YORKVILLE LP-LED2M User manual
SERVICE MANUAL
LP-LED2M
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
0DQXDO6HUYLFH/3/('0YÜ)HEUXDU\
The exclamation point within an equilatereal triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est prévu pour alerter l’utilisateur de la présence
d’instructions importantes dans la littérature accompagnant l’appareil en ce qui concerne l’opération et la
maintenance de cet appareil.
This lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
Ce symbole d’éclair avec tête de flèche dans un triangle équilatéral est prévu pour alerter l’utilisateur de la
présence d’un «voltage dangereux» non-isolé à proximité de l’enceinte du produit qui pourrait être d’ampleur
suffisante pour présenter un risque de choque électrique.
DOC-Safety-5v0+UL60065-00-1v9 • February 2, 2022
Instructions pertaining to a risk of fire, electric shock, or injury to a person
Read Instructions: The Owner’s Manual should be read and understood before operation of your unit. Please, save these instructions for future
reference and heed all warnings.
Cleaning: Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water!
Warning: When using electric products, basic precautions should always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized
plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme
on the unit is not defeated. An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. Only use
attachments/accessories specified by the manufacturer.
Equipment that is suspended overhead must use a secondary safeguard to prevent personal injury in the event the primary mounting mechanism
fails. Safety eyebolts attached to the equipment and galvanized steel wire can be used together to implement a failsafe mounting thus ensuring the
safety of the equipment and anyone positioned below the equipment.
Improper installation can result in bodily injury or death. If you are not qualified to attempt the installation get help from a professional structural rigger.
Note: Prolonged use of headphones at a high volume may cause health damage to your ears.
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require installation by an instructed
person or the use of ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other.A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be damaged.
Protect the power cord from being walked on or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To
completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from theAC receptacle. The mains plug of the power
supply cord shall remain readily operable.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, requires battery pack replacement or has been dropped.
Disconnect power before servicing!
Instructions relatives au risque de feu, choc électrique, ou blessures aux personnes
Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil. Conservez. Gardez S.V.P. ces
instructions pour consultations ultérieures et observez tous les avertissements.
Nettoyage: Nettoyez seulement avec le tissu sec.
Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas cet appareil à la pluie ou à l'humidité. N’utilisez pas cet appareil
près de l’eau!
Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des précautions de bases incluant celle qui suivent:
Alimentation - L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de raccordement à moins qu’il soit
possible d’insérer complètement les trois lames. Des précautions doivent êtres prises afin d’eviter que le système de mise à la terre de l’appareil ne soit
désengagé. Un appareil construit selon les normes de CLASS I devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise à
la masse. Lorsqu’une prise de branchement ou un coupleur d'appareils est utilisée comme dispositif de débranchement, ce dispositif de débranchement
devra demeurer pleinement fonctionnel avec raccordement à la masse.
Risque - Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir
des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le fabricant ou vendus avec le produit. Suivre
les instructions du fabricant pour installer l’appareil et utiliser les accessoires recommandés par le fabricant. Utilisez seulement les attachements/accessoires
indiqués par le fabricant.
L'équipement suspendu au-dessus de la tête doit utiliser une protection secondaire pour éviter les blessures en cas de défaillance du mécanisme
de montage principal. Les boulons à œil de sécurité fixés à l'équipement et le fil d'acier galvanisé peuvent être utilisés ensemble pour mettre en
œuvre un montage à sécurité intégrée, assurant ainsi la sécurité de l'équipement et de toute personne placée sous l'équipement.
Une installation incorrecte peut entraîner des blessures corporelles ou la mort. Si vous n'êtes pas qualifié pour tenter l'installation, demandez l'aide
d'un gréeur structurel professionnel.
Remarque : L'utilisation prolongée d'écouteurs à un volume élevé peut nuire à la santé de vos oreilles.
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel que des vases ne doit être
placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à l’installation près de source de chaleur tels que radiateurs, registre de
chaleur, fours ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages extérieurs connectés à ces
dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’Alimentation - Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de mise à la masse du cordon
d’alimentation. Une prise polarisée dispose de deux lames dont une plus large que l’autre. Une prise avec tige de mise à la masse dispose de deux lames
en plus d’une troisième tige qui connecte à la masse. La lame plus large ou la tige de mise à la masse est prévu pour votre sécurité. La prise murale est
désuète si elle n’est pas conçue pour accepter ce type de prise avec dispositif de sécurité. Dans ce cas, contactez un électricien pour faire remplacer la
prise murale. Évitez d’endommager le cordon d’alimentation. Protégez le cordon d’alimentation. Assurez-vous qu’on ne marche pas dessus et qu’on ne le
pince pas en particulier aux prises. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé. Pour débrancher complètement cet appareil
de l’alimentation CA principale, déconnectez le cordon d’alimentation de la prise d’alimentation murale. Le cordon d’alimentation du bloc d’alimentation de
l’appareil doit demeurer pleinement fonctionnel.
Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
Service - L'appareil ne doit être entretenu que par un personnel de service qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de
quelque manière que ce soit, comme le cordon d'alimentation ou la fiche est endommagé, du liquide a été renversé ou des objets sont tombés dans l'appareil,
l'appareil a été exposé à la pluie ou à l'humidité, ne fonctionne pas normalement , nécessite le remplacement de la batterie ou est tombé. Débranchez
l'alimentation avant l'entretien!
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS
AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE) NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR. CONSULTEZ UN TECHNICIEN
QUALIFIE POUR L’ENTRETIENT CE PRODUIT EST POUR L’USAGE À L’INTÉREUR SEULEMENT. LES PACKS
BATTERIES INSTALLÉS NE DOIVENT PAS ÊTRE EXPOSÉS À UNE CHALEUR EXCESSIVE TELLE QUE LE
ENSOLEILLEMENT, LE FEU OU SIMILAIRES.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY!
INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT
SUCH AS SUNSHINE, FIRE OR THE LIKE.
SEPARATE
COLLECTION
WEEE
DO NOT
PUSH OR PULL
CAUTION: OVERHEAD LOAD
ATTENTION: CHARGE AÉRIENNE
The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING:
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be
placed on this apparatus.
• To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
• The mains plug of the power supply cord or appliance coupler shall remain readily accessible.
Le symbole représentant un éclair avec une flèche à l’intérieur d’un triangle équilatéral est utilisé pour prévenir l’utilisateur de la
présence d’une tension électrique dangereuse non isolée à l’intérieur de l’appareil. Cette tension est d’un niveau suffisamment
élevé pour représenter un risque d’électrocution
Le symbole représentant un point d’exclamation à l’intérieur d’un triangle équilatéral, signale à l’utilisateur la présence d’instructions importantes
relatives au fonctionnement et à l’entretien de l’appareil dans cette notice d’installation
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Respecter tous les avertissements.
4. Suivez toutes les instructions.
5. N'utilisez pas l'appareil près de l'eau.
6. Nettoyer uniquement avec chiffon sec.
7. Ne bloquez pas les ouvertures de ventilation. Installer en suivant les instructions du fabricant.
8. Ne pas installer près des sources de chaleur telles que radiateurs, bouches de chaleur, four ou autres appareils (y compris les amplificateurs)
produisant de la chaleur.
9. N'annulez pas l'objectif sécuritaire de la fiche polarisée ou de la tige de mise à la terre. Une fiche polarisée possède deux lames avec une plus large
que l'autre. Une prise avec mise à la terre possède deux lames et une troisième tige. La lame large ou la troisième tige sont fournis pour votre sécurité.
Si la fiche n'entre pas dans votre prise, consultez un électricien pour remplacer la prise obsolète.
10. Protéger le cordon d'alimentation des piétinements ou pincements en particulier près des fiches, des prises de courant et au point de
sortie de l'appareil.
11. Utilisez uniquement les accessoires spécifiés par le fabricant.
12. Utiliser uniquement avec un charriot, stand, trépied ou une table spécifiée par le fabricant, ou vendus avec l'appareil.
13. Débranchez l'appareil durant un orage ou lorsqu'il reste inutilisé pendant de longues périodes de temps.
14. Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de quelque façon que ce soit;
comme lorsque le cordon d'alimentation ou la fiche est endommagé, lorsque du liquide a été renversé ou des objets sont tombés à l'intérieur, lorsque
l'appareil a été exposé à la pluie ou l'humidité, ne fonctionne pas normalement, ou est tombé.
AVERTISSEMENT:
• Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l'humidité et ne placez pas d’objets contenant
des liquides, tels que des vases, sur l’appareil.
• Pour isoler totalement cet appareil de l'alimentation secteur, débranchez totalement son cordon d'alimentation du réceptacle CA.
• La prise du cordon d’alimentation ou du prolongateur, si vous en utilisez un comme dispositif de débranchement, doit rester facilement accessible
CAUTION
TO PREVENT ELECTRIC SHOCK HAZARD,
DO NOT CONNECT TO MAINS POWER SUPPLY
WHILE GRILLE IS REMOVED.
AVIS
POUR PRÉVENIR LES RISQUES D'ÉLECTROCUTION,
NE PAS RACCORDER A L’ALIMENTATION ÉLECTRIQUE ALORS
QUE LA GRILLE EST RETIRÉE.
The DO NOT STACK symbol is intended to alert the user that the product shall not be
vertically stacked because of the nature of the product.
