Ypsomed my life Aceo User manual

15
click!
1 9
4 12
8
2 10
5 13
3 11
6
147
More freedom. More condence. With mylife™.
Preparation Blood glucose measurement
Insert the test strip. The
meter starts automatically.
Apply blood vertically.
Wait until the symbol “Apply
blood” appears.
Data will be transmitted to the
mylife™ App automatically
(Bluetooth® must be turned
on and the meter paired).
Wash and dry hands. Take off the end cap by turning
both parts smoothly in opposite
directions.
Insert the lancet.
Prime the lancing device by
pulling the sliding barrel.
Put the device cap back on. Set the puncture depth.
A total of 9 depths are available. 1 for soft or thin skin; 3 for
average skin; 5 for thick or calloused skin. Finer adjustments can
be made by using the grid between 1, 3 and 5.
Twist off the protective lancet
cap and put it aside.
Take the test strip out of the
vial and close the vial.
Obtain a blood sample by
pricking your nger.
You can choose between the pre-meal marker (which is
ashing by default), a post-meal marker , a fasting marker
or no marker.

16 17 18 19
Finish
10198101-IN-en/V02
Ypsomed India Private Ltd. // 10/61/1-F, Kirti Nagar Industrial Area // New Delhi-110015 //
[email protected] // www.mylife-diabetescare.co.in // Customer Care: 099999 75157
Disclaimer: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Ypsomed is under license. Other trademarks and trade names are those of their respective owners.
Remove the end cap by
turning both parts smoothly
in opposite directions.
Stick the lancet into the
saved protective cap of the
lancet.
Push the lancet ejector
forward with your tumb to
dispose of the used lancet.
Slide down the bar on the
backside of the meter to eject
the test strip for disposal.
The lancet is single use only. Never share or reuse a
lancet.
Used test strips and lancets are potentially hazardous.
Please dispose used test strips and lancets properly in
compliance with local regulations.