20
MX12B FC/MC24B 18.03.981.3310.92.461.308.20
MX12B FC/MC30B 18.03.981.3310.92.461.308.20
RHP13J244S21
RFCX24BE – 23.43.581.9213.32.501.568.20
RFCX30BE – 23.43.581.9213.32.501.568.20
RFCX24BP – 23.43.402.0213.52.401.657.70
MX12B FC/MC35B 23.23.641.8713.02.561.498.20
MX12B FC/MC43B 23.23.621.8813.02.541.508.20
RHP13J304S21
RFCX30BE – 26.63.402.2915.52.421.887.70
RFCX36CE – 26.83.562.2115.32.501.797.70
RFCX30BP – 27.63.302.4516.22.322.057.70
RFCX36BP – 27.83.362.4216.22.322.057.70
MX12B FC/MC35B 26.83.462.2715.52.441.867.70
MX12B FC/MC43B 27.23.562.2415.62.481.847.70
MX16C FC/MC35C 26.43.562.1715.22.521.777.70
MX16C FC/MC43C 26.43.562.1715.22.501.787.70
RHP13J364S21
RFCX36CE – 30.63.442.6121.62.842.238.20
RFCX42DE – 30.63.482.9321.42.882.428.20
RFCX36BP – 31.43.282.8022.62.682.477.70
RFCX42CP – 31.43.322.7722.22.702.417.70
MX12B FC/MC43B 30.83.382.6721.82.782.307.70
MX12D FC/MC48D 30.83.482.5921.62.842.238.20
MX16C FC/MC43C 30.23.442.5721.02.842.177.70
MX16C FC/MC48C 30.23.482.5421.42.882.187.70
RHP13J424S21
RFCX48DE – 39.03.903.0021.82.642.528.20
RFCX48DP – 40.03.663.2022.42.482.657.70
MX16C FC60C 40.04.082.8722.02.662.428.20
MX20D FC/MC60D 40.04.102.8621.82.682.388.20
RHP13J484S21
RFCX48DE – 45.53.683.6226.82.842.768.20
RFCX60DE – 44.53.723.5026.42.902.678.20
RFCX48DP – 46.03.563.7927.42.742.937.70
RFCX60DP – 45.53.523.7927.22.742.917.75
MX16C FC60C 45.03.803.4726.22.962.598.20
MX20D FC/MC60D 45.53.843.4726.62.942.658.20
MX20D FC/MC62D 45.53.803.5126.42.942.638.20
RHP13J604S21
RFCX60DE – 58.03.545.0139.02.764.148.20
RFCX60DP – 58.03.445.2840.02.684.378.15
MX20D FC/MC62D 58.03.584.9538.52.764.098.20
MX20D FC64D 58.03.445.2040.02.864.108.15
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.

810753-UTG-A-0313
Johnson Controls Unitary Products 9
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period forheating divided by the total electric power input during
the same period.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the RGF1L*P and RGF19*P, use Coil Only Ratings.
— = Not Applicable.
HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP COIL ONLY RATINGS
RHP13J184S21
FC/MC/PC18 18.0 3.36 1.50 12.7 2.16 1.24 8.20
FC/MC/PC24 18.0 3.36 1.45 10.4 2.60 1.17 8.20
FC/MC/PC30 18.0 3.42 1.54 11.4 2.18 1.53 7.75
UC24 18.0 3.42 1.54 11.4 2.20 1.52 7.75
UC30 18.0 3.42 1.54 11.4 2.20 1.52 7.75
RHP13J244S21
FC/MC/PC32 24.0 3.36 2.09 13.9 2.38 1.71 7.70
FC/MC/PC35 23.8 3.32 2.10 13.9 2.36 1.73 7.70
FC/MC/PC37 24.0 3.44 2.04 14.1 2.42 1.71 7.70
FC/MC/PC43 24.0 3.44 2.04 14.1 2.42 1.71 7.70
RHP13J304S21
FC/MC/PC32 27.4 3.28 2.45 16.0 2.30 2.04 7.70
FC/MC/PC35 27.4 3.28 2.45 16.0 2.30 2.04 7.70
FC/MC/PC37 28.0 3.38 2.43 16.1 2.32 2.03 7.70
FC/MC/PC43 28.0 3.38 2.43 16.1 2.32 2.03 7.70
RHP13J364S21
FC/MC/PC37 34.4 3.42 2.95 22.4 2.62 2.51 7.70
FC/MC/PC43 34.6 3.40 2.98 22.2 2.60 2.50 7.70
FC/MC/PC48 34.8 3.44 2.96 22.6 2.64 2.51 7.70
UC48 35.03.522.9122.42.622.517.70
RHP13J424S21 FC/MC/PC60 40.5 3.72 3.19 23.0 2.50 2.70 7.70
UC60 40.03.683.1822.82.482.697.70
RHP13J484S21 FC/MC/PC60 46.0 3.58 3.76 27.4 2.76 2.91 7.70 FC/MC62 46.0 3.54 3.81 27.4 2.76 2.91 7.70
UC60 46.03.563.7927.42.742.937.70
RHP13J604S21 FC/MC62 58.0 3.44 5.24 39.5 2.66 4.35 7.80
FC64 58.03.365.4940.52.764.307.80
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
HEATING CAPACITY - With High Efficiency Motor Furnaces
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
RHP13J184S21
R*L*AE12 FC/MC/PC18A 18.0 2.92 1.81 11.1 2.24 1.45 8.10
R*L*AE12 FC/MC/PC24A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
R*L*AE12 FC/MC/PC30A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
R*L*AE12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
R*L*AE12 UC24B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
R*L*AE12 UC30B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
R*L*BE12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.28 1.41 8.15
R*L*BE12 FC/MC/PC24B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
R*L*BE12 FC/MC/PC30B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
R*L*BE12 UC18B 18.0 3.58 1.56 11.1 2.24 1.45 8.20
R*L*BE12 UC24B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
R*L*BE12 UC30B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
For Notes See Page 11.