La symbole NE PAS EMPILER est pour alerter l'utilisateur que le produit ne doit pas être
empilé verticalement en raison de la nature du produit. NOT TO BE SERVICED
BY USERS
CAUTION: HOT SURFACE
ATTENTION: SURFACE CHAUDE
IEC 60417-5041
Off Off
1 2
Lamp Color
Brightness
Min Max
2X
BATTERY
CONSERVE
Audio IN
Channel
Assign
Pwr
On
Power
Off
FOR CONNECTING TO A
YORKVILLE CONTROLLER
• DO NOT CONNECT TO DMX •
INOUT Ch 1,2
Ch 3,4
SEE OWNERS MANUAL FOR
CASCADE INSTALLATION
100-240V 2.0-0.7A 50/60 Hz 100-240V 6.0-2.8A
600W MAX on first outlet
8.0-3.4A 800W MAX WITH AC OUTLET
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
LP-LED2M A-Z1826R / 1v0
Serial Number BluetoothTM
SMART
Battery Powered
Stage Lighting Lightbar
LP-LED2M
Contains Transmitter Module FCC ID: WAP2011
Contains Transmitter Module ID: 7922A-2011
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
DRY LOCATIONS ONLY
POUR EMPLACEMENTS
SECS SOULEMENT
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
NOT FOR RESIDENTIAL USE
PAS POUR USAGE RÉSIDENTIEL
200W MAX STANDALONE
DMX OUTDMX IN
Mode Address
1
2
3
4
5
6
7
8
9
10
11
12
DMX ON
Yorkville
Fully Charged
Charging
Max AC Input Voltage 100-240VAC 50/60 Hz
Power Consumption LEDs 14 watts per LED (4 LEDs, 56 watts per pod)
Power Consumption 200VA, 1.7A @ 120VAC Nominal
Stand Mount Size 1 3/8 inch Round
Controller Cable Yorkville: Standard Shielded 3-pin XLR Cable
Other DMX: Standard Shielded 3-pin XLR Cable
Dimensions (LWH) 27 x 4.8 x 11.1 inches (68.6 x 12.25 x 28.2 cm)
Weight 22.5 lbs (10.2 kg)
Specifications subject to change without notice
Specifications
Spécifications
Tension CA d’entrée Maximum 100-240VCA 50/60 Hz
Consommation de Puissance des DEL 14 watts par DEL, 4 DEL par unité, 56 watts total
Consommation de Puissance des DEL 200VA, 1.7A @ 120VAC Nominal
Taille montage sur support 1 pouce 3/8, Rond
Câble de raccordement pour contrôleur Câble Blindé Standard avec prise XLR 3 tiges
Autre Câble XLR 3 broches blindé standard
Dimensions (LPH) 27 x 4.8 x 11.1 pouce (68.6 x 12.25 x 28.2 cm)
Poids 22.5 lbs (10.2 kg)
Spécifications sujettes à changement sans préavis
M1489 07 Parts Reference List 11/9/2021
REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description
AI-ASS M1489-59 LP-LED BATTERY CHANGE/MONITOR PCB D200 6657 B160-E3 60V 1A0 SCH DO214AC SMT R56 5067 W125 31K6 0.1% 0805 SMT RES
C1 5979 100N 50V 5%CAP 0805 SMT X7R D201 7655 BZT52C6V2 6V2 0W5 SOD123 SMT ZEN R57 8149 W125 36K0 1% 0805 SMT RES
C2 5979 100N 50V 5%CAP 0805 SMT X7R L1 7941 __8.2UH COIL 1210 SMT R58 8149 W125 36K0 1% 0805 SMT RES
C3 5979 100N 50V 5%CAP 0805 SMT X7R L2 8108 120UH COIL 0R4 10MMSQ SMT R59 8149 W125 36K0 1% 0805 SMT RES
C4 5979 100N 50V 5%CAP 0805 SMT X7R L3 7941 __8.2UH COIL 1210 SMT R60 7653 W125 562R 1% 1206 SMT RES
C5 7734 __1U0 50V 10%CAP 1206 SMT CER L4 7732 220.0UH COIL SMT R100 7822 W100 7K50 1% 0805 SMT RES
C6 7601 220N 50V 10%CAP 1206 SMT X7R L5 8101 120.0UH COIL A34 1R6 SMT R101 7685 W125 200K 1% 0805 SMT RES
C7 7601 220N 50V 10%CAP 1206 SMT X7R L100 2916 __6.0UH 10% COIL 13MM SMT R102 5067 W125 31K6 0.1% 0805 SMT RES
C8 7601 220N 50V 10%CAP 1206 SMT X7R L200 2916 __6.0UH 10% COIL 13MM SMT R103 7882 W250 0R 1206 SMT RES
C9 7601 220N 50V 10%CAP 1206 SMT X7R LD1 7036 RD/GN LED 1V7 20MA 0606 SMT R104 7710 W100 9K09 1% 0805 SMT RES
C10 7601 220N 50V 10%CAP 1206 SMT X7R LD2 7031 GRN LED 2V8 20MA 1206 SMT R105 7624 W100 100R 1% 0805 SMT RES
C11 5979 100N 50V 5%CAP 0805 SMT X7R LD3 7031 GRN LED 2V8 20MA 1206 SMT R106 7955 1W00 10R 5% 2512 SMT RES
C12 5979 100N 50V 5%CAP 0805 SMT X7R LD4 7031 GRN LED 2V8 20MA 1206 SMT R109 8004 1W00 0R01 1% CURR SENS SMT RES
C14 7927 100P 50V 10%CAP 0805 SMT NPO LD5 7032 YEL LED 1V7 20MA 1206 SMT R110 7882 W250 0R 1206 SMT RES
C15 6004 _10U 50V 10%CAP 1210 SMT X7R LD6 7033 RED LED 1V5 20MA 1206 SMT R113 8228 W125 75K 1% 0805 SMT RES
C16 6004 _10U 50V 10%CAP 1210 SMT X7R PCB1 M1489BLANK 2_OZ 4LYR 38.69 SQIN 02PER LP-LED2M R114 5162 W250 1M0 0.1% 0805 SMT RES
C17 5979 100N 50V 5%CAP 0805 SMT X7R Q1 7039 STB80N4F6AG NCH MFET D2PAK SMT R115 5159 W125 100K0 0.1% 0805 SMT RES
C18 7927 100P 50V 10%CAP 0805 SMT NPO Q2 7039 STB80N4F6AG NCH MFET D2PAK SMT R117 8004 1W00 0R01 1% CURR SENS SMT RES
C19 6004 _10U 50V 10%CAP 1210 SMT X7R Q3 7039 STB80N4F6AG NCH MFET D2PAK SMT R118 7621 W100 1K0 1% 0805 SMT RES
C20 6004 _10U 50V 10%CAP 1210 SMT X7R Q4 7045 MCB150N06YB NCH MFET D2PAK SMT TR R119 7621 W100 1K0 1% 0805 SMT RES
C21 6004 _10U 50V 10%CAP 1210 SMT X7R Q5 8276 DMN3067LW NCH MFET SOT323 SMT R201 7685 W125 200K 1% 0805 SMT RES
C22 6004 _10U 50V 10%CAP 1210 SMT X7R Q6 7805 MMBT3906LT1 PNP SOT-23 SMT T&R R203 7882 W250 0R 1206 SMT RES
C23 6004 _10U 50V 10%CAP 1210 SMT X7R Q7 7805 MMBT3906LT1 PNP SOT-23 SMT T&R R204 7710 W100 9K09 1% 0805 SMT RES
C24 7601 220N 50V 10%CAP 1206 SMT X7R Q8 7838 MMBT3904 NPN SOT-23 SMT R205 7624 W100 100R 1% 0805 SMT RES
C25 7736 470N 50V 5%CAP 1206 SMT X7R Q9 7046 SIRA01DP PCH MFET 30V TDSON8-1 SMT R206 7955 1W00 10R 5% 2512 SMT RES
C26 7736 470N 50V 5%CAP 1206 SMT X7R Q10 7046 SIRA01DP PCH MFET 30V TDSON8-1 SMT R209 8004 1W00 0R01 1% CURR SENS SMT RES
C27 5979 100N 50V 5%CAP 0805 SMT X7R Q11 7838 MMBT3904 NPN SOT-23 SMT R210 7882 W250 0R 1206 SMT RES
C28 5979 100N 50V 5%CAP 0805 SMT X7R Q100 7986 2N7002 NCH FET SOT-23 SMT T&R R213 8228 W125 75K 1% 0805 SMT RES
C29 5979 100N 50V 5%CAP 0805 SMT X7R Q101 7037 BSC079N03LSC G NCH MFET PDSON8 SMT R214 5162 W250 1M0 0.1% 0805 SMT RES
C30 7734 __1U0 50V 10%CAP 1206 SMT CER Q102 7037 BSC079N03LSC G NCH MFET PDSON8 SMT R215 5159 W125 100K0 0.1% 0805 SMT RES
C31 8088 _10U 16V 10%CAP 0805 SMT X6S Q201 7037 BSC079N03LSC G NCH MFET PDSON8 SMT R217 8004 1W 00 0R01 1% CURR SENS SMT RES
C32 7737 _10N 50V 10%CAP 0805 SMT X7R Q202 7037 BSC079N03LSC G NCH MFET PDSON8 SMT R218 7621 W100 1K0 1% 0805 SMT RES
C33 7734 __1U0 50V 10%CAP 1206 SMT CER R1 7928 W125 10K00 0.1% 0805 SMT RES R219 7621 W100 1K0 1% 0805 SMT RES
C34 5979 100N 50V 5%CAP 0805 SMT X7R R2 8362 W125 200K0 .1% 0805 SMT RES SNL1 8372 1 MIL POLYIMIDE LABEL,.375" X .375"
C35 7927 100P 50V 10%CAP 0805 SMT NPO R3 5067 W125 31K6 0.1% 0805 SMT RES U1 6703 OPA377 SNGL OPAMP IC SMT SOT235
C36 7927 100P 50V 10%CAP 0805 SMT NPO R4 8189 W125 4K02 0.1% 0805 SMT RES U2 6703 OPA377 SNGL OPAMP IC SMT SOT235
C100 7734 __1U0 50V 10%CAP 1206 SMT CER R5 7928 W125 10K00 0.1% 0805 SMT RES U3 6701 CY8C4126AXI MCU 32BT TQFP44 SMT IC
C101 7734 __1U0 50V 10%CAP 1206 SMT CER R6 5067 W125 31K6 0.1% 0805 SMT RES U4 7040 LM74700-Q1 IDEAL DIODE CNTRL SOT236
C102 5979 100N 50V 5%CAP 0805 SMT X7R R7 7928 W125 10K00 0.1% 0805 SMT RES U5 7040 LM74700-Q1 IDEAL DIODE CNTRL SOT236
C103 6004 _10U 50V 10%CAP 1210 SMT X7R R8 8362 W125 200K0 .1% 0805 SMT RES U6 7040 LM74700-Q1 IDEAL DIODE CNTRL SOT236
C104 6004 _10U 50V 10%CAP 1210 SMT X7R R9 5067 W125 31K6 0.1% 0805 SMT RES U7 6644 TPS2491 HS PWR MGR SMT IC VSSOP-10
C105 7734 __1U0 50V 10%CAP 1206 SMT CER R10 8189 W125 4K02 0.1% 0805 SMT RES U8 6705 AP63300WU REG BUCK ADJ 3A SOT236
C106 5979 100N 50V 5%CAP 0805 SMT X7R R11 7928 W125 10K00 0.1% 0805 SMT RES U9 6706 REF4132 LOW V DROP 2V5 REF SOT23-5
C107 6004 _10U 50V 10%CAP 1210 SMT X7R R12 5067 W125 31K6 0.1% 0805 SMT RES U11 6704 INA186A1 CURR SENSE AMP SMT SOT238
C108 6004 _10U 50V 10%CAP 1210 SMT X7R R13 7647 W100 825R 1% 0805 SMT RES U100 6702 BQ24620 BATT CHARGER SMT QFN16
C109 6004 _10U 50V 10%CAP 1210 SMT X7R R14 7653 W125 562R 1% 1206 SMT RES U101 6704 INA186A1 CURR SENSE AMP SMT SOT238
C110 5979 100N 50V 5%CAP 0805 SMT X7R R15 7653 W125 562R 1% 1206 SMT RES U200 6702 BQ24620 BATT CHARGER SMT QFN16
