YouLumi YL-IRP-001 Operating and maintenance manual
RED LIGHT THERAPY
Instructional Manual
SAY HELLO TO YOUR RED LIGHT
660nm of red light. This light can be seen by the eyes and targets skin cells.
850nm of near infrared light. This light cannot be seen by the eyes and targets deep tissue.
-1-
THIS PACKAGE INCLUDES
●
●
1* Red light device 1* Power cable 1* eye protection
1* door hook 2* rope clip hanger 1* User manual
TIME CONTROLLER EXPLANATION
Thank you for purchasing our red light therapy, we hope you can get benefits from our device .
Before starting your first session, please make sure to read this manual as it may explain important operating
procedures. The red light devices use red 660nm and Infrared 850nm leds which is chosen to give the ideal
wavelengths found in the scientific research of the last three decades .
SPECIFICATION
Product Name
>110 mW/cm² @6inch
265*220*70mm
10.43"x8.66"x2.76"
Power
Actual Power
Input Voltage
LED QTY
Bean Angle
Irradiance
Spectrum
Material
Dimensions(mm)
Lifespan
Net Weight (kg)
YL-IRP-001
500W
150W
AC110-240V
100pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
2.50kg
>120 mW/cm² @6inch
480*220*70mm
18.90"x8.66"x2.76"
YL-IRP-002
1000W
300W
AC110-240V
200pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
5.10kg
-2-
Increase Button
Set Button
Decrease Button
PV time1
SV time2
Restart Button
RED-LIGHT-THERAPY FOR HUMAN
>130 mW/cm² @6inch
690*220*70mm
27.17"x8.66"x2.76"
YL-IRP-003
1500W
450W
AC110-240V
300pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
6.90kg
>135 mW/cm² @6inch
920*220*70mm
36.22"x8.66"x2.76"
YL-IRP-004
2000W
600W
AC110-240V
400pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
8.90kg
OPERATION GUIDE
1. Turn on the power switch, the time controller is on. Long press the "set" button, the is "P0",
and press the increase/decrease button to select the type of timing unit: 0,1,2; Our products
is "1",that means the timing unit is minute.
PV
SV
Code Item Vlue Introduction Remark
P0 Timing unit
0
1
2
Second
Minute
Hour
Time range: 0-999s
Time range: 0-999min
Time range: 0-999h
The PV setting is "P0"
SV setting is timing unit
0 means the timing unit is second
1 means the timing unit is minute
0 means the timing unit is hour
Our products the timing unit is minute, so PV is "P0" / "SV" is "1"
After P0 is set, wait for 3 seconds. The device automatically saves the Settings and rolls back display.
2. After setting the timing unit, long press the set button, the PV is "P0", then press the set again,
the PV change to "P1", and press the increase / decrease button to select the type of operating
mode: 0,1,2,3,4,5; Our products SV is "2", that means timed off after timing on.
The PV setting is "P1"
SV setting is "2"
-3-
Our products the operating mode is timed off after timing on, so PV is "P1"/"SV" is "2".
After P1 is set, wait for 3 seconds. The device automatically saves the Settings and rolls
back display.
3. After setting the Operating mode,short press the set button, PV digital tube is blinking, press the
increase /decrease key to set the corresponding time. the device after the time is on. Press the
set again, then SV digital tube is blinking, press the increase /decrease key to set the
corresponding time. The device after the time is off. Our products PV is "0", SV is "20".
Set the value, the device is on after the value.
Set the value, the device is off after the value.
4. During the operation, it starts counting down and stops working when counting down to "0".
5. During operation, the therapy can be stopped by press the power button at any time.
6. Automatically save the last setting after power off, and continue working after power on.
7. When the product is powered on, it will automatically start running. In the running state, long press
the "restart" key to restart.
FUNTION
USER INSTRUCTION
Power switch
Connector of power cord
Switch between multiple devices
1.Place your device
A: Using the hook, hand it on the place that`s most convenient for you.
B: Using the stand, set it on the place that`s most convenient for you.
Note:Distance Apply the light from0-18".
2. Input voltage AC110-240V
Flip the power switch and set the timer as your request. Then the device will work.
Exposure each area for 5-30 minutes, depending on the distance, Than move to next treatment area.
3.Enjoy the red light device
WE RECOMMEND
Expose your skin for best results
For skin issues, we want between 5 J to roughly 15 J per area. So optimal treatment times with
the lights are:
-4-
Code Item Vlue Introduction
P1 Operating mode
0
1
2
3
4
5
Timed on
Timed off
Timed off after timing on
Timed on after timing off
Cycle timing on-off
Cycle timing off-on
A. 30 seconds to 2.5 minutes per area (if the light is 6" away).
B. 1 to 3.5 minutes per area (if the light is 12" away).
C. 2 to 5 minutes per area (if the light is 18" away).
For deeper issues (muscle bone brain, organs, glands, fat, etc.).，，
We want around 20-60 J per area, so optimal treatment times and treatment distances are:
A. 2 to 7 minutes per area (if the light is 6" inches away).
B. 5 to 10 minutes per area (if the light is 12" away).
C. 8 to 15 minutes per area (if the light is 18” away).
Frequency: Do this 2 to 14 times a week nutil results are felt.
MOUNTING BRACKET SELECTION
Flat push bracket 7 type bracket Manual hanging bracket Electric hanging bracket
Note: For detailed instructions, please read the bracket installation manual
SCENE USE
WHAT ARE THE BENEFITS OF RED LIGHT?
Research shows, that the wavelengths in the spectrum of 660-850nm show optimal biotical
response.
●Skin rejuvenation
●Speed wound healing
●Enhanced blood circulation
●Aging spots and wrinkle removal
●Increase collagen
Weight loss●
●Decreases pain
●Anti-inflammatory
Chronic fatique●
Even though this technology don’t have side effects, we suggest taking the following precautions.
●Not intended for the use by children and pregnant woman.
●Do not exceed 30 Min. On one treatment.
●Don’t stare directly at the light, or were eye protection when lighting.
Contact your doctor if you :
a. Have any medical questions .
b. Suspect that you have had a negative reaction from using the device .
c. Are taking drugs known to cause light sensitivity .
Address: Floor 4, A Building, Le Hua Hang industrial zone, No.37 Kengwei Road, Shiyan Town, Bao'an, Shenzhen,China
This manual suits for next models
3