810753-UTG-A-0313
10 Johnson Controls Unitary Products
RHP13J184S21
R*9*AE10 FC/MC/PC18A 18.0 3.46 1.61 11.2 2.18 1.51 7.90
R*9*AE10 FC/MC/PC24A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
R*9*AE10 FC/MC/PC30A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
R*9*BE12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.30 1.40 8.10
R*9*BE12 FC/MC/PC24B18.03.161.6710.92.421.328.20
R*9*BE12 FC/MC/PC30B18.03.161.6710.92.421.328.20
R*9*BE12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
R*9*BE12 UC24B 18.03.721.4910.92.361.358.15
R*9*BE12 UC30B 18.03.721.4910.92.361.358.15
RHP13J244S21
R*L*AE12 FC/MC/PC32A23.23.641.8713.32.601.508.20
R*L*AE12 FC/MC/PC37A23.83.781.8413.52.661.498.20
R*L*BE12 FC/MC/PC35B23.43.681.8613.32.621.498.20
R*L*BE12 FC/MC/PC43B23.83.781.8413.52.661.498.20
R*L*CE16 FC/MC/PC35C23.43.681.8613.32.621.498.20
R*L*CE16 FC/MC/PC43C23.83.761.8513.42.641.498.20
R*L*CE20 FC/MC/PC35C23.63.621.9113.42.581.528.20
R*L*CE20 FC/MC/PC43C23.63.701.8713.52.621.518.20
R*9*AE10 FC/MC/PC32A24.03.441.9613.32.441.607.85
R*9*AE10 FC/MC/PC37A24.03.521.9513.42.481.587.85
R*9*BE12 FC/MC/PC35B23.03.581.8813.22.581.508.20
R*9*BE12 FC/MC/PC43B23.63.721.8613.42.641.498.20
R*9*CE16 FC/MC/PC35C23.03.561.8913.12.561.508.20
R*9*CE16 FC/MC/PC43C23.63.721.8613.42.641.498.20
R*9*CE20 FC/MC/PC35C23.43.661.8713.42.601.518.20
R*9*CE20 FC/MC/PC43C23.63.701.8713.52.621.518.20
RHP13J304S21
R*L*AE12 FC/MC/PC32A27.03.422.3115.62.401.907.95
R*L*AE12 FC/MC/PC37A27.83.642.2415.92.501.868.20
R*L*BE12 FC/MC/PC35B27.43.522.2815.62.441.878.10
R*L*BE12 FC/MC/PC43B27.83.622.2515.82.481.878.20
R*L*CE16 FC/MC/PC35C27.23.562.2415.42.461.838.15
R*L*CE16 FC/MC/PC43C27.23.642.1915.42.521.798.20
R*L*CE20 FC/MC/PC35C26.03.402.2414.92.441.797.85
R*L*CE20 FC/MC/PC43C26.43.522.2015.02.481.778.00
R*9*BE12 FC/MC/PC35B27.23.502.2815.52.441.868.10
R*9*BE12 FC/MC/PC43B27.63.602.2515.72.481.858.20
R*9*CE16 FC/MC/PC35C27.03.522.2515.52.461.858.10
R*9*CE16 FC/MC/PC43C27.43.602.2315.62.481.848.20
R*9*CE20 FC/MC/PC35C25.83.422.2114.72.441.777.80
R*9*CE20 FC/MC/PC43C25.63.342.2514.52.401.777.70
RHP13J364S21
R*L*AE12 FC/MC/PC37A34.43.622.7822.02.762.348.20
R*L*BE12 FC/MC/PC43B34.23.602.7822.02.762.348.20
R*L*CE16 FC/MC/PC43C33.43.642.6921.22.822.208.20
R*L*CE16 FC/MC/PC48C33.83.702.6821.62.862.218.20
R*L*CE16 UC48C 34.23.802.6421.42.862.198.20
R*L*CE20 FC/MC/PC43C34.03.662.7221.42.802.248.20
R*L*CE20 FC/MC/PC48C34.23.702.7121.62.842.238.20
R*L*CE20 UC48C 34.63.802.6721.82.842.258.20
R*9*BE12 FC/MC/PC43B34.23.582.8022.02.742.358.20
R*9*CE16 FC/MC/PC43C34.03.602.7721.82.762.318.20
R*9*CE16 FC/MC/PC48C34.63.662.7722.02.782.328.20
For Notes See Page 11.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3