C111 6004 _10U 50V 10%CAP 1210 SMT X7R R16 7653 W125 562R 1% 1206 SMT RES U201 6704 INA186A1 CURR SENSE AMP SMT SOT238
C112 6004 _10U 50V 10%CAP 1210 SMT X7R R17 7653 W125 562R 1% 1206 SMT RES W1 4274 3 CIR HDR RA HI CURR 0.165IN SPC
C113 6004 _10U 50V 10%CAP 1210 SMT X7R R18 7647 W100 825R 1% 0805 SMT RES W2 4274 3 CIR HDR RA HI CURR 0.165IN SPC
C114 6004 _10U 50V 10%CAP 1210 SMT X7R R19 7647 W100 825R 1% 0805 SMT RES W3 4264 2 CIR HDR RA HI CURR 0.224IN SPC
C115 7925 _22P 50V 5%CAP 0805 SMT NPO R20 8189 W125 4K02 0.1% 0805 SMT RES W4 2501 CONN HEADER RT ANGLE PIN 2POS 0.156
C116 8088 _10U 16V 10%CAP 0805 SMT X6S R21 8004 1W00 0R01 1% CURR SENS SMT RES W5 4219 2 PIN HEADER 2MM HORZ SM4 SMT
C117 5979 100N 50V 5%CAP 0805 SMT X7R R22 8004 1W00 0R01 1% CURR SENS SMT RES W6 4269 4 CIR 2X2 HDR RA HI CUR 0.224IN SPC
C200 7734 __1U0 50V 10%CAP 1206 SMT CER R23 7621 W100 1K0 1% 0805 SMT RES W8 4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C201 7734 __1U0 50V 10%CAP 1206 SMT CER R24 7852 W250 10R 5% 1206 SMT RES
C202 5979 100N 50V 5%CAP 0805 SMT X7R R25 7852 W250 10R 5% 1206 SMT RES
C203 6004 _10U 50V 10%CAP 1210 SMT X7R R27 8149 W125 36K0 1% 0805 SMT RES
C204 6004 _10U 50V 10%CAP 1210 SMT X7R R28 7621 W100 1K0 1% 0805 SMT RES
C205 7734 __1U0 50V 10%CAP 1206 SMT CER R29 7852 W250 10R 5% 1206 SMT RES
C206 5979 100N 50V 5%CAP 0805 SMT X7R R30 5068 W125 187K 0.1% 0805 SMT RES
C207 6004 _10U 50V 10%CAP 1210 SMT X7R R31 8149 W125 36K0 1% 0805 SMT RES
C208 6004 _10U 50V 10%CAP 1210 SMT X7R R32 7624 W100 100R 1% 0805 SMT RES
C209 6004 _10U 50V 10%CAP 1210 SMT X7R R33 7624 W100 100R 1% 0805 SMT RES
C210 5979 100N 50V 5%CAP 0805 SMT X7R R34 7864 W125 100K 5% 0805 SMT RES
C211 6004 _10U 50V 10%CAP 1210 SMT X7R R35 7624 W100 100R 1% 0805 SMT RES
C212 6004 _10U 50V 10%CAP 1210 SMT X7R R36 7739 W250 1R 5% 1206 SMT RES
C213 6004 _10U 50V 10%CAP 1210 SMT X7R R37 4970 PTC RESETTABLE 0A2 0R8 1812 SMT
C214 6004 _10U 50V 10%CAP 1210 SMT X7R R38 7632 W100 2K32 1% 0805 SMT RES
C215 7925 _22P 50V 5%CAP 0805 SMT NPO R39 8149 W125 36K0 1% 0805 SMT RES
C216 8088 _10U 16V 10%CAP 0805 SMT X6S R40 7624 W100 100R 1% 0805 SMT RES
C217 5979 100N 50V 5%CAP 0805 SMT X7R R41 7852 W250 10R 5% 1206 SMT RES
D2 6657 B160-E3 60V 1A0 SCH DO214AC SMT R45 7928 W125 10K00 0.1% 0805 SMT RES
D3 7742 B0540 SOD123 SMT SCHTKY R46 8149 W125 36K0 1% 0805 SMT RES
D4 7742 B0540 SOD123 SMT SCHTKY R47 8149 W125 36K0 1% 0805 SMT RES
D5 7742 B0540 SOD123 SMT SCHTKY R51 7624 W100 100R 1% 0805 SMT RES
D6 7742 B0540 SOD123 SMT SCHTKY R52 7621 W100 1K0 1% 0805 SMT RES
D7 7742 B0540 SOD123 SMT SCHTKY R53 7621 W100 1K0 1% 0805 SMT RES
D100 6657 B160-E3 60V 1A0 SCH DO214AC SMT R54 7928 W125 10K00 0.1% 0805 SMT RES
D101
7655 BZT52C6V2 6V2 0W5 SOD123 SMT ZEN R55 8362 W125 200K0 .1% 0805 SMT RES
M1490 03 Parts Reference List 11/9/2021
REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description
AI-ASS M1490-59 LP-LED2M CNTRL BRD J7 3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP R70 7860 W125 4K7 5% 0805 SMT RES
C1 7878 __1U 25V 20%CAP 1206 SMT X7R L1 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R71 7621 W100 1K0 1% 0805 SMT RES
C2 7878 __1U 25V 20%CAP 1206 SMT X7R L3 7754 FERRITE BEAD 1A5 26R SMT 1206 R72 7744 W250 4K7 5% 1206 SMT RES
C3 5979 100N 50V 5%CAP 0805 SMT X7R L4 7754 FERRITE BEAD 1A5 26R SMT 1206 R73 7621 W100 1K0 1% 0805 SMT RES
C4 5979 100N 50V 5%CAP 0805 SMT X7R L5 7754 FERRITE BEAD 1A5 26R SMT 1206 R74 7621 W100 1K0 1% 0805 SMT RES
C5 7602 330P 50V 5%CAP 0805 SMT NPO L6 7941 __8.2UH COIL 1210 SMT R75 7862 W125 20K 5% 0805 SMT RES
C6 7919 680U 6V3 20%CAP 8X10 SMT ELE L7 8152 220UH COIL 10X10MM SMT R76 7928 W125 10K00 0.1% 0805 SMT RES
C7 7811 100U 25V 20%CAP 8X5.4 SMT ELE LD1 7047 GRN LED 2V4 20MA 1206 RA SMT R77 7862 W125 20K 5% 0805 SMT RES
C12 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL MIC1 2386 MIC MEMS ANALOG OMNI M3125 SMT R78 7622 W100 1M0 1% 0805 SMT RES
C16 7693 __1N 50V 5%CAP 0805 SMT NPO P1 4969 ROT GRY 20MM 5BIT ENCODER P31 R79 7624 W100 100R 1% 0805 SMT RES
C17 7693 __1N 50V 5%CAP 0805 SMT NPO P2 4969 ROT GRY 20MM 5BIT ENCODER P31 R80 8011 2W00 680R 1% 2512 SMT RES
C18 7693 __1N 50V 5%CAP 0805 SMT NPO P5 4969 ROT GRY 20MM 5BIT ENCODER P31 R81 7928 W125 10K00 0.1% 0805 SMT RES
C19 7693 __1N 50V 5%CAP 0805 SMT NPO P9 4527 ROT GRY HOR 20MM 4BIT ENCODER P31 R82 8102 W125 3K01 1% 0805 SMT RES
C24 5979 100N 50V 5%CAP 0805 SMT X7R PCB1 M1490BLANK 1_OZ 2SD 85.94 SQIN 2PER LP-LED2M R83 7861 W125 10K 5% 0805 SMT RES
C25 7605 __1N5 50V 5%CAP 0805 SMT NPO Q2 8276 DMN3067LW NCH MFET SOT323 SMT R86 7856 W125 470R 5% 0805 SMT RES
C26 7925 _22P 50V 5%CAP 0805 SMT NPO Q3 7843 MJB42C PNP D2PAK SMT TS R87 7856 W125 470R 5% 0805 SMT RES
C27 7878 __1U 25V 20%CAP 1206 SMT X7R Q4 7805 MMBT3906LT1 PNP SOT-23 SMT T&R R93 7621 W100 1K0 1% 0805 SMT RES
C28 5979 100N 50V 5%CAP 0805 SMT X7R Q5 7838 MMBT3904 NPN SOT-23 SMT S1 4193 SPST SWITCH RA 12POS DIP NO PRINT
C29 7878 __1U 25V 20%CAP 1206 SMT X7R Q6 7838 MMBT3904 NPN SOT-23 SMT S2 3425 DPDT PUSH SW PCMT BREAK B4 MAKE
C30 7875 100N 100V 10%CAP 1206 SMT X7R Q7 7720 TL431A 3 TERM ADJ VREG SMT SOT-23 SNL1 8370 1 MIL POLYIMIDE LABEL, 1" X .380"
C31 7605 __1N5 50V 5%CAP 0805 SMT NPO R1 7849 W250 0R27 5% 1206 SMT RES TP1 8002 TEST POINT MINIATURE SMT
C32 5979 100N 50V 5%CAP 0805 SMT X7R R2 8102 W125 3K01 1% 0805 SMT RES TP2 8002 TEST POINT MINIATURE SMT
C33 7878 __1U 25V 20%CAP 1206 SMT X7R R3 7675 W125 1K21 1% 0805 SMT RES TP3 8002 TEST POINT MINIATURE SMT
C34 7925 _22P 50V 5%CAP 0805 SMT NPO R4 8183 1W00 2R0 1% 2512 SMT RES TP4 8002 TEST POINT MINIATURE SMT
C35 7925 _22P 50V 5%CAP 0805 SMT NPO R5 7833 _47K 5% THERMISTOR NTC 0603 SMT TP5 8002 TEST POINT MINIATURE SMT
C36 7605 __1N5 50V 5%CAP 0805 SMT NPO R6 7676 W100 2K0 1% 0805 SMT RES TP7 8002 TEST POINT MINIATURE SMT
C37 7875 100N 100V 10%CAP 1206 SMT X7R R7 7676 W100 2K0 1% 0805 SMT RES U1 6656 MK10DX128VLL7 72MHZ MCU IC LQFP100
C38 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL R8 7676 W100 2K0 1% 0805 SMT RES U2 7719 MC33063ADR BUCK/BOOST INV IC SO8
C39 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL R10 7902 1W00 1K8 5% 2512 SMT RES U5 7946 TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C40 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL R11 7676 W100 2K0 1% 0805 SMT RES U6 7948 SN74AHC138DR 3TO8 DECOD SMT IC
C41 7693 __1N 50V 5%CAP 0805 SMT NPO R14 7854 W125 47R 5% 0805 SMT RES U7 7946 TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C42 5979 100N 50V 5%CAP 0805 SMT X7R R15 7854 W125 47R 5% 0805 SMT RES U8 7945 50K MAX5414EUD DPOT SMT IC
C43 5979 100N 50V 5%CAP 0805 SMT X7R R16 7621 W100 1K0 1% 0805 SMT RES U9 7661 LM393D DUAL COMPARATOR SMT SO-8
C44 5979 100N 50V 5%CAP 0805 SMT X7R R17 7621 W100 1K0 1% 0805 SMT RES U10 7959 QUAD TRI-STATE BUFFER SMT SOIC14
C45 7878 __1U 25V 20%CAP 1206 SMT X7R R18 7621 W100 1K0 1% 0805 SMT RES U11 6658 RS485/422 RCVR IC SMT SOT23-5
C46 7878 __1U 25V 20%CAP 1206 SMT X7R R19 7676 W100 2K0 1% 0805 SMT RES U13 6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C47 5979 100N 50V 5%CAP 0805 SMT X7R R20 7621 W100 1K0 1% 0805 SMT RES U14 6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C48 7878 __1U 25V 20%CAP 1206 SMT X7R R21 7854 W125 47R 5% 0805 SMT RES U15 6677 SN74LVC1G3157 SPDT SW SMT SOT236
C49 5979 100N 50V 5%CAP 0805 SMT X7R R22 7621 W100 1K0 1% 0805 SMT RES U16 7012 LP2950-33 LDRP TO92 FIXED 3V3 REG
C50 5979 100N 50V 5%CAP 0805 SMT X7R R23 7621 W100 1K0 1% 0805 SMT RES U17 6793 PROC4 BLE MODULE 14X19MM SMT
