Z-Wave ZEM-1 User manual

ZEM-1
Gateway Hub
USER MANUAL

Feature List
Z-Wave plus Gateway Hub is universal controller to control Home control Group of
notification sensor(Door/Window), On/Off Switch ,Valve Open/Closed, and Door
Lock - Keypad remotely.
Certification
-KC : Korean Certification
-Z-Wave Plus
Z-Wave
-Device type : Central Controller
-Role type : Central Static Controller
-Always ON device
-Control Groups : Notification sensor(Door/Window), On/Off Switch, Valve
Open/Closed, and Door Lock - Keypad
Power
-Powered by Adapter

Z-Wave Specifications
Device Type : Central Controller
Role Type : Central Static Controller
Command Class Control
Supported
Application Status
Association
Association Group Information
CRC16
Device Reset Locally
Manufacturer Specific
Power Level
Security
Version
Z-Wave Plus Info
Controlled
Association
Association Group Information
Basic
CRC16
Multi Channel
Multi Cannel Association
Security
Wake Up

Glossary
Device or Node
Devices and nodes are all terms to describe an individual Z-Wave
device. These are all interchangeable when setting up your Z-Wave
network
Inclusion
Add a Z-Wave device to the network
Exclusion
Delete a Z-Wave device from the network
Remove
To take a device out of a group, scene or association group while
that device still exists in the same Z-Wave network
Network Wide
Inclusion(NWI)
Network Wide Inclusion(NWI) enables both end-user friendly, Plug
and Play like Z-Wave network installation as well as professional
installation scenario where the inclusion process in items of time
will be reduced significantly. NWI is a feature supported by a new
frame type named Explorer which enables the Z-Wave protocol to
implement Adaptive Source Routing.
Z-Wave
Network
A collection of Z-Wave devices is controlled by primary and
secondary controllers operating on the same system. A Z-Wave
network has its own unique ID code so that controllers not in the
network cannot control the system.
Primary
Controller
The first controller is used to set up your devices and network. Only
the Primary Controller can be used to include or delete devices from
a network. It is recommended that you mark the primary controller
for each network for ease in modifying your network.
Association
Association is used to organize nodes in different groups allowing
the device to identify the nodes by a group identifier. The groups
can also be copied to other devices.

A. How to use Android UI?
1. Operate the Controller APK
2. Relevant UI page (below picture is example when
Switch/Sensor/Valve/Door Lock devices are included)

3. To do inclusion
-. Click “Setting”on UI page at #2 procedure
-. Click ‘inclusion’button and click ‘Yes’to run inclusion mode
4. To do exclusion
-. Click “Setting”on UI page at #2 procedure
-. Click ‘exclusion’button and click ‘Yes’to run exclusion mode
5. To do Learn mode
-. Click “Setting”on UI page at #2 procedure

-. Click ‘LearnMode’button and click ‘Yes’
6. To do Factory Reset
Factory Reset method & Description of the situation to use the
reset function.
"If this controller is the primary controller for your network,
resetting it will result in the nodes in your network being
orphaned and it will be necessary after the reset to exclude and
re-include all of the nodes in the network.
If this controller is being used as a secondary controller in the
network, use this procedure to reset this controller only in the
event that the network primary controller is missing or
otherwise inoperable."
-. Click “Setting”on UI page at #2 procedure
-. Click ‘ZW_SET_DEFAULT’button and click ‘Yes’to do
controller factory reset

B. How to connect WIFI?
1. Connect keyboard to usb port.
2. Control + C with keyboard
3. You must edit as below, if the name of the WiFi network is “JIN_TEST”.
And password is 1234567890.

Open the wpa-supplicant configuration file in nano:
pi@raspberrypi:~$ sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
Go to the bottom of the file and add the following:
Network={
Ssid=”JIN_TEST”
Psk=”1234567890”
Key=WPA-PSK
}
4. Now save the file, Ctrl+O, Enter and Ctrl+X.
5. And sudo reboot or Power off/on.
The Association Groups available Info
-Group ID : 1

-Maximum Nodes : 5
-Description : Z-Wave Plus Lifeline
Product Specifications
Product Type
IoT Controller(Hub)
RF frequency
fc29.3kHz (fc=920.9 / 921.7 / 923.1MHz)
RF operating
distance
Up to 100m outdoor line of sight, in
unobstructed environment
HW Composition
ZM5101 is used
Powered by
Adapter
Temperature
Operating : 0oC ~65oC
Storage : -10oC ~75oC
Input V,A
5V, 2A
Size
258.6 x 127.4 x 41.35
Weight
785 g
Product Name
IoT Controller(Hub)
Model No
ZEM-1
Purchase Date
20 . . .
Warranty
1 Years from Purchase Date
Manufacture
ENPLUG. Co.,Ltd.
Origin
Made in Korea
This Product is manufactured with quality control.
-1 Year warranty. Cause by manufacturing defect
-1 Year warranty. Start from purchase date
We can guarantee 1year A/S only in case of manufacturing defect.