Youw8 INK10 User manual
www.youw8.com Internet Body Monitor INK10
English
Welcome
Quick start guide
Installation
Registration
Weighing
AWeighing for the first time
BStep on the Scale
CSelect your weight
• Now log in using your e-mail address and
password.
• Weigh yourself once to start the recognition.
• Step barefoot onto the scale.
• Wait until you see the word SEND,
then step off.
• When you see the correct weight in the
list, select Link.
• From now on the system will recognise
your weights.
• You have successfully installed the product.
Weighing
Need help?
You can now use your Internet
Body Monitor.
Internet
For more information please go to www.youw8.com/support and the
FAQ questionnaire.
Helpdesk
The Netherlands 0900 2502501 (€ 0.30/ min)
(Monday-Friday between 9 AM and 5 PM)
Other countries [email protected]
The information in this installation manual is subject to change.
2008 © Inotive Solutions B.V.
All rights reserved. The information and specications included are subject to change without
prior notice. Inotive Solutions B.V. tries to ensure that all information in this document is correct,
but does not accept liability for errors or omissions.
QSG-INK10-UK-V2.0
DASHBOAR D
YOUR
LIFE
What’s in the box
What else do you need
AGo to the Youw8.com
website
BPlug in the receiver BCreate a profile
CAttach the receiver to your
modem/router
CEnter your activation code
• Open the back of the scale.
• Place the batteries in the correct sequence.
• Close the compartiment.
• Open a web browser on your computer.
• Go to the following url: www.youw8.com.
• Attach the power adapter to the receiver.
• Plug the adapter into the wall socket.
• Go to Registration on this page.
• Now ll in your details.
• Use an existing email address.
• Plug the Ethernet cable into the receiver.
• Plug the other end of the Ethernet
cable into a free Ethernet port of your
modem/router.
• The LED will fl ash rst and then will
turn on.
• The receiver has a sticker underneath
with the activation-code.
• Use this code when registering your
product.
Warning: Only use the cables and batteries supplied with the product.
Internet Body Monitor
Tape measure
Power adapter 2 AAA batteries
Quick start guide
Computer Wall socket Broadband modem
or router
Ethernet cable Receiver
Installation Registration
LX-23-ID
APlace the batteries in
the scale
Table of contents