C51 5979 100N 50V 5%CAP 0805 SMT X7R R25 7856 W125 470R 5% 0805 SMT RES W1 2327 6 CIR XH-HEADER 0.098IN
C52 5979 100N 50V 5%CAP 0805 SMT X7R R26 7856 W125 470R 5% 0805 SMT RES W2 4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C53 5979 100N 50V 5%CAP 0805 SMT X7R R27 5062 FUSE FAST 3A5 125V SMT 2410 W3 2343 6 CIR XH-HEADER RA 0.098IN
C54 7969 _10U 16V 20%CAP 0805 SMT X5R R28 5062 FUSE FAST 3A5 125V SMT 2410 W4 4194 2X2 3 MM MICRO MATE-N-LOK VRT
C55 7969 _10U 16V 20%CAP 0805 SMT X5R R29 7853 W250 100R 5% 1206 SMT RES W5 4194 2X2 3 MM MICRO MATE-N-LOK VRT
C56 7927 100P 50V 10%CAP 0805 SMT NPO R30 7621 W100 1K0 1% 0805 SMT RES W6 2337 4 CIR XH-HEADER 0.098IN
C57 7927 100P 50V 10%CAP 0805 SMT NPO R31 7676 W100 2K0 1% 0805 SMT RES W7 2337 4 CIR XH-HEADER 0.098IN
C59 5979 100N 50V 5%CAP 0805 SMT X7R R32 7676 W100 2K0 1% 0805 SMT RES W9 4269 4 CIR 2X2 HDR RA HI CUR 0.224IN SPC
C60 7693 __1N 50V 5%CAP 0805 SMT NPO R33 7654 W250 619K 1% 1206 SMT RES W10 4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C61 5979 100N 50V 5%CAP 0805 SMT X7R R34 8189 W125 4K02 0.1% 0805 SMT RES
C62 7780 _10U 16V 20%CAP SMT ELC R35 7654 W250 619K 1% 1206 SMT RES
C63 7780 _10U 16V 20%CAP SMT ELC R36 8189 W125 4K02 0.1% 0805 SMT RES
C64 7780 _10U 16V 20%CAP SMT ELC R38 7676 W100 2K0 1% 0805 SMT RES
C65 8088 _10U 16V 10%CAP 0805 SMT X6S R39 6482 115R 20% 0W0 THERMISTOR PTC
C66 8088 _10U 16V 10%CAP 0805 SMT X6S R40 7676 W100 2K0 1% 0805 SMT RES
C67 5979 100N 50V 5%CAP 0805 SMT X7R R41 7853 W250 100R 5% 1206 SMT RES
C68 5979 100N 50V 5%CAP 0805 SMT X7R R42 7853 W250 100R 5% 1206 SMT RES
C69 5979 100N 50V 5%CAP 0805 SMT X7R R43 7853 W250 100R 5% 1206 SMT RES
C70 5979 100N 50V 5%CAP 0805 SMT X7R R44 7861 W125 10K 5% 0805 SMT RES
C71 5979 100N 50V 5%CAP 0805 SMT X7R R45 7624 W100 100R 1% 0805 SMT RES
C72 7737 _10N 50V 10%CAP 0805 SMT X7R R46 7624 W100 100R 1% 0805 SMT RES
C73 5979 100N 50V 5%CAP 0805 SMT X7R R47 7703 W125 82K5 1% 0805 SMT RES
D1 6657 B160-E3 60V 1A0 SCH DO214AC SMT R48 7703 W125 82K5 1% 0805 SMT RES
D2 8080 SMAJ150CA 150V 400W BIDIR SMT R49 7824 W125 47K5 1% 0805 SMT RES
D3 7616 BZX84C6V2 6V2 0W2 SOT-23 SMT ZEN R50 7861 W125 10K 5% 0805 SMT RES
D4 8054 MMSZ15T1G 15V 0W5 5% SMT ZEN R51 7853 W250 100R 5% 1206 SMT RES
D5 6657 B160-E3 60V 1A0 SCH DO214AC SMT R52 7853 W250 100R 5% 1206 SMT RES
D6 7996 SMAZ10-13-F 10V0 1W0 10% SMT ZEN R53 8133 1W00 1K 5% 2512 SMT RES
D7 8080 SMAJ150CA 150V 400W BIDIR SMT R54 8133 1W00 1K 5% 2512 SMT RES
D8 8080 SMAJ150CA 150V 400W BIDIR SMT R55 7853 W250 100R 5% 1206 SMT RES
D9 8054 MMSZ15T1G 15V 0W5 5% SMT ZEN R56 8000 1W00 39R 5% 2512 SMT RES
D10 8054 MMSZ15T1G 15V 0W5 5% SMT ZEN R57 8000 1W00 39R 5% 2512 SMT RES
D11 8054 MMSZ15T1G 15V 0W5 5% SMT ZEN R58 7861 W125 10K 5% 0805 SMT RES
D12 8109 BAV21WS 200V 0A2 SOD323 SMT R59 7861 W125 10K 5% 0805 SMT RES
D13 6657 B160-E3 60V 1A0 SCH DO214AC SMT R64 7861 W125 10K 5% 0805 SMT RES
D14 7750 CDSF4148 75V 0A15 1005 SMT R65 7860 W125 4K7 5% 0805 SMT RES
J1 3918 1/4" JCK PCB MT HORZ SLIM W/SCREW R66 4970 PTC RESETTABLE 0A2 0R8 1812 SMT
J2 3922 XLR FEML PCB MT HORZ THIN SNAP-IN R67 7899 W125 1K800 0.1% 0805 SMT RES
J3 3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP R68 7899 W125 1K800 0.1% 0805 SMT RES
J6
3922 XLR FEML PCB MT HORZ THIN SNAP-IN R69 8011 2W00 680R 1% 2512 SMT RES
M2120 02 Parts Reference List 11/9/2021
REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description
AI-ASS
M2120-59 LP-LED2M POD PCB AI R36 7882 W250 0R 1206 SMT RES
C1
7734 __1U0 50V 10%CAP 1206 SMT CER R37 4970 PTC RESETTABLE 0A2 0R8 1812 SMT
C2
7734 __1U0 50V 10%CAP 1206 SMT CER R38 7882 W250 0R 1206 SMT RES
C3
5979 100N 50V 5%CAP 0805 SMT X7R R39 7882 W250 0R 1206 SMT RES
C4
7734 __1U0 50V 10%CAP 1206 SMT CER R40 7882 W250 0R 1206 SMT RES
C5
5979 100N 50V 5%CAP 0805 SMT X7R R41 7882 W250 0R 1206 SMT RES
C6
7734 __1U0 50V 10%CAP 1206 SMT CER R42 7882 W250 0R 1206 SMT RES
C8
7734 __1U0 50V 10%CAP 1206 SMT CER R43 7882 W250 0R 1206 SMT RES
C9
7736 470N 50V 5%CAP 1206 SMT X7R R44 7882 W250 0R 1206 SMT RES
C10
7736 470N 50V 5%CAP 1206 SMT X7R R45 7882 W250 0R 1206 SMT RES
C11
7693 __1N 50V 5%CAP 0805 SMT NPO R46 7882 W250 0R 1206 SMT RES
C12
5979 100N 50V 5%CAP 0805 SMT X7R R47 7861 W125 10K 5% 0805 SMT RES
C13
7878 __1U 25V 20%CAP 1206 SMT X7R R48 7861 W125 10K 5% 0805 SMT RES
C14
7878 __1U 25V 20%CAP 1206 SMT X7R R49 7861 W125 10K 5% 0805 SMT RES
C16
8105 100N 250V 10%CAP 1206 SMT X7R R50 7861 W125 10K 5% 0805 SMT RES
C17
7878 __1U 25V 20%CAP 1206 SMT X7R R51 7882 W250 0R 1206 SMT RES
C18
7734 __1U0 50V 10%CAP 1206 SMT CER R52 7882 W250 0R 1206 SMT RES
C19
5979 100N 50V 5%CAP 0805 SMT X7R SNL1 8372 1 MIL POLYIMIDE LABEL,.375" X .375"
C20
5979 100N 50V 5%CAP 0805 SMT X7R TP2 8002 TEST POINT MINIATURE SMT
C21
5979 100N 50V 5%CAP 0805 SMT X7R TP3 8002 TEST POINT MINIATURE SMT
C23
7878 __1U 25V 20%CAP 1206 SMT X7R U1 6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
D1
7893 MBRA340T3 40V 3A SHTKY 403D SMT U2 6654 CY8C32 PSOC SSOP48 16KB T&R
D2
6657 B160-E3 60V 1A0 SCH DO214AC SMT U3 6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
D3
7893 MBRA340T3 40V 3A SHTKY 403D SMT U4 6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
D4
7893 MBRA340T3 40V 3A SHTKY 403D SMT U5 6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
D5
7893 MBRA340T3 40V 3A SHTKY 403D SMT U6 8214 MC78L05 REG 5V SMT SO8
D6
7620 MMBZ5227B 3V6 0W35 5% SMT ZEN W1 7994 2X2 3 MM MICRO MATE-N-LOK SMT
D7
7520 BZX84B5V1 5V1 0W2 SOT-23 SMT ZEN W2 4219 2 PIN HEADER 2MM HORZ SM4 SMT
HW2
8826 4-40X3/16 FLAT PHIL U/C TRILOB W3 4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
HW3
8925 #4 INTERNAL TOOTH LOCKWASHER
L1
2926 _0.3UH 20% COIL 3MM5 SMT
L2
2926 _0.3UH 20% COIL 3MM5 SMT
L3
2912 _12UH COIL 4A 0R04 10MMSQ SMT
L4
2912 _12UH COIL 4A 0R04 10MMSQ SMT
L5
2926 _0.3UH 20% COIL 3MM5 SMT
L6
2912 _12UH COIL 4A 0R04 10MMSQ SMT
L7
2912 _12UH COIL 4A 0R04 10MMSQ SMT
L8
7732 220.0UH COIL SMT
L9
2926 _0.3UH 20% COIL 3MM5 SMT
LD1
5919 0A7 RGBW LED EMITTER SMT
LD2
5919 0A7 RGBW LED EMITTER SMT
LD3
5919 0A7 RGBW LED EMITTER SMT
LD4
5919 0A7 RGBW LED EMITTER SMT
PCB1
M2120BLANK 2_OZ 1SD 65.94 SQIN 06PER AL LPL31E
Q1
8276 DMN3067LW NCH MFET SOT323 SMT
R1
7882 W250 0R 1206 SMT RES
R2
5065 W500 0R1 1% 1206 SMT RES
R3
7882 W250 0R 1206 SMT RES
R4
5065 W500 0R1 1% 1206 SMT RES
R5
7882 W250 0R 1206 SMT RES
R6
5065 W500 0R1 1% 1206 SMT RES
R7
7882 W250 0R 1206 SMT RES
R8
7621 W100 1K0 1% 0805 SMT RES
R9
7821 W125 10R0 1% 0805 SMT RES
R10
8133 1W00 1K 5% 2512 SMT RES
R11
7861 W125 10K 5% 0805 SMT RES
R12
7864 W125 100K 5% 0805 SMT RES
R13
7739 W250 1R 5% 1206 SMT RES
R14
7861 W125 10K 5% 0805 SMT RES
R15
7853 W250 100R 5% 1206 SMT RES
R16
7882 W250 0R 1206 SMT RES
R17
7882 W250 0R 1206 SMT RES
R18
7882 W250 0R 1206 SMT RES
R19
7882 W250 0R 1206 SMT RES
R20
7882 W250 0R 1206 SMT RES
R21
7882 W250 0R 1206 SMT RES
R22
7882 W250 0R 1206 SMT RES
R23
5065 W500 0R1 1% 1206 SMT RES
R24
7882 W250 0R 1206 SMT RES
R25
7882 W250 0R 1206 SMT RES
R26
7882 W250 0R 1206 SMT RES
R27
7882 W250 0R 1206 SMT RES
R28
7882 W250 0R 1206 SMT RES
R29
7882 W250 0R 1206 SMT RES
R30
7882 W250 0R 1206 SMT RES
R31
7882 W250 0R 1206 SMT RES
R32
7882 W250 0R 1206 SMT RES
R33
7998 W750 0R 1% 2010 SMT JMP
R34
7882 W250 0R 1206 SMT RES
R35
7834 _10K 5% THERMISTOR NTC 0603 SMT
Battery Charger
Section:
Product(s):
Battery_Charger.SchDoc
M1489 1 2Sheet OfPCB#: Rev#:
Modified: V01
File:
2021-11-30
LP-LED2M EML Rev#: XX
STB80N4F6AG
D2PAK
7039
G
D
S
Q2
SOT23-6
LM74700-Q1
7040
VCAP
1GND
2
EN
3CATHODE 4
GATE
5
ANODE
6
U5
100N
0805
50V
C3
SOT23-5
OPA377
6703
3
4
1
-
+V+
5
V-
2
U1
SGND
220N
1206
50V
C7
SOT23-6
