YunCore XD9500S User manual

1
Ceiling Wireless Access Point
User Manual
XD9500S / XD9508S / XD9600S / XD9610S
Version V1.0

User Manual of Ceiling AP
2
Spec
Item Description
Operation Mode 802.11b/g/n，MIMO2X2
Frequency 2.4000～2.4835 GHz
Antenna Build in 5dBi Omni antenna, Airgain brand
Power <8 W
Power Adapter DC 24V----1A (POE Adapter)-------*1*
DC 48V----0.5A (POE Adapter)-----*Optional*
Dimension 168 mm*168mm*45 mm
Weight 197g
LED Light
Flashing mean Power On
: Flashing mean WiFi working
: Flashing mean System Status
LAN: Flashing mean LAN Port working
WAN: Flashing mean WAN Port working
1. For XD9500S and XD9600S, comply with Passive PoE, then the WAN/LAN Ports are PoE ports.
2. For XD9508S and XD9610S, comply with 802.3af PoE, WAN Port is the PoE Port.
Packing Detail
Item Description Unit QTY
1 Ceiling AP PC 1
2 24V /1A POE Adapter for XD9500S/XD9600S
48V/0.5A POE Adapter for XD9508S/9610S
*Optional*
PC 1
3 Setting Accessory Set 1
4 User Manual PC 1
5 LAN Cable PC 1
Atten
tion
XD9500S/XD9600S can work with 24V PoE adapter or 24V PoE Switch;
XD9508S/XD9610S can work with 802.3af PoE Switch directly.
1ST How to Power on and Operation Mode Introduce
A. Interface Description

User Manual of Ceiling AP
3
B. Powered by PoE Adapter,
The connection diagram showed as P1, internet cable connect to PoE adapter’s LAN Port, Ceiling AP’s WAN
port connect to PoE adapter’s PoE Port, then PC will access into ceiling AP through cable or wireless
P1
C. Powered by PoE Switch
The connection diagram shows as P2, Internet cable from PoE Switch to Ceiling AP’s WAN Port, then PC
access into ceiling AP wired/wireless.
Pls note, the PoE switch should support 24V Passive PoE or 802.3af 48V PoE, can supply power together with
data transmission.
P2
The operation mode and connection:
There are three operation mode: Gateway, Wifi Repeater, Wireless AP
Gateway: The cable internet can be transmitted to wireless internet through PPPOE, Static IP, Dynamic IP. The
connection topology is showed as follows: Connect Internet cable to Ceiling AP’s WAN port, PC or end user
connect with Ceiling AP through wired/wireless.

User Manual of Ceiling AP
4
P3 Gateway
Wi-Fi Repeater: The ceiling AP can extend the existing wifi range if it signal is weak. The connection shows as
follows: Ceiling AP can search the existing wifi signal then connect it wirelessly, then PC or end user can access
into ceiling AP wireless/wired.
P4 Wi-Fi Repeater
AP Mode: plug and play, suitable for hotel, school, super market and so on. The connection is: the internet
cable is connected from router/switch to ceiling AP , then ceiling AP will transmit Wi-Fi signal, PC and end user
can access into internet by wired/wireless
P5 AP Mode
2nd：Power On and Login
1）Choose the proper power supply mode and operation mode
2）Assign an IP address for local PC
Following steps will show how to assign an IP address for PC after connect Ceiling AP and PC by wired cable :
configure local IP address as 192.168.188.X(X can be selected from 2-254) the same network segment as
ceiling AP, subnet mask 255.255.255.0, As P6 and P7 shows.

User Manual of Ceiling AP
5
P 6 Check Local Area Connection
P7 Assign IP address for PC
3）Wireless Connection between ceiling AP and PC
Assign an IP address for PC’s wireless LAN card as 192.168.188.X(X can be selected from 2-254) , then
view available wireless networking, then refresh network list, choose SSID: XD9610S, input the password:
66666666, then connect.
P 8 View Available Wireless Networks

User Manual of Ceiling AP
6
P 9 Wireless Network List
4) Click Internet Explorer and input 192.168.188.253 on the address bar, then press Enter, a login page will pop
up, input admin/admin in user name/password, then press Enter.
P 10 Login
3rd: Operation Mode
How to set ceiling AP through Quick Guide: after Log in and enter into the WEB interface page, you can find
some basic information of this wireless AP, such as SSID, Channel, Operation Mode, Software Version,
Hardware Version, System Tools...The default operation mode is Wireless AP. Following steps will show you
how to configure different operation mode.

User Manual of Ceiling AP
7
P11 Qu i c k Setu p
Gateway：Pls click “Internet Settings” on P11, then will pop up a window showed as P12, then choose
PPPOE or Dynamic IP, then can modify the SSID, Channel, Password.
If choose Dynamic IP in WAN Setting, then input the right info, then click apply and sure to finish.
If choose PPPOE (ADSL) in WAN Setting, then input user name（usually it’s an email address）and password
from your ISP, then input right info in wireless part, then click apply and sure to finish. Then waiting seconds for
AP’s restarting. Then set PC’s IP address as Obtain an IP address automatically, then share internet freely.
P12 Gateway Operation Mode

User Manual of Ceiling AP
8
P13 Change Operation Mode
WiFi Repeater：Click wifi repeater in quick setup, following page will be showed, click scan AP, choose the
right SSID(take ZMK for example), then input password of ZMK if have, then apply. Then waiting seconds for
AP’s restarting. Then set PC’s IP address as Obtain an IP address automatically, then share internet freely.
P14 WiFi Repeater

User Manual of Ceiling AP
9
P15 Select AP
AP Operation Mode: Click Wireless Coverage, then operation mode is wireless access point, plug and
play, it will pop up the following window. In this page, user can change AP’s SSID, password, channel...then
Apply to finish.
After the wireless AP restart, connect wireless AP as showed on P5, set PC’s IP address as obtain an IP
address automatically, then can share internet.
P16 Wireless Access Point
System tools: click System tools in quick setup, then input host IP address or any IP address want to ping
then input the ping count, ping size, then apply, user can check the connection between user and wireless AP,
pls check P17.
P17 System Tools

User Manual of Ceiling AP
10
4th: IP Settings and Status Checking
IP Settings: the wireless AP will restart after configure the settings, set PC’s IP address as obtain an IP
address automatically, PC and other equipment can access into top router or switch, then access into internet
successful.
Status Checking: set an IP address for PC if want to check wireless AP’s status, then the Pc’s IP address
should be in the same segment with wireless AP’s IP, such as wireless AP’s IP address is 192.168.188.253,
PC’s IP address should be 192.168.188.X, X is number of 2~252. Then input 192.168.188.253 to check
wireless AP’s status.
P18 Device Status
5th: Advanced Settings and Management
Enter into WEB interface, click Advanced Settings, then click Management to enter into Management page as
showed on P19:
P19 Management
System: export the default data, or load the new configuration file to restore the AP’s system, or
reboot to default setting.