Youha TheOne User manual

perfect care for mama & babyDouble Electric Breast PumpInstructions for use

Double Electric Breast PumpDouble Electric Breast PumpWelcome to your Youha Double Electric Breast Pump.Offering you a single or double, more enjoyable and discreet way to express breastmilk. The ONE collection is designed to use anytime you like, wherever you like.Sleek and compact designQuiet and convenient operationEasy to use touchscreenEfficient and effective breastmilk expressionIdeal for use at home or at the officeThe ONE Double Electric Breast Pump is a high-quality, closedsystem. All parts that come in contact with breastmilk are free from Bisphenol A (BPA) and Diethylhexyl Phthalate (DEHP).

*Sold separately.Table of contentsProduct description8Instructions for use: operating the breast pump14Mixed mod17Instructions for use: advanced settings17Manual mode18Troubleshooting19Warranty and contact details206Battery indicator9Key functions9Before first use11After each use11How to sanitise11Cleaning10Double breast pumping13Single breast pumping13How to charge13Instructions for use: preparing to express12You can pair this system with The ONE Express Cups* to achieve a hands-free, more versatile and enjoyable way to express breastmilk.We hope The ONE Double Electric Breast Pump supports you in abetter breastfeeding experience.We would love to hear from you!If you have feedback or wish to share your breastfeeding story with us, please send us an email at: [e-mail] information 7Preparation is important7Taking care and safe use of your Youha The One product7

Wash your hands with soap and water and dry them thoroughly before assembling parts for expressing.Ensure all parts of the pump are clean and dry before each use.Important information78Preparation is importantThis product is a personal care item and use should not be shared between mothers.If you experience any pain while using The ONE Double Electric Breast Pump, seek professional advice from a lactation consultant to ensure you have the best fitting breast shield for you.Replace the valves after every 1 month of use, or sooner if signs of wear or weakness, to ensure good suction (2 spare valves included).Replace PPSU bottles and storage lids at signs of wear or every 3-6 months.Inspect teats prior to each use and pull in each direction. Teats may be worn by biting. Replace on signs of wear or weakness or every 2-3 months.Replace all other pump parts on signs of wear or weakness, or after 3 months of use.Avoid harsh detergents or hard scourers and sponges as this may scratch or damage the product. Exposure to detergent may make the silicone appear cloudy over time.Use of certain electric steam sterilisers (which may overheat parts) or UV sterilisers is not recommended as it will shorten the lifespan of the parts or possilby damage them.Do not use a cleaning brush inside the valves as this may damage the valve or shorten its lifespan.Store all parts in a cool, dry space and avoid direct sunlight.Do not leave the motor unit on charge for longer than 24-hours as this may damage the unit permanently and/or cause a safety risk.Keep out of reach of children. This product contains small parts which may be a choking hazard.Taking care and safe use of your Youha The One product.Product description2x Valve base2x Membrane2x Membrane cap1x Y-shape tubing1x Tubing connector1x Motor unit1x Charger4x Breast shield**2x Breast shieldconverter*2x Converterdust cap4x Valve(includes 2 spares)2x Youha PPSUBottle2x Teat with lid1x Single tubing2x Bottle lid1x ice pack, cooler bag**Breast shields included are sizes 24 and 27*Breast shield converters change size 24 to 21Note: Breast shields size 21, 30 and 36 are sold seperately.