AP63300WU
6705
FB 1
VIN
3
EN
2
GND
4
SW 5
BST 6
U8
W250
10R
1206
R29
10U
1210
50V
C15
10U
1210
50V
C16
100N
0805
50VC17
10U
1210
50V
C19
10U
1210
50V
C20
10U
1210
50V
C21
120UH
8108
L2
W125
187K
0805
R30
W125
36K0
0805
R31
0805
50V100PC18
8200NH
L1
8200NH
L3
10U
1210
50V
C22
GND
+5V Supply Circuit
BSENS_GND
0.1%
W125
10K00
0805
R1 0.1%
W125
200K0
0805
R2
0.1%
W125
31K6
0805
R3
100N
0805
50V
C1
0.1%
W125
31K6
0805
R6
0.1%
W125
4K02
0805
R4
0.1%
W125
10K00
0805
R5
GND
470N
1206
50V
C25
W250
1R0
1206
R36
W100
100R
0805
R35
W125
100K
0805
R34
FGND
FAN
FAN CONNECTOR
FAN CONTROL PIN 38 of U3
2
4219
1W5:1
2
4219
2W5:2
0R8
0A2
R37
SOT323
DMN3067LW
8276
2
1
3S
D
GQ5
DO214AC
B160
D2
PTC FOR SHORTPROTECTION
FGND
TQFP-44
6701
CY8C4126AXI
P0.5 29
P0.6 30
P0.7 31
XRES 32
VCCD 33
VDDD 34
VDDA 35
VSSA 36
P1.0 37
P1.1 38
P1.2 39
P1.3 40
P1.4 41
P1.5 42
P1.6 43
P1.7/VREF 44
P0.3 27
P2.0
2
P4.3 23
P2.4
6
P0.4 28
P2.2
4
P3.3
14
P0.1 25
VSS
1
P3.1
12
P0.0 24
P3.2
13
P2.6
8
P2.3
5
P2.5
7
P2.7
9
P3.0
11
P0.2 26
VSS
10
P2.1
3
P4.1
21
P4.2
22
P4.0
20
P3.4
15
VDDD
19
P3.5
16
P3.6
17
P3.7
18
U3
GRN
90%
7031
LD2
GRN
50%
7031
LD4 GRN
75%
7031
LD3
RED
LOW BATT
7033
LD6 YEL
25%
7032
LD5
NEEDS CHARGING 7036
RED
LD1:1
CHARGED
7036
GRN
LD1:2
825R
W100
0805
R13
W125
562R
1206
R14
W100
825R
0805
R18
W100
825R
0805
R19
W125
562R
1206
R15
W125
562R
1206
R16
W125
562R
1206
R17
BSC079N03LSC G
PDSON-8
7037
G
D
S
Q202
BSC079N03LSC G
PDSON-8
7037
G
D
SQ201
1U
1206
50V
C205
10U
1210
50V
C203
10U
1210
50V
C204
100N
0805
50VC206
100N0805
50V
C210
DO214AC
B160
D200
W125
75K
0805
R213
0.1%
W125
100K0
0805
R215
0.1%
W250
1M00
0805
R214
1W00
10R
2512
R206
1U
1206
50V
C201
QFN16
BQ24620
6702
ISET
7
HIDRV 15
PH 14
CE
2
SRP 10
LODRV 13
TS
4
STAT
3
VCC
1
VREF
6
PG
5
BTST 16
GND/PP
11
VFB 8
SRN 9
REGN 12
U200
10U
1210
50V
C209
13mm
2916
6.0UH
L200
10U
1210
50V
C207
10U
1210
50V
C208
10U
1210
50V
C211
10U
1210
50V
C212
10U
1210
50V
C213
10U
1210
50V
C214
0805 50V22P
C215
SGND
B2_GND
B2_GND
B2_GND
B2_GND
SGND
1U
1206
50V
C200
SGND
W100
9K09
0805
R204
100N
0805
50V
C202
W100
100R
0805
R205
SGND
Charge Circuit for Batt2
Therm In Battery
R208
B2_GNDSGND
SOT23-6
INA186A1
6704
VS
1
GND
4
IN-
8REF 3
IN+
7
OUT 5
EN
2
U201
1W00
0R01
2010
R217
Vref_2V5
Vref_2V5
W100
1K0
0805
R218
W100
1K0
0805
R219
10U0805
16V
C216
Therm_Sense1
Therm_Sense2
Therm_Sense2
BATT1+
BATT2+
BATT1+
BATT2+
B1_GND
B2_GND
BATT2_AMPS
BATT2+
BATT2_AMPS
BATT1_AMPS
BATT1_VOLTS
BATT2_VOLTS
BATT1_VOLTS
BATT2_VOLTS
SGND
BATTERY1
BATTERY2
SOT23-5
OPA377
6703
3
4
1
-
+V+
5
V-
2
U2
BSENS_GND
0.1%
W125
10K00
0805
R7 0.1%
W125
200K0
0805
R8
0.1%
W125
31K6
0805
R9
100N
0805
50V
C2
0.1%
W125
31K6
0805
R12
0.1%
W125
4K02
0805
R10
0.1%
W125
10K00
0805
R11 Vref_2V5
7732
220UH
L4
+5V_CLEAN
W100
100R
0805
R32
W100
100R
0805
R33
10U
1210
50V
C23
220N
1206
50V
C24
SOT23-5
REF4132
6706
NC 1
EN
3
VIN
4
GND
2
VREF 5
U9
Vref_2V5
BATTERY1 STATUS
COMBINER
VREF 2V5
1
2
2
2
W3
FROM PS
+24V
VSTBY
+5V
+5V
1U
1206
50V
C5
STB80N4F6AG
D2PAK
7039
G
D
S
Q1
SOT23-6
LM74700-Q1
7040
VCAP
1GND
2
EN
3CATHODE 4
GATE
5
ANODE
6
U4
SGND
220N
1206
50V
C6
STB80N4F6AG
D2PAK
7039
G
D
S
Q3
SOT23-6
LM74700-Q1
7040
VCAP
1GND
2
EN
3CATHODE 4
GATE
5
ANODE
6
U6
SGND
220N
1206
50V
C8
COMB1
COMB2
MONITOR
BATTERY2 STATUS
MONITOR
220N
1206
50V
C9
220N
1206
50V
C10
STAT_BQ2
CE_BQ
PG_BQ
STAT_BQ2
STAT_BQ1
CE_BQ
PG_BQ
1W00
0R01
2010
R21
1W00
0R01
2010
R22
MCB150N06YB
D2PAK
7045
G
D
S
Q4
VSSOP10
6644
TPS2491
OUT 7
VREF
2
VCC
10
TIMER 4
PROG
3
EN
1
PG 6
GND
5
GATE
8
SENSE
9U7
W250
10R
1206
R24
1K0
W100
0805
R28
0805
50V100P
C14
0805
50V100N
C11
W125
4K02
0805
R20
W100
1K0
0805
R23
SGND SGND
LIGHTS_EN
BSC079N03LSC G
PDSON-8
7037
G
D
S
Q102
BSC079N03LSC G
PDSON-8
7037
G
D
SQ101
1U
1206
50V
C105
10U
1210
50V
C103
10U
1210
50V
C104
100N
0805
50VC106
100N0805
50V
C110
DO214AC
B160
D100
W125
75K
0805
R113
0.1%
W125
100K0
0805
R115
0.1%
W250
1M00
0805
R114
1W00
10R
2512
R106
1U
1206
50V
C101
QFN16
BQ24620
6702
ISET
7
HIDRV 15
PH 14
CE
2
SRP 10
LODRV 13
TS
4
STAT
3
VCC
1
VREF
6
PG
5
BTST 16
GND/PP
11
VFB 8
SRN 9
REGN 12
U100
10U
1210
50V
C109
13mm
2916
6.0UH
L100
10U
1210
50V
C107
10U
1210
50V
C108
10U
1210
50V
C111
10U
1210
50V
C112
10U
1210
50V
C113
10U
1210
50V
C114
50V22P
C115
SGND
B1_GND
B1_GND
B1_GND
B1_GND
SGND
1U
1206
50V
C100
SGND
W100
9K09
0805
R104
100N
0805
50V
C102
W100
100R
0805
R105
SGND
Charge Circuit for Batt1
Therm In Battery
To BATT W1
R108
B1_GNDSGND
SOT23-6
INA186A1
6704
VS
1
GND
4
IN-
8REF 3
IN+
7
OUT 5
EN
2
U101
1W00
0R01
2010
R117
W100
1K0
0805
R118
W100
1K0
0805
R119
10U0805
16V
C116
Vref_2V5
Therm_Sense1
BATT1+
BATT1_AMPS
STAT_BQ1
CE_BQ
PG_BQ
COMB1
COMB2
FAN_CNTRL
FAN_CNTRL
LIGHTS_EN
+24V
SGND
2N7002
7986
SOT-23
G
D
SQ100
DNS
1W00
0R01
2010
R116
DNS
1W00
0R01
2010
R216
1W00
0R01
2010
R109
1W00
0R01
2010
R209
W100
7K50
0805
R100
W125
200K
0805
R101
W125
31K6
0805
R102
SGND
ISET
W125
200K
0805
R201
ISET
470N
1206
50VC26
To Controller Board
Vref_2V5
110 W8:1
210 W8:2
310 W8:3
410 W8:4
510 W8:5
610 W8:6
710 W8:7
810 W8:8
910 W8:9
10 10 W8:10
+5V
TMS/SWDIO
TCLK/SWCLK
TMS/SWDIO
TCLK/SWCLK
PROGRAM HDR
CPU
1
2
2
2
3
2
W1
1
2
2
2
3
2
W2
B2_GND
B1_GND
V OUT
SG1
100N
0805
50VC12
W250
10R
1206
R25
VSTBY
CPUGND
CPUGND
CPUGND
CPUGND
CPUGND
CPUGND
CPUGND
VOUT
SOD123
B0540
D3
W100
2K32
0805
R38
W125
36K0
0805
R27
SOT23
MMBT3906LT1
7805
Q6
+5V
SOD123
B0540
D4
W100
100R
0805
R40
W125
36K0
0805
R39
SOT23
MMBT3906LT1
7805
Q7
+5V
UART_OUT
SGND
CHRG_STATUS
CHRG_STATUS
+5V_CLEAN
+5V_CLEAN
SOD123
B0540
D6
SOD123
B0540
D5
W250
10R
1206
R41
+24V
CPUGND
CPUGND
0.1%
W125
10K00 0805
R45 +5V
XRES
W125
36K0
0805
R46
100N
0805
50V
C28
W125
36K0
0805
R47 SOT-23
MMBT3904
7838
Q8
CPUGND
UART_OUT
UART_IN XRES
100N
0805
50V
C29
CPUGND
100N
0805
50V
C4
CPUGND
+5V
TP2
TP1
TESTUART OUT
TESTDAC1 OUT
1U
1206
50V
C30
N1
4 PIN4269
1
2
3
4
W6
1
2W4:1
2
2W4:2
R48
SGND
B1_GND
B2_GND
SOD123
6V2
D101
5VCL_EN
SOD123
6V2
D201
SGND
SGND
To BATT W2
5VCL_EN
+5V_CLEAN
+5V_CLEAN
B2_GND
B1_GND
BSENS_GND
BSENS_GND
BSENS_GND
SOD123
B0540
D7
CPUGND
5V CLEAN
R43
SGND
DNS
SOT23-5
SDA
3
SCL
1
VSS
2
VCC 4
CAT24C02
6714
WP 5
U10
+5V
DNS
W125
4K02
0805
R44
DNS
W125
4K02
0805
R49
CPUGND
+5V
ON/OFF
TP3
DNS
W125
0R0
0805
R50
100N0805
50V
C217
B2_GND
100N0805
50V
C117
B1_GND
CON_HOLE_140
1
GH1
B1_GND
CON_HOLE_140
1
GH2
B2_GND
W250
0R
1206
R103
W250
0R
1206
R110
W250
0R
1206
R203
W250
0R
1206
R210
W100
100R
0805
R51
BSENS_GND
BSENS_GND
120uH
8101
L5
N2
N3
N4
N5
SOT23-6
INA186A1
6704
VS
1
GND
4
IN-
8REF 3
IN+
7
OUT 5
EN
2
U11
Vref_2V5
+5V_CLEAN
100N0805
50V
C27
AMPS_TO_LIGHTS
AMPS_TO_LIGHTS
SGND
SGND
W100
1K0
0805
R52
W100
1K0
0805
R53
10U
0805
16V
C31
CON_HOLE_140
1
GH3
CON_HOLE_140
1
GH4CPUGND
SGND
0.1%
W125
10K00
0805
R54
10N
0805
50V
C32 +5V
N9
N8
N6
N7
N10
N15
N16
N14
N13
N11
N12
N18
N17
N24
N25
N23
N20
N19
N21
N22
SIRA01DP
7046
TDSON8-1
GS
D
Q9
SIRA01DP
7046
TDSON8-1
GS
D
Q10
W125
200K0
0805
R55
SGND
W125
31K6
0805
R56
1U
1206
50V
C33
100N
0805
50VC34
W125
36K0
0805
R57 W125
36K0
0805
R58
SOT-23
MMBT3904
7838
Q11
W125
36K0
0805
R59
PS_CONNECT_CNTL
24V_MON
24V_MON
PS_CONNECT_CNTL
+24VSW
+24VSW
+24VSW
+24VSW
SGND
0805
50V 100P
C35
0805
50V 100P
C36
W125
562R
1206
R60
N26
LIGHTS POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1489 2 2Sheet OfPCB#: Rev#:
Modified:
V01
File:2021-11-30
LP-LED2M EML Rev#: XX
Tmp Rev: V032
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASE FOR PRODUCTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26-OCT-2021
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT/SW YS#FUNCTION KNOB#
POTENTIOMETERS/SWITCHES AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
STYLE
.
