York Survey Supply 53500 User manual

Code: 53500
Operating
Instructions
Ref:.. operat98 instructions 19 53500.qxp 07-01-19 ©York Survey Supply Centre 2019
500W
Halogen Work Light
Prospect House
George Cayley Drive
Clifton Moor
York
England
YO30 4XE
Tel: [phone]
Fax: [phone]
E-Mail: [e-mail]
...for secure online ordering of all our products!
Nothing else measures up!
York Survey Supply Centre
Follow us!
@York_Survey
@York_Survey

©York Survey Supply Centre 2019Ref:.. operat98 instructions 19 53500.qxp 07-01-19
IMPORTANT: READ THIS INFORMATION BEFORE USE!
Assem ly Instructions
Do not assem le while plugged into power.
1. Insert stand ase (1) into 2. Lamp angle may e
other end of tu e. Use the altered simply y
stand handle (2) to position loosening the angle
the lamp to the desired angle. adjustment kno (3)
Insert and tighten angle moving the stand handle to
adjustment kno (3) to ring the lamp to the
desired angle, then
tightening the angle fixing
kno
Inserting or Replacing Halogen Lamp
Important: Ensure unit is disconnected from power
point. Allow time for unit to cool efore handling.
1. Unscrew retaining screw 2. Lower front surround
on top of lamp. This will down. It will e retained
release the protective grid, y the hinges
front surround and glass
faceplate.
3. To insert halogen tu e: 4. Carefully replace front
unwrap glo e, taking care surround, making sure it
your fingers do not touch is correctly positioned.
the tu e. Use wrapping Screw up tightly.
to handle the tu e. Push
one end of tu e into either
of the spring-loaded sockets.
Locate other end on other
socket, and release.