Youha TheOne Express Cups PLUS User manual

Instructions for use
Express Cups
Phthalate
FREE
Food Grade Silicone
Version 1.1
PLUS

23
THE ONE Express Cups PLUS provide a mobile pumping
method that maintains the quality and effectiveness of a
non-mobile way, allowing you to express quickly and
efficiently at your convenience. Assembly is simple and
straight forward; all parts can be disassembled to enable
easy cleaning and can be sanitised in boiling water.
We hope THE ONE Express Cups PLUS supports you in a better
breastfeeding experience!
We love to hear from you! If you have feedback or wish to
share your breastfeeding story with us, please send us an
email at: [email protected]/[email protected]
Offering you a single or double, hands-free, more enjoyable
and discreet way to express breastmilk; THE ONE Express Cups
PLUS are designed to use anytime you like, wherever you like.
While nursing your baby on the other side
Sitting at your desk at work
In the kitchen
In transit - the car or airplane
Any activity where you can remain upright, and it’s safe to do so
Express Cups
Safe, convenient, effective.
Our high-quality closed-system is free from Bisphenol A (BPA)
and Diethylhexyl phthalate (DEHP). THE ONE Express Cups PLUS
is the first and only system with a breast shield made from
food-grade, frosted silicone, for your comfort and safety.
PLUS

4
Table of Contents
Important information
Product description
Cleaning
Before first use
How to assemble
Placement in bra
Disconnecting and storing milk
Postures for expressing
Connecting to YOUHA pumps
Instructions for use
How to sanitise
After each use
Connecting to a compatible pump
How to use tubing adapters for:
YOUHA (All models)
Spectra (S1, S2, M1, 9+, 9S)
Avent (Avent Double Electric Breast Pump)
Unimom (Forte)
Cimilre (F1, S3, S5)
How to use tubing adapters for:
Medela (Lactina, Symphony, Pump in
Style Advance, Sonata, Freestyle,
Swing Maxi, Swing)
Troubleshooting
5
6
7
7
7
8
10
10
11
12
13
14
15
Wash your hands with soap and water and dry thoroughly
before assembling parts before expressing.
Ensure all parts are clean and dry before each use.
Avoid harsh detergents or hard scourers sponges as this
may scratch or damage the product.
Exposure to detergent may make the silicone appear
cloudy over time.
Do not use sterilising tablets or UV steriliser to clean
silicone parts.
Store in a cool, dry space and avoid direct sunlight.
Replace the parts or the product if it shows signs of wear
or damage.
Replace the valves every three months (2 spare valves are
provided).
Please do not use a cleaning brush inside the valves as
this may damage the valve or shorten its lifespan.
This product is a personal care item, and use should not
be shared between mothers.
THE ONE Express Cups PLUS are intended for use with THE
ONE pump or compatible pumps.
If you experience any pain while using THE ONE Express
Cups PLUS, seek professional advice from a Lactation
Consultant to ensure you have the correct fit breast shield
for you.
Contains small parts which may be a choking hazard for
children.
Important information
5

Product description Cleaning
1. Before first use
a. Disassemble all parts
b. Wash in warm soapy water
c. Rinse well
d. Submerge parts in pot of water and boil for 3-5 minutes
i. Use large pot to avoid parts touching sides or bottom of pot
e. Shake off excess water and air dry on a dedicated rack
or clean cloth
2. After each use
a. Put aside parts that don’t come in contact with breastmilk
i. When used correctly, tubing does not come in contact
with breastmilk and does not need to
be cleaned routinely
b. Disassemble all other parts ( collection cup,
silicone breast shield, valve and valve base)
c. Rinse with cold water soon after use
d. Wash in warm soapy water
i. Valves can be cleaned by gentle rubbing between fingers
e. Rinse well
f.Shake off excess water and air dry on a dedicated rack
or clean cloth
3. How to sanitise
a. Follow cleaning instructions 2.a through 2.e
b. Submerge parts in pot of water and boil for 3-5 minutes
i. Use large pot to avoid parts touching sides or bottom of pot
c. Shake off excess water and air dry on a dedicated rack
or clean cloth
membrane cap,
67
2 x Membrane cap
2 x Membrane
2 x Valve base
4 x Valve (includes 2 spares) 2 x 8oz / 240ml Cup
2 x Tubing adapter A
2 x Tubing adapter B
2 x Silicone breast shield
2 x Dust Cap
2 x 22mm little breast shield
2 x 26mm little breast shield
or

Instructions for use
1
How to assemble
2
3
4
89
5
Instructions for use
How to assemble

Placement in bra
Connecting to YOUHA pumps
Postures for expressing
IDEAL
Upright
10 11
GOOD
Slightly forward
OK
Bending forward
MAY LEAK
Reclining back
WON'T WORK
Laying back (or side)
Instructions for use Instructions for use
Note: If the silicone breast shield is too large or you are experiencing low
suction (that is not resolved by following the troubleshooting steps page 15)
please try the little breast shield by inserting it into the silicone breast shield
before use.

Instructions for use
Disconnecting and storing milk
Tip! When pouring the milk, use
your thumb to squeeze breast
shield to control flow.
12 13
Connecting to a compatible pump
Your pump tubing
Tubing adapter A
1
23
YOUHA
All models
Specta
S1,S2,M1,9+,9S
Medela
Pump In Style Advanced
Ameda
Mya,Finesse ,Purely Yours ,Purely Yours Ultra* * *
Philips AVENT
Double Electric
Evenflo
Advanced*
Ardo
Calypso*
Lansinoh
Smartpump*
Hygeia
Enjoye
Motif
Luna
*Please note:For the following
breast pumps,you must use the
pump manufacturer’s tubing
connector to cap closed one of the
pump pots:
Ameda Finesse,Purely Yours or
Purely Yours Ultra
Ardo Calypso,
Evenflo Advanced,
Lansinoh Smartpump

Your pump tubing
14 15
Troubleshooting
Issue Solution
If using as a single pump, check the other side
of the tubing is firmly connected into the top
of the Y-shape tubing.
Check the membrane for damage. Replace
membrane if needed and sanitise the tubing.
If condensation occurs ensure tubing is dry
before next use. To do this, disconnect tubing
from cups and turn the pump back on to dry
the tubing while you are packing away the
breastmilk.
Ensure the tubing, back of membrane and
membrane cap are dry before use.
Check tubing to ensure it is inserted into the
membrane cap firmly.
Ensure the valves are in the correct position
and check for any damage or wear. Replace
valve if needed.
Check that all parts are securely assembled.
Nipple pain Seek advice from a Lactation Consultant.
Connecting to a compatible pump
Tubing adapter B
Tubing adapter A
Low or no
suction
Milk in tubing
Condensation
in tubing
Medela
Lactina, Symphony, Sonata, Freestyle,
Swing Maxi, Swing
* * * *
* *
*Please note:For the Medela
Pump in Style Advanced,you will
only use Tubing Adapter A and
YOUHA tubing.
For all other Medela breast pumps,
you will use Tubing Adapter A & B and
Medela tubing.