.
.
.
.
.
.
.
.
.
.
.
.
1
G
D
19
G
S G
2
1
R
D
210
TEST
TEST
S
1
C1
Q6
C4
D3
U9
D6
1
1
C26
R37
C35
R57 1C28
R55 R59
R53 C27
U3
C2
R4
C12
R3 R1
R7
R38
W8
U10
R39
L3 C15 C20
U8
C104
R106
C106
R214 C210
R213 C114
LOW BATT
R21
C24 C30
C21
R203
D200
C215
C116
C109
L200
R109
D201
D101
Q10
Q11
Q5
R36
R46
Q9
R12
U1
N4
C5
LD6
R9
LD5
TP3
TUARTO
LD4
TP2
L5
Q3
Q2
Q1
L1
R206
C203
C
R102
C17
L2
C200
2021
C100
R204
R101
C214
R110
C212
R118
R217
C211
FAN
TJH1
R60
D2
C34 C36 LD1
R52
C31
R58
U2
R11
N3
R5
C3
R54C29
R13
R51
Q4
R24
R28
R10
N5
R18
U7
R20
R23
R8
R27
R33
R32
R2
N1
R25 TP1
R17
R22
R50
C23
R40
Q7
R49
R16
R44
R15
C10
C9
Q100
R30
C18
C8
C204
C207
C6
R41
C16
R31
C107
R205
C202
C201
C206
Q202
C101
C108
R215
R201
C205
Q201
R210
R114
R113
C115C110
D100
U201
C209
C113 C112
R219
R216
R119
L100 C111
W2
W1
TJH2
W3
L4
LIGHTS
ON/OFF R47
R35
R34
R6
25%
75%
90%
C22
D4
R29
C19
U200 U100
C216
R115
C117
W6
NEEDS CHRG
R56
R45
C32
C14
D7
DAC1
LD3 LD2
U6
U5
U4
C208
R105
C102
D5
C103
Q102 Q101
R218 R209
C213
1
ESD
U11
C33
W4
W5
LABEL
S/N
Q8
R19
R14
C11
UART
N2
C7
Yorkville
R104
R100
C105
C217
U101
R117
C25
FROM PS
M1489 V01
50%
R103
R116
To CNTRL
To BATT
To BATT
LP-LED2M
4264 2501
4269 4274
4274
SF
1U
100N 100N
31K6 31K6
200K0 10K00
100N
24SD
8200NH
8200NH
M747
0R 0R
1U
22P
100N 0R 22P
100N
10U
10U
WA
WA
470N
36K0
100N
1U
1K0
1K0 RED
825R
31K6
4K02
4K02 YEL
TPS2491
4183
DNS
SF 562R
STB80N4F6AG
079N03LS
100K0
1M00
75K 10U
1ZLW 10U
1ZLW
1K0
STB80N4F6AG STB80N4F6AG
N30
K1N
10U
K1N
100N TP
SF
DNS
SF
220N
T6
187K
100P
C
100N
10R
2021
10R
10U
10U
B16
100R
6.0UH
0R01
0A2
B16
200K0
100P
100P
100R
100K
36K0
1ZLW
36K0 36K0
TP
TP
10R 1K0
100P
PAG
PAG
10R
100N
1K0
4K02
10K00
100R
100R
DNS
1U
DNS
10U
10U
2A
DNS
36K0 DNS
220N
12
220N
100N
1U
10U
10U
9K09
200K
BQ24620
200K
B16
100N
079N03LS
SER1360-602L 1M00
75K
1K0
10U
DNS
10U
100N
100R
100N
825R
BIX 2A GRN
36K0
562R
GRN
GRN
562R
10R
100K0
SER1360-602L
0R
100N
10U 10U
10U
10U
1K0 100N
4219
MCB150N06YB
RA01
TESTJIGHOLE
RA01
100N
31K6
1R0 10K00
10K00
10N
825R
562R
200K0
100R 10U
10U
DNS
TP
10U
1U
OAR
10U
31K6
7K50
BQ24620
10R
1U
120UH
1K0
0R01
10U
10U
TESTJIGHOLE
562R 1U
470N
31K6
220UH
36K0
10K00
10K00
0R01
100N
220N
10U
120uH
100R
M747 100N
10U
10U
079N03LS
220N
Yorkville
M747
9K09
10U
220N
OAR
SF
100N
1U
10U
079N03LS
36K0
121
6.0UH
0R01
DNS
80N4F6 80N4F6
2K32
0R01
0R01
80N4F6
CY8C4126AXI
124
M1489V01 LP-LED2M
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Assembly.SchDoc
M1489 1 *Sheet OfPCB#: Rev#:
Modified:
V01
File:
2021-11-30
LP-LED2M EML Rev#: XX
Tmp Rev: V032
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.
PCB HARDWARE
1.Use pizza cutter to separate panel and appropriate tool for connector ends.
SPECIAL PRODUCTION NOTES
PCB ASSEMBLY DOCUMENTATION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1489 2 2Sheet OfPCB#: Rev#:
Modified:
V01
File:
2021-11-30
LP-LED2M EML Rev#: XX
Tmp Rev: V032
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASE FOR PRODUCTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26-OCT-2021
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT/SW YS#FUNCTION KNOB#
POTENTIOMETERS/SWITCHES AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
STYLE
.
.
.
.
.
.
.
.
.
.
.
.
.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Product(s):
M1490 1 *Sheet OfPCB#: Rev#: V01
Short Description Of The ProductDescription: LP-LED2M
Yorkville Sound Ltd.
550 Granite Court
Pickering, ON
Canada L1W 3Y8
www.yorkville.com EML Rev#: XX
DSP-LP-LEDX2.SchDocModified: File:2021-11-01 Tmp Rev: V031
LQFP-100
6656
MK10DX128VLL7
PTC10 82
PTE0/UART1_TX
1
PTC18 92
ADC0_DP1
14
PTB21 67
PTB20 66
PTC17 91
PTA3/JTAG_TMS/SWD_DIO
37
PTC9 81
PTA0/JTAG_TCLK/SWD_CLK
34
PTE2/SPI1_SCK
3
VBAT
30 EXTAL32
29 XTAL32
28 DAC0_OUT
27
PTB2 55
VDD
8
PTD5 98
PTB17 63
PTD3 96
PTC0 70
VREFH
23 VDDA
22
PTC13 85
PTC11 83
PTC6 78
PTC7 79
PTC14 86
PTC12 84
VSS 88
PTD1 94
VDD 89
PTC16 90
PTC4 76
VDD 75
VSS 74
PTC1 71
PTC3 73
VSS
49 VDD
48
PTA19 51
PTA18
50
PTB1 54
PTB0 53
PTA14
44
PTA15
45
ADC1_DP1
16
PGA1_DP
20
PGA1_DM
21
PGA0_DM
19 PGA0_DP
18
VDD 61
PTB16 62
PTA12
42
PTE19
13
PTE4
5
PTB10/UART3_RX 58
PTB11/SPI1_SCK/UART3_TX 59
PTB18 64
PTB3 56
PTB22 68
PTB23 69
VDD
40
VSS
41
PTE18
12
VSS
9
PTE16/UART2_TX
10
PTD6 99
PTE26
33 PTE25/UART4_RX
32
VREF_OUT
26
PTE24/UART4_TX
31
PTE3
4
PTE6
7
PTD4 97
PTD2 95
PTC5 77
PTC8 80
PTC2 72
PTC15 87
PTD0 93
PTA16
46
RESET_b 52
PTA17
47
PTA13
43
VSSA
25
ADC0_DM1
15
VREFL
24
PTA2/UART0_TX
36
PTE1/SPI1_SOUT/UART1_RX
2
ADC1_DM1
17
PTE5
6
VSS 60
PTA1/UART0_RX
35
PTB19 65
PTB9/SPI1_PCS1 57
PTE17/UART2_RX
11
PTA5
39 PTA4
38
PTD7 100
U1
6
2
3
5
1
4
COM
ROT
.
4969
P1
6
2
3
5
1
4
COM
ROT
.
4969
P5 25V
1206
1U
C1
+3V3
DGGND
ROT
.
4969
6
2
3
5
1
4
COM
P2
1206
25V1U
C2 100N
0805
50V
C3
+3V3
DGGND
+3V3BLU
DGNDBLU
1206
25V 1U
C27 1206
25V 1U
C33
100N 0805
50V C28
100N
0805
50V
C32
UART3_RX
UART3_TX
1206
25V 1U
C29
W125
47R
0805
R14
W125
47R
0805
R15
10
1W2:1
2
10W2:2
310 W2:3
4
10W2:4
510 W2:5 6
10W2:6
710 W2:7 8
10W2:8
910 W2:9
10
10
W2:10
+3V3BLU
DGNDBLU
BLUETOOTH PROGRAM
HEADER
12 POS DIP SW
4193
21
43
65
87
109
1211
1413
1615
1817
2019
2221
2423
1
2
3
4
5
6
7
8
9
10
11
12
S1
DGGND
DGGND
CH #1 CH #2
FUNCTION
50V
100N
0805
C42
+3V3
DGGND
50V 100N
0805
C43
+3V3
DGGND
1206 25V1U C48
SO8
MC33063A
7719
INV
5
ISEN
7DRV_C
8
SW_E 2
SW_C 1
VCC
6
TCAP 3
GND
4
U2
0805
50V
330P
C5
ELE 8mm
25V100U
C7
ELE 8mm
6V3680U
C6
W125
3K01
0805
R2
W125
1K21
0805
R3
W250
0R27
1206
R1
220UH
8152
L7
GND
GND
GND GND
+3.3V SUPPLY
STEP DOWN
CONVERTER
+24V
FOR U1 DSP
50V
100N 0805
C44
+3V3
DGGND
1206
25V1U
C45
50V
100N 0805
C47
+3V3
DGGND
1206
25V1U
C46
2
10W10:2
310 W10:3 4
10W10:4
510 W10:5 6
10W10:6
710 W10:7 8
10W10:8
910 W10:9 10
10W10:10
110 W10:1
FROM XLR CONTROL
HEADER
UART0_RX UART0_TX
ANALOG AUDIO
SPI1_SOUT SPI1_SCK
UART1_TX
TO DEMULTIPLEXER
UART0_TX
UART0_RX
SPI1_PCS1
TO DIGITAL POT U8
SPI1_PCS1
TO DIGITAL POT U9 SPI1_SOUT SPI1_SCK
PROGRAM
+3V3
DGGND
UART2_RX UART2_RX
FROM DMX INPUTS PTB19 PTB18
PTB19 PTB18
TO DEMULTIPLEXER
8200NH
L6
100N
0805
50V
C4
100N
10U
0805
10V
C54
+3V3 +3V3ANALOG
AGNDM
+3V3ANALOG
DGGND
+3V3
DGGND
LED LEVEL
EXTERIA STATE SENCE
66
W3:6
65
W3:5
63
W3:3
64
W3:4
+3V3 +3V3BT
DGGND DGNDBLU
GRN
7047
.
LD1
W250
100R
1206
R55
+3V3
DGGND
POWER LED
CON_HOLE_125
1
HC2
CON_HOLE_125
1
HC1
DGGND GND
DGGND
DGGNDGND
GND AGNDM
ROT H 4527
0
1
2
COM
3
.