CleaningKey functionsExpressMassageCycle SettingVacuum IndicatorVacuum SettingTimerManualOn / OffLock FunctionDeep ExpressCycle IndicatorIncreaseVacuum / CycleManual Mode“On” IndicatorReduceVacuum / CycleModeBattery IndicatorBattery indicatorBattery is completely chargedBattery is half fullBattery is low, charge the motor unit as soon as possibleBattery is flat, charge the motor unit before useNote: Avoid leaving on charge for longer than 24-hours as this may damage the unit permanently.9Parts of the pump that do not come in contact with breastmilk do notrequire cleaning on each use. Clean these parts prior to the first use per instructions below and again whenever you see necessary. All other parts, which do come in contact with breastmilk, are cleaned and sanitised per instructions on page 11.Parts that do not come in contact with breastmilk are: • Motor unit • Charger • Tubing • Tubing connector • Membrane capInstructions: When necessary, wipe the motor unit with a soft, damp cloth while the unit is off and locked. Do not submerge the motor unit or charger in water or sanitiser.When cleaning the Y-shape tubing and membrane cap, they can be cleaned following the steps on page 11. Ensure tubing is completely dry before use.10

CleaningInstructions for use: preparing to expressClean and sanitise all other parts of the pump, which come in contact with breastmilk, prior to first use and after each subsequent use.1. Disassemble all parts. (See page 8.)2. Wash in warm soapy water.3. Rinse well.4. Submerge parts in a pot of water and boil for 3-5 minutes. Use a large pot to avoid parts touching sides or bottom of pots.5. Shake of excess water and air dry on a dedicated rack or clean cloth.A. Before first use:1. Disassemble all parts. Put away those parts that don’t come incontact with breastmilk.2. Rinse remaining parts with cold water to remove breastmilk.3. Wash in warm soapy water. Valves can be cleaned by gentle rubbing between fingers.4. Rinse well.5. Shake of excess water and air dry on a dedicated rack or clean cloth.B. After each use:• Follow cleaning step B1-4.• Submerge parts in a pot of water and boil for 3-5 minutes. Use a large pot to avoid parts touching sides or bottom of pots.• Shake off excess water and air dry on a dedicated rack or clean cloth.How to sanitise:Insert the valve into the valvebase from underneath. Pushthe valve in as far as it will go.Screw the valve base clockwise onto the bottle until it is securely fastened.Place the membrane into thevalve base from above. Makesure it fits securely aroundthe rim by pressing down withyour fingers to ensure it sealscompletely.Attach one end of the tubingto the connection pointon the motor unit and theother end to the membranecap. Press the membranecap onto the membraneuntil it is securely in place.11121234

Instructions for use: preparing to expressInstructions for use: operating the breast pumpIf you wish to convert tosize 21, place breast shieldconverter into the size 24breast shield; push it in asfar as it will go.Note: While preparing yourpump, place the converterdust cap on the breastshield to keep the siliconefree from dust.If using a breast shield converter, ensure that it completely seals by pressing the converter down along the rim of the breast shield. Press in between the petals to remove any trapped air.Double breast pumpingOrSingle breast pumpingFor double breast pumping, useY-shape tubing. Connect eachshort end into membrane cap ofeach pumping kit. Connect longend into right side of motor unit.For single breast pumping, insertunused short tubing back intoY-shape tubing connector. This closes the vacuum loop. Or, swap Y-shape tubing with single tubing.How to charge:If battery indicator flashes red, battery requires charging.To charge, insert power cable into connection point on left side of motor unit, plug into a power outlet and switch on at the outlet. Charge until battery indicator green light to stop blinking, it is fully charged. Switch power off at outlet. Disconnect both pump and power outlet before use.13141Wash your hands with soap andwater, dry them thoroughly beforeassembling parts for expressing.23Relax in acomfortable chair.To lock, hold the On/Off button for five seconds until ‘lock’ appears on the screen and you hear a beep. To unlock, hold the On/Off button for five seconds while a countdown from five to zero displays on the screen and until you hear a double peep. These functions can be used while the pump is in operation or switched off.Position the breast shield againstyour breast. Make sure that yournipple is centred so that breastshield creates an airtight seal.4The breast pump will automaticallystart in massage mode. To changethe level of the massage, use theIncrease and Reduce buttons.Press the On/Off button.55

