MOUNTING THE BINOCULA S ONTO A T IPOD
•During periods of extensive observation in a stationary position, it is recommended to mount
the binoculars onto a tripod. To mount them properly, please use the tripod adapter.
•Secure the adapter to the tripod.
•emove the protective screw from the 1/4” threaded socket (5) in the base of the binoculars.
•Now, screw in the adapter screw into the binoculars' 1/4” threaded socket. The binoculars
are now securely mounted.
P OPE LY STO ING AND CA ING FO YOU BINOCULA S
•Aim to keep the lenses free of any dirt accumulation, as much as the conditions allow.
•Before cleaning the lenses, blow on them to remove sizable particles of sand and dust.
•When wiping optical surfaces, please use the lens cloth which comes standard with the set.
If a lens cloth cannot be found, you can use any soft, clean fabric (soft cotton cloth, flannel,
silk, or a cotton swab are best).
•Any grease should be removed with a tissue soaked in rubbing alcohol. In field conditions or
if you do not have rubbing alcohol, breathe right onto the surface of the lens and dry the
condensation off with a soft, clean cloth.
Attention!
•In order to avoid damaging the lens' coatings, never use paper (dry or wet) to clean the lens
nor apply rubbing alcohol directly onto the lens.
•To clean the binoculars' exterior, please use a dry tissue. For sheen, apply a few drops of
Vaseline or a similar substance to the tissue.
•The binoculars are a sensitive optical instrument; do not drop them. Safeguard them from
any other physical damage.
•Do not subject the binoculars to prolonged exposure to direct sunlight or high temperatures.
•Do not leave near a heater or heating appliances.
•When not in use, keep your binoculars in the included carrying case in a warm, dry, and