P9
TP1
TP2
TP PIN13
GND
+3V3
NetU1_31
NetU1_32
10U
Elec
16V
C62
FTM1_CH0
BLU_TX
BLU_RX
BLU_RESET
+3V3BT
F0805600R
L1
66W1:6
56W1:5
36W1:3
46W1:4
TO92
LP2950-33
7012
IN
GND
OUT
U16
GND
50V
100N
0805
C71
+3V3
TP5
GND TEST PT
TO START
PCB TESTING
DGGND
PIN 54 GROUNDED
TO ENABLE LP-LED2X
W125
47R
0805
R21
10U
0805
10V
C55
DPDT PUSH
3425
S2:1
3425
DPDT PUSH
3425
S2:2
3425
DGGND
CON_HOLE_125
1
HC3
GND
DO214AC
B160
D1
GND
27
GND
26
GND
25
P0.6
24 P0.7
23 P0.5
22
P0.4
21
P2.3 12
VDD
15
P1.7
16
VREF
10
P2.6 9
P3.2 8
P3.3 7
P2.0 14
P1.4
19
P2.2 13
P2.4 11
P1.6
17 P1.5
18
GND
28
VDDR
29
P3.4 6
P3.5 5
P5.1 31
P1.0
20
XRES
1
P5.0 30
P3.6 4
P3.7 3
P4.0 2
14X19mm SMT Module
CYBLE-012011-00
6793
U17
N1
N3
N5
N7
N2
N4
N6
N8
N11
SWD_CLK
SWD_DIO
RESET
DGGND DGGND
CHRG_STAT
CHRG_STAT
FROM INPUTS PS
FROM INPUTS PS
AN0 AN1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
*
Section:
Product(s):
INPUT-OUTPUT-X2.SchDoc
M1490 * *Sheet OfPCB#: Rev#:
Modified:
V01
File:2021-11-01
LP-LED2M EML Rev#: XX
Tmp Rev: V031
2
6
1
3
5
4
S TR
-
-- .
3918
1/4in JCK
J1
.
XLR FEMALE
3922
J2:1
4
.XLR FEMALE
3922
J2:2
.
XLR FEMALE
3922
J6:1
.
XLR FEMALE
3922
4
J6:2
XLR MALE
.
3923
J3
XLR MALE
.
3923
J7
14W4:1
24W4:2
34W4:3
44W4:4
1K0
W100
0805
R16
1K0
W100
0805
R17 W100
2K0
0805
R11
1N
0805
50V
C16
1N
0805
50V
C17
SO14
TLV2474
7946
V+
4
V-
11
U5:5
SOIC-D
SN74AHC138
7948
VCC 16
G2B
5
Y6 9
Y4 11
B
2
Y2 13
Y0 15
Y5 10
Y3 12
Y1 14
Y7 7
A
1
C
3
G2A
4
G1
6
GND
8
U6
POD#1
GND
14W5:1
1K0
W100
0805
R20
1K0
W100
0805
R18 W100
2K0
0805
R19
1N
0805
50V
C19
1N
0805
50V
C18
POD#2
GND
24W5:2
34W5:3
44W5:4
DGGND
+3V3
+3V3
GND
SO14
TLV2474
7946
-
9
+
10
8
U5:3
SO14
TLV2474
7946
-
13
+
12
14
U5:4
+3V3
DGGND
DGGND
+24V
GND
100N
0805
50V
C24 YS/4194
4POS 3MM HEADER
YS/4269
SO14
TLV2474
7946
-
2
+
3
1
U7:1
SO14
TLV2474
7946
-
6
+
5
7
U7:2
SO14
TLV2474
7946
-
9
+
10
8
U7:3
SO14
TLV2474
7946
-
13
+
12
14
U7:4
SO14
TLV2474
7946
V+
4
V-
11
U7:5
1206
100V100N
C30
1206
100V100N
C37
6x6mm
25V33U
C40
0805
50V22P
C26
0805
50V22P
C35
W250
619K
1206
R33
W250
619K
1206
R35
W125
4K02
0805
R34
W125
4K02
0805
R36 W100
2K0
0805
R38
W100
2K0
0805
R40
W250
100R
1206
R41
W250
100R
1206
R42
W250
100R
1206
R43
PTC
20%
R39
6482
AGND
AUDIO IN
GND
1
CS 7
WB
4
DIN 8
WA
12
SCLK 9
HA
13
LA
14
HB
3
LB
2
VDD
11
TSSOP-14
7945
MAX5414EUD
U8:1
TSSOP-14
N.C.3 10
N.C.2 6
N.C.1 5
7945
MAX5414EUD
U8:2
+3V3
AGND
6x6mm
25V33U
C38
6x6mm
25V33U
C39
AGND
SPI1_SOUT
SPI1_SOUT
+3V3
AGND
SPI1_SCK
SPI1_PCS1
SPI1_SCK
SPI1_PCS1 0805
50V 22P
C34
W100
2K0
0805
R31 W100
2K0
0805
R32
1N5
0805
50V
C31
1N50805
50V
C25
1K0
W100
0805
R30
1N5
0805
50V
C36
AGND
W250
100R
1206
R29
AGND
+3V3
DO214AC
B160
D5
DO-214AC
10V0
D6
1N
0805
50V
C41
2W00
680R
2512
R80
2W00
680R
2512
R69
W125
10K
0805
R44
W125
4K7
0805
R70 W125
47K5
0805
R49
1K0
W100
0805
R93
W125
10K
0805
R50
+24V
+3V3
DGGND
AGND
1
3
2
+
-
SO8
LM393D
7661
U9:1
V+
8
V-
4
SO8
LM393D
7661
U9:3
UART0_RX
DGGND
1206
FERR BEAD
L4
1206
FERR BEAD
L5
1W00
39R
2512
R56
1206
FERRBEAD
L3 W250
100R
1206
R51 23
1OE
1
SOIC14
SN74LVTH125
7959
U10:1
56
2OE
4
SOIC14
SN74LVTH125
7959
U10:2
98
3OE
10
SOIC14
SN74LVTH125
7959
U10:3
1211
4OE
13
SOIC14
SN74LVTH125
7959
U10:4
SO14
SN74LVTH125
7959
GND
7
Vcc
14
U10:5
DGGND
DGGND
UART0_TX
+24V
DGGND
+3V3
DGGND
DGGND
FROM CONTROLLER
W250
100R
1206
R52
UART2_RX
DGGNDX
DGGNDX
+3V3X
1W00
1K
2512
R53
1W00
1K
2512
R54
DMX
FROM
LINK
LINK
100N
0805
50V
C49
100N
0805
50V
C68 100N
0805
50V
C67
SOT323
DMN3067LW
8276
2
1
3
S
D
G
Q2
SOT23-5
RO
VCC
GND
B
MAX3280E
6658
A
U11
UART1_TX
PIN 1 OF MICRO
UART0_TX
UART0_RX
UART2_RX
PTB19 PTB19
PTB18 PTB18
FROM MICRO U1
82K5
W125
0805
R47
0805
50V
100P
C56
0805
50V
100P
C57
82K5
W125
0805
R48
PIN 2
PIN 3
PIN 1
PIN 2
PIN 3
PIN 1
PIN 2
PIN 3
PIN 1
PIN 2
PIN 3
PIN 1
112kHz
EXTERIA STATE SENCE
100N
0805
50V
C50
AGND
DGGND GNDAGND
GROUND TIES
100N
0805
50V
C61
100N
0805
50V
C59
+3V3X
DGGNDX
1N
0805
50V
C60
DGGNDX
1W00
39R
2512
R57
0R8
0A2
R66
TP3
TP4
AGND
DO-214ACBI
SMAJ150CA
D2
DO-214ACBI
SMAJ150CA
D7
1K0
W100
0805
R71
1K0
W100
0805
R73
W250
4K7
1206
R72
AGND
SPRKGAP
SG2
SPRKGAP
SG1
SPRKGAP
SG4
SPRKGAP
SG3
SPRKGAP
SG5
SPRKGAP
SG7
SPRKGAP
SG6
DGGND
100N
0805
50V
C53
DO-214ACBI
SMAJ150CA
D8
W125
10K00
0805
R81
SO8
TLV2316
6679
3
2
1
+
-
U14:1
SO8
TLV2316
6679
5
6
7+
-
U13:2
SO8
TLV2316
6679
V-
4
V+
8U14:3
W125
10K00
0805
R76
W125
20K
0805
R77
W125
20K
0805
R75
AGND
10U
4X4mm
16V
C63
+3V3
+3V3
AGND AGND
W100
1M0
0805
R78
10U
4X4mm
16V
C64
M3125
2386
2
1
4
3
MIC1
0805
16V10U
C65
100N
0805
50V
C73
MICGND
+3V3BT MIC+3V3
SO8
TLV2316
6679
V-
4
V+
8
U13:3
SOT23-6
B2 1
B1
3
GND
2
A
4
VCC
5
S
6
SPDT
6677
U15
AGND
AGND
+3V3
SO8
TLV2316
6679
3
2
1+
-
U13:1
MIC2+3V3
MICGND
1K0
W100
0805
R74
62
W3:2
6
1W3:1
2
6W1:2
16W1:1
W100
100R
0805
R79
W100
100R
0805
R45
0805
16V10U
C66
W100
2K0
0805
R7
W100
2K0
0805
R8
1K0
W100
0805
R22
1K0
W100
0805
R23
MICGND
MIC2+3V3
100N 0805
50V C52
MICGND
100N 0805
50V
C69 100N
0805
50V
C70
AGND
+3V3 +3V3
W125
470R
0805
R86
W125
470R
0805
R87
+3V3
+3V3
3A5
5062
R27
3A5
5062
R28
MICGNDDGNDBLU
ON LITTLE BREAKAWAY
MICGND
W100
100R
0805
R46 100N080550V
C51
10N0805
50V
C72
SOD-323
200V
D12
4
1W7:1
4
2W6:2
43
W7:3
44
W7:4
42
W7:2
43
W6:3
44
W6:4
41
W6:1
DGGNDX
+3V3
DGGND
+3V3X
GND
DGGND
N13
N12
N15
N16
N14
N17
N18
N20
N21
N22
N23
N19
N24
N25
SO8
LM393D
7661
7
5
6
+
-
U9:2
GND
+24V
MJB42C
D2PAK 7843
Q3
SOT23
MMBT3906LT1
7805
Q4
W125
10K
0805
R58
W125
10K
0805
R64
W125
10K
0805
R59
47K
W063
R5
W100
2K0
0805
R6
1W00
2R0
2512
R4
1W00
1K8
2512
R10
SOT-23
MMBT3904
7838
Q5
SOT-23
6V2
D3
DO214AC
B160
D13
6x6mm
25V33U
C12
SOD-123
MMSZ15T1G
15V0
D4
15V0
SOD-123
MMSZ15T1G
D9
SOD-123
MMSZ15T1G
15V0
D11
15V0
SOD-123
MMSZ15T1G
D10
DGGNDX
W125
470R
0805
R25
W125
470R
0805
R26
4 PIN 4269
1
2
3
4
W9
From Bat Chg PCB
W125
1K800
0805
R67
SOT-23
MMBT3904
7838
Q6
W125
4K7
0805
R65
+3V3
DGGND
D1005
CDSF4148
D14
CHRG_STAT
SEE DSP PINS 32/73
W125
1K800
0805
R68
SOT23
TL431A
2V5
7720
Q7
3K01
W125
0805
R82
W125
10K
0805
R83
AN0
AN1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1490 1 *Sheet OfPCB#: Rev#:
Modified:
V01
File:2021-11-01
LP-LED2M EML Rev#: XX
Tmp Rev: V031
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASE FOR PRODUCTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26-OCT-2021
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
S2
P5
P1
P2
86363425
4969
4969
4969
4527
.
.
.
.
.
.
.
9029
9029
9029
9029
.
.
.
.
.
.
.
BLUETOOTH
REF POT/SW YS#FUNCTION KNOB#
POTENTIOMETERS/SWITCHES AND KNOBS
FUNCTION
BRIGHTNESS
.
.
.
.
.
.
.
CH2
CH1
.. .
P9
.
.
.
.
.
.
.
.
STYLE
.
P31
P31
P31
P31
.
.
.
.
.
.
.
.