Instructions for use: operating the breast pumpInstructions for use: operating the breast pump1516Massage mode will run for two minutes and then automatically change to the express mode used when the pump was last turned off.Note: Pump will automatically shut off after 30 minutes (as it is commonlyrecommended not to exceed 30minutes of expressing per session).Once the flow of breastmilk beginsto slow down, finish pumping.67Unscrew the pumpingkit from the bottle andset it aside.If you are about tofeed immediately,connect teat tothe bottle.If you are storing thebreastmilk, connectthe cap to seal themilk for storage.Note: take care when storing breastmilkand follow professional health guidelines.Clean and sanitise the parts of thepump that came into contact withbreastmilk (see “Cleaning” sectionof this manual).98If you feel the letdown sooner, orwhen breastmilk begins to flow,press Mode key to change frommassage to express mode.You can press Mode again to change to deep express mode(this is not recommended for beginners).Use the Increase and Reduce buttons to choose the levelthat is most comfortable for you.Use the On/Off button to turn the breast pump off.Remove the pump from your breast and remove the tubing from the membrane cap.

Instructions for use: advanced settingsInstructions for use: advanced settings1Follow steps 1-5on page 14.1Follow steps 1-5on page 14.If you are on express or deep express mode and you feel a little to try mixed mode. Mixed mode adds cycles of massage mode in betweeneach express or deep express mode cycle.If you find that the three preset modes (Massage, Express and DeepExpress) aren’t quite right for you, you might like to try manual mode.Manual mode gives you the ability to customise both the vacuum strength and cycle length to suit you.Mixed modeInstructions2Hold down the Mode buttonfor three seconds, until boththe Massage and Expressicons appear, to indicate thatyou are in mixed mode.Manual modeInstructions1718Press theManual button.Press the Vacuum Setting button and use the Increase and Reduce buttons to set the most suitable vacuum level for you.You have now created a custom setting using the manual mode function.Then press the Cycle Setting button anduse the Increase and Reduce buttons toset the most suitable cycle level for you.Note: If you turn the pump off while using this mode it will restart on this mode, i.e., on the last setting used. Press the Mode button to start with massage mode and, after the breastmilk starts to flow, press the Mode button again to change back to your custom setting.234Note: In mixed mode, the suction and cycyle is the same level withmassage and express mode, so you may adjust the level which fits for you before change to mixed mode.

Warranty and contact detailsTroubleshooting1920IssueSolutionCondensation in tubingIf condensation occurs, ensure that tubing driescompletely after each use. To do this, disconnectthe tubing from the membrane cap and turn thepump back on to dry the tubing while you arepacking up the breastmilk.Ensure the tubing, membrane and membranecap are dry before use.Milk in tubingCheck the membrane for damage. Replace themembrane if needed and clean and sanitise orreplace the tubing.Low or nosuctionNipple painSeek advice from a Lactation Consultant.Ensure you have the correct fit breast shield.A good fit will ensure a good level of suction.You may wish to speak to a Lactation Consultantto assist in finding the most appropriate sizefor you.If using as a single pump with y-shape tubing,check that the other side of the tubing is firmlyconnected into the top of the y-shape tubingconnector.Check that all parts are securely assembled.Check the valves for any damage or wear.Replace the valve if needed.The ONE Double Electric Breast Pump has a 12-month warranty from time of purchase on product faults. Please contact your local Youha distributor for further warranty information or if you wish to order replacement parts.Hong Kong & Macau Sole DistributorPower Grand I&E LtdFlat E, 22/F, Block 3, Golden Dragon Industrial Centre,172-180 Tai Lin Pai RoadKwai Chung, N.T.Hong KongTel: [phone]www.youha.com.hkAustralia & New Zealand Sole DistributorYouha AustraliaPO Box 1109St Leonards, VIC 3223AustraliaTel: [phone]www.youha.com.auProudly Made in ChinaManufactured by:Ningbo Youhe ElectricalAppliance Technology Co., LTD