Yuan SDI2SDIS User manual

SDI2SDIS
User Manual
Rev1.1

Content
Feature ....................................................................................3
Front Panel ...............................................................................4
Rear Panel ................................................................................4
DipSwitch/LED Control..................................................................5
Genlock Mode ............................................................................8
Installation................................................................................9
Package Contents........................................................................9
Specifications .......................................................................... 10
Firmware Upload ...................................................................... 11
Update List ............................................................................. 13

Feature
SDI Supports HD formats :
720p50 & 60
1080i50 & 60
1080p24, 25, 30, 50 & 60
SDI Support 525i & 625i SD D1 format
SDI support RGB/YUV 4:4:4 Sampled
Auto 3G/HD/SD-SDI detection
Can be split one 3G-SDI displays simultaneously.
Frame rate conversion(1.000/1.001)
External Dipswitch and Usb Configuration
Firmware is upgradable in the field using the integrated USB port
The converter is Plug-and-Play

Front Panel
NO
Component
Function
1
SDI Output port
(Up/Down
Conversion)
From your SDI Display Device plug into this ports
2
Indicate Box LED
The LEDs are indicate Box configuration
3
Dipswitch
Setting configuration for Box
4
Power Jack
The Power adapter plug into here.
Rear Panel
NO
Component
Function
1
Power Jack
The Power adapter plug into here.
2
SDI Input Port
From your SDI Source Device plug into
this ports
3
Sync Input Port
From you external Sync Device plug into
this port
4
USB Connector
Upgrade Firmware/Control Box by PC
1
2
3
4
1
2
3
4

DipSwitch/LED Control
NO
Component
Function
1
Control Mode
Control Box from Dipswitch or USB
2
Genlock Mode
Select Genlock Source(Free/SDI/Ref)
3
Aspect Ratio
Select Aspect Ratio
4
Output Format
Select Output Format
Control Mode:
Control Box from Dipswitch or USB.
Control Mode
Dipswitch Indicates
DipSwitch
USB
Genlock mode:
Select Genlock Mode
Input Source
Dipswitch Indicates
Free
SDI
Ref
1
2
4
3

Output Source:
Select Output Aspect Ratio
Output Source
Dipswitch Indicates
Full Screen
16:9
4:3
Dot by dot

Output Format:
Resolution
Dipswitch Indicates
Resolution
1920x1080p60
1920x1080i60
1920x1080p59
1920x1080i59
1920x1080p50
1920x1080i50
1920x1080p30
1280x720p60
1920x1080p29
1280x720p59
1920x1080p25
1280x720p50
1920x1080p24
720x480i59
1920x1080p23
720x576i50

Genlock Mode
480i
59
576i
50
720
p60
720
p59
720
p50
1080
i60
1080
i59
1080
i50
1080
p60
1080
p59
1080
p50
480i
59
●
●
●
●
●
576i
50
●
●
●
●
720p
60
●
720p
59
●
720p
50
●
1080i
60
●
●
●
●
1080i
59
●
●
●
●
●
1080i
50
●
●
●
●
1080
p60
●
●
●
●
1080
p59
●
●
●
●
●
1080
p50
●
●
●
●
●：Frame Lock
●：Genlock

Installation
SDI2SDIS installation consists of the following:
1. Disconnect +12DC adaptor to converter.
2. Connect Video Source to the Input Connector.
3. Connect Display Equipment to the output’s connector
4. Connect the +12DC adaptor to the converter.
Package Contents
The SDI2SDIS package contains the following items:
User Manual x 1
+12 DC Adapter x 1
SDI2SDIS Converter x 1

Specifications
DESCRIPTION
SDI2SDI-S
SDI Format
SD-SDI, HD-SDI & 3G-SDI
SDI Transition Rate
2.970Gb/s, 1.485Gb/s and 270Mb/s
Audio Support
Up to 8 channel.
Coaxial Cable Type
RG6/RG59(75Ω)
Cable Equalization
3G: 100m of RG6/ 86m of RG59
HD: 170m of RG6/ 120m of RG59
SD: 400m of RG6/ 280m of RG59
*1 RG6: CANARE L-5CFB Cable / RG59: Belden 9275 Cable
*2 Cable Length Performance: Depending on SDI Signal and
Cable Quality
Input Source
SDI X 1
Ref X1
Output Source
1 X SDI + 1 x SDI Pass Thru (the same time)
Firmware Updates
Via Mini-USB
Output Connector
2 x BNC [SDI]
Input Connector
1 x BNC [SDI]
1 x BNC [Ref In]
BNC Connector
3G 75 Ωinter-locked socket
USB Connector
Mini-USB
Dipswitch
Genlock Mode/Aspect Ratio/Output format
Housing
SECC
Dimension
Power Source
Power Adapter: AC 100 ~ 240 V/DC (+9 ~ 15 V)
Operation Temperature
0~50°C [32~114°F]
Storage Temperature
-20~+60°C

Firmware Upload
Firmware is upgradable in the field using the integrated USB port
How to Firmware upgrade:
Step 1.
Open Upload Firmware Program tools.exe and connect box to PC by USB Cable.
Step 2.
Plug and un-plug “DC adapter”to power on/off the converter box (the
connection check status will be changed to “Connect”)

Step 3.
Plug and un-plug “DC adapter”again (the connection check status will be
changed to “Connected”) and Please click the Open File button to select the
firmware bin file.
Step 4.
Please click “Start’Button to proceed with new firmware programming. The
PASS message will appear when the procedures finished.
Step 5.
Close Upload Firmware Program tools

Update List
Data
Version
Command
2014.09.22
V1.0
1. Release
2015.07.13
V1.1
1. Modify SDI2SDI Pic