6
16
TP
+
1
2
4
1
2
2
1
7
+
+
TP
TIP-SW
4
1
+
+
+
+
2
1
SL-SW
SLEEVE
RING
TIP
+
TP
TP
+
TP
RING-SW
+
+
+
D1
+
D9
Q7
1
R76
+
R72
R39
R36
TP5
24
R65
R43
R68
R67
2
1
+
1
R3
R87
R6
R16
C37
M1490 V01
C31
C71
U13
LD1
U14
C51
R7
C66
R75 C63
1
R47
C57
R33
R48
C33
R74
R41
+
R38
U7
C49
C46
P1
C34
C39
C54
C4
C50
+
D14
P2
U16
TP1
R4
P9
D10
R26
D11
R11
C19
.
U9
1
R93
J3
R51
C52
R55
D8
W 3
R23
R79 C29
R77
2021
Yorkville
CR78
J1
C70
U15
W1
C28
C27
R73 D7
R71
C64
L1
C30
C40
C56C26
C62 C45
C36
C35
C25
R29
C1
R30
R31
P O S 1 2
P O S 1 1
U1
PIN13
C3
Q6
P O S 9
P O S 8
V01
R21
W10
P O S 6
P O S 5
L6
P O S 2
P O S 1
W7
R2
C5
Ground
Q3
R5
U2
R1
C7
U11
C59
R82
C53
R28
R58
R10
Q4
R83
R64
+
Q5
C61 R19
R27
R53
J2
R80 D5
C24
R49
D6 C41
Q2
R50
R56
L4
R66
U10
ESD
R45
R22
C65
D12
W6
R46
C47 C48
C43
C42
HEADER
GND
TP2
J6
R54
C18
C17
R69
W9
C68
LINK
M1490
R81
CHASSIS GND
C73
R35
R34
P5
OPENING COMPONENT SIDE
ANTENNA
R14
C32
R40
TP3
C44
U8
+3V3 Linear
D3
U6
R25
D13
C12
R70
S2 C69
C72
R8
MIC1
D2
BLUE TOOTH
Microphone
BLUE TOOTH
W2 U17
R15
GND TP5 PIN TO TEST
P O S 1 0
MODE
TP4
C38
R42
L7
C2
C55
C6
CHASSIS GND
P O S 7
P O S 4
P O S 3
S1
DMX
ADDRESS
+24V SUPPLY
R59
R18
R17
R20
W5
C60
R44
= Ground Tie
U5
CHASSIS GND
C16
R86
W4
DMX
INPUT
L5
L3
R57
CH SEL
e
R32
CH1 FUNCTION
J7
POD #2
R52
D4
M1490 V01
POD #1
C67
LP-LED2M
DGGND LOOP
AUDIO
TO DMX INPUT
+24v FROM
POWER SUPPLY
U1 PROGRAM
CH2
RADIATION PATTERN
BRIGHTNESS
S/N LABEL
+3V3 SUPPLY
Inner Dimension 3.938" +/- .015
2337
7012
4194 4194
3923
6482
2343
2327
4969 4969
4193
3923
3922
3425 3918
4527
4969
3922
2337
4269
1U
1U
T3
1K0
2K0
100R
47R
CC55
1K0
82K5 100N
4K02
TP
DNS
2K0
1N5
4K7
1K800
4148
1K800
1K21 1N
3A5 A5
470R
10K
1K0
K1N
1N
1N
1K0
680R
ZHU
100N
2K0
4183
4K7
100N
TLV2474
33U
100R
MAX5414EUD
100N
Z4
B160
7754 39R
680R
100N
100P
619K
619K
82K5
100N
1K0 2K0
1U
1N5 22P
3K01
100R A5
470R
2K0
3K01 4K7
1N
LM393D
1K0 100R
10U
100N
100R
2386
10K00
100R
GRN
100N
10N
100R 10U
1K0 1U
20K
20K
C
Yorkville
2021
1M0
DNS
100N
100N
1U
1K0
10U
16V
600R
22P
100N
100N 100N
1U
1U
22P
1N5
1U
100N
2K0
1K0
K1N
47R
ROT
220UH
B160 DNS
47K 0R27
25V
100N
A5
2A
ROT H
10K 1K0
A5
1K
10K
100N
1N
2K0
2K01K0
1N 3A5
1K
TLV2474
470R
100N
100N
10K
10K
N30
VM
10U
16V
100R
100N
25V
10U
100N
100N
100N 4183
DNS
330P
2R0
1K8 100N
CD SN74AHC138
10K
47K5
39R
7754
7754 0A2
SN74LVTH125
10K00
TLV2316
4K02
100P
10U
DNS
33U
+ADVM
470R
B160
TLV2316
M1490
16V
CYBLE-012011-00
V01
100R
2K0
ROT
MK10DX128VLL7
47R
DNS
8200NH
6V3
680U
DNS
J42CG
MC33063A
100U
33U 100N
VM 25V
100R 10U
25V
25V
33U
ROT
LP-LED2M
LP2950-33
VM
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Assembly.SchDoc
M1490 1 *Sheet OfPCB#: Rev#:
Modified:
V01
File:2021-12-07
LP-LED2M EML Rev#: XX
Tmp Rev: V031
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.
PCB HARDWARE
1. PCBSA: ADD RTV WHERE APPROPRIATE
2. PCBSA: USE JIG SHOWN BELOW TO PLACE BLACK CAP (YS# 8636) ON TO SWITCH (YS# 3425).
3. PCBSA: USE PIZZA CUTTER TO SEPARATE BOARD FROM PANEL WHERE SMT COMPONENTS ARE CLOSE
TO THE SCORE LINE.
PCB ASSEMBLY DOCUMENTATION
YS# 3425
YS# 8636
SPECIAL PRODUCTION NOTES
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1490 1 *Sheet OfPCB#: Rev#:
Modified:
V01
File:2021-12-07
LP-LED2M EML Rev#: XX
Tmp Rev: V031
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASE FOR PRODUCTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26-OCT-2021
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
S2
P5
P1
P2
86363425
4969
4969
4969
4527
.
.
.
.
.
.
.
9029
9029
9029
9029
.
.
.
.
.
.
.
BLUETOOTH
REF POT/SW YS#FUNCTION KNOB#
POTENTIOMETERS/SWITCHES AND KNOBS
FUNCTION
BRIGHTNESS
.
.
.
.
.
.
.
CH2
CH1
.. .
P9
.
.
.
.
.
.
.
.
STYLE
.
P31
P31
P31
P31
.
.
.
.
.
.
.
.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Product(s):
M2120 1 2Sheet OfPCB#: Rev#: V01
Short Description Of The ProductDescription: LP-LED2X/4X/2M
Yorkville Sound Ltd.
550 Granite Court
Pickering, ON
Canada L1W 3Y8
www.yorkville.com EML Rev#: XX
LED_POD_SCH.SchDocModified: File:2021-11-01 Tmp Rev: V031
TOP LEVEL SHEET
W500
0R1
1206
R2
2912
12UHL3
403D
MBRA340T3
D1
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U1
7732
220UH
L8
470N1206
50V
C9
470N
1206
50V
C10
W250
1R0
1206
R13
W125
10R0
0805
R9
W125
100K
0805
R12
1K
1W00
2512
R10
10K
W125
0805
R11 1K0
W100
0805
R8
1N
0805
50V
C11 SOD-123
3V6
D6
0R
W250
R1
5919
R
LD1:1
5919
G
LD1:2
5919
B
LD1:3
5919
W
LD1:4
5919 9
LD1:5
1206
50V1U C2
5919
R
LD2:1
5919
G
LD2:2
5919
B
LD2:3
5919
W
LD2:4
5919
R
LD3:1
5919
G
LD3:2
5919
B
LD3:3
5919
W
LD3:4
5919
R
LD4:1
5919
G
LD4:2
5919
B
LD4:3
5919
W
LD4:4
5919 9
LD2:5
5919 9
LD3:5
5919 9
LD4:5
VCC
GND
W500
0R1
1206
R23
2912
12UHL4
403D
MBRA340T3
D3
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U3
1206
50V1U C4
VCC
GND
W500
0R1
1206
R4
2912
12UHL6
403D
MBRA340T3
D4
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U4
1206
50V1U C6
VCC
GND
W500
0R1
1206
R6
2912
12UHL7
403D
MBRA340T3
D5
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U5
1206
50V1U C8
VCC
GND
1206
25V1U
C13
1206
25V 1U
C17
1206
50V
1U
C18
100N
1206
250V
C16
100N 0805
50V
C21
100N
0805
50V
C3
100N
0805
50V
C19
100N
0805
50V
C12
VCC
GND 4PIN MICRO MATE
CONNECTOR
DATA IN
VCC
GND
1U
1206
50V
C1
+24V
GND
0R
W250
R25
0R
W250
R5
W063
R35
10K SOT-23
5V1
D7
W250
100R
1206
R15
W125
10K
0805
R14
+5V
GND
SO8
IN OUT
MC78L05
U6
VCC
GND
100N
0805 50V
C20
+5V
W250
0R
R16
VCC VCC
0R
W250
R24
W250
0R
R17
W250
0R
R18
W250
0R
R44
W250
0R
R45
W250
0R
R46
GND GND
0R
W250
R26
0R
W250
R3
GND
GND
+5V
+5V
P15(2)
P15(3)
P15(2)
0R
W250
R38
W250
0R
R43
0R
W250
R7
1
10W3:1 210 W3:2
3
10W3:3
410 W3:4
5
10W3:5
610 W3:6
7
10W3:7
810 W3:8
9
10W3:9
10 10 W3:10
W250
0R
R30
W250
0R
R39
SSOP-48
CY8C32 6654
P12[2]
1
P12[3]
2
P0[0]
3
P0[1]
4
P0[2]
5
P0[3]
6
VDDIO0
7
P0[4]
8
P0[5]
9
P0[6]
10
P0[7]
11
VCCD
12
VSSD
13
VDDD
14
P2[3]
15
P2[4]
16
VDDIO2
17
P2[5]
18
P2[6]
19
P2[7]
20
VSSB
21
IND
22
VBOOST
23
VBAT
24 P1[0] 25
P1[1] 26
P1[2] 27
P1[3] 28
P1[4] 29
P1[5] 30
VDDIO1 31
P1[6] 32
P1[7] 33
P15[6] 34
P15[7] 35
VDDD 36
VSSD 37
VCCD 38
P15[0] 39
P15[1] 40
VDDIO3 41
P12[0] 42
P12[1] 43
P15[2] 44
P15[3] 45
VCCA 46
VSSA 47
VDDA 48
U2
GND
+5V
+5V GND
GND
GND
+5V
1206
25V1U
C14
1206
25V1U
C23
GND
GND
GND
+5V
VCCD VCCD
GND
GND
+5V
GND
+5V
GND
W250
0R
R22
TP3
DNS TP2
DNS
W750
0R 2010
R33
P0(4)
P0(5)
P0(4)
P0(5)
P15(3)
W250
0R
R51
W250
0R
R34
P12(0)
P12(0)
W250
0R
R31
0R W250
R27
0R W250
R36
0R W250
R29
INPUT/POWER
FAN
THERM
PROGRAM HEADER
RED LED DRIVER
GREEN LED DRIVER
BLUE LED DRIVER
WHITE LED DRIVER
PROGRAM HEADER
+5V SUPPLY
2PIN MALE HEADER
W125
10K
0805
R50
GND
W125
10K
0805
R49
GND
W125
10K
0805
R48
GND
W125
10K
0805
R47
GND
VCC
1
4
W1:1
24
W1:2
3
4
W1:3
44
W1:4
54
W1:5
0R
W250
R40
0R
W250
R41
0R
W250
R42
0R
W250
R28
FAN CONTROL PIN 10 U2
W250
0R
R32
100N
0805
50V
C5
0R
W250
R52
SPRKGAP
SG1
GND
14219
W2:1
24219
W2:2
0R8
0A2
R37
SC70
2
1
3
SI1308EDL
8276
S
D
G
Q1
DO214AC
B160
D2
PTC FOR SHORT PROTECTION
FAN
FAN
0.3UH
2926
L1
0.3UH
2926
L2
W250
0R
R19
W250
0R
R20
W250
0R
R21
0.3UH
2926
L5
0.3UH
2926
L9
Other manuals for LP-LED2M
1
Table of contents
Languages:
Other YORKVILLE Lighting Equipment manuals
