Zass ZSHG 01 User manual

Thank you very much for purchasing the portable spray disinfectant
manufacturing machine developed by our company . To ensure that you
use the device correctly , please read the instructions carefully before
use.
Product name Portable Spray Disinfectant Manufacturing Machine
Sodium hypochlorite generator
Model
Power Supply DC5V
Running time
3min
，
6min
，
10min
Concentration 200~300ppm
，
500~600ppm
，
800~1000ppm
Texture of material
304stainless steel 、PC 、ABS
Capacity
270ml
Product size 9.2cm×7.45cm×24.5cm
Net weight 246g
Executive standard
Q/JX01 - 2012
、
WS628 -2018
Bactericidal rate 99.99%
Rate of removing
agricultural residues 93.6%~95.8%
Killing microorganism
category
Escherichia coli, Staphylococcus aureus,
Candida albicans, Pseudomonas aeruginosa,
poliovirus
1. Check that the bottle is clean and free of foreign matters.
2. Measure the salt with a salt spoon and put it into the bottle.
3. Add clear water to the bottle body to the highest water level, and
shake the bottle body to make the salt completely dissolve in the
water. Note: before working, loosen the spray gun to let the gas
produced by electrolysis out.
4. Connect the USB end of the power cord to the 5V adapter, and the
round plug end to the power hole of the base. At this time, the buzzer
rings, which means the connection is normal.
5. Press the power button in the middle of the base and the buzzer will
sound. At this time, it can be observed that the base lamp is on and
bubbles appear in the bottle, indicating the normal operation of the
machine. (press the switch once for 3 minutes, press the switch twice
for 6 minutes, and press the switch three times for 10 minutes).
6. After the completion of the work, the machine automatically stops
working, at this time, the buzzer rings five times, indicating that the
preparation of disinfectant has been completed.
7. Unplug the power cord from the equipment and use the disinfectant
correctly according to the actual use.
8. Clean the disinfectant in the bottle with clear water and dry it.
The principle of disinfection and virus killing of sodium hypochlorite
disinfectant is mainly to release new ecological oxygen [O], denature
the protein and other substances on the bacteria and virus, and oxidize
the organic macromolecules such as bacteria (virus) body protein,
nucleic acid and enzyme, so as to kill the pathogenic microorganism. At
the same time, in the process of sterilization, the osmotic pressure of
bacteria and viruses is changed, and the bacteria and viruses lose their
activity and die.
S odium hypochlorite dis infe ctant can effectively kill ba cteria ,
mycobacteria, fungi, viruses and bacterial spores, with a killing rate of
99.99%.
In addition, sodium hypochlorite can also decompose the residual
pesticides in vegetables, fruits and other agricultural and sideline
products. Most pesticides are made up of organic compounds, which
can be oxidized and decomposed by the new oxygen released by
sodium hypochlorite. The disinfectant produced by sodium hypochlorite
generator does not produce free chlorine, and will not form carcinogens
harmful to human health due to the presence of free chlorine; it will not
cause damage and toxicity to life.
Sodium hypochlorite generator
Non-toxic Harmless
No residue Pollution-free
Operating Manual
Sprayer Nozzle
Bottle
Base
6g Salt Spoon
Charging Cable
Sprayer Nozzle
Bottle
Button Switch
Charging Hole
Introduction
P r o du c t p a r a m e te r s
Parts details
Usage method
Principle of sterilization
1. The portable spray disinfectant manufacturing machine (sodium
hypochlorite generator) should be used in time after each work is
completed. Do not electrolyze many times to prevent unknown
concentration.
2. When it is found that the bubbles generated by the electrolytic cell
during the work are significantly reduced, or when there is obvious
white solid condensate, pour appropriate amount of warm water and
sodium citrate descaler into the cup, soak the electrolytic cell, and let
it stand for 1 ~ After 2 hours, pour out the water and wash it with
clean water .
Maintenance
Portable Spray Disinfectant
Manufacturing Machine
It only t a kes 3 m inute s t o
ma k e t he d is infe c ta nt.
3. When working, the base lamp lights up and flashes to indicate that
the salt concentration is too high, and the device enters a state of
self-protection. At this time, the water needs to be diluted, or the
amount of salt is appropriately reduced during subsequent use.
4. There is a slight deviation in the output voltage of the charger . In
addition, the water quality in each region is dif ferent, and the mineral
content is more or less. The concentration of the disinfectant
generated will eventually vary .
ZSHG 01
ZSHG 01

1.One copy of this warranty card, together with the purchase invoice or
record, serves as the after-sales warranty certificate. If it is lost, please
keep it properly .
2. The warranty period of this machine is one year (from the date of
purchase).
!
N o d rinking
1. With the upgrade of the product, some words or patterns in the
manual may be dif ferent from the actual situation. Please refer to the
actual product.
2. All contents of this material have been carefully checked. If there is
any printing error or misunderstanding, we reserve the right to
interpret.
3. The disinfectant is recommended to be prepared and used on the
spot.
1. The sodium hypochlorite disinfectant produced by the machine is
external disinfectant, which shall not be taken internally and placed in
a place hard to reach for children;
2. Operate the machine in strict accordance with the instructions ;
3. Do not carry out other operations during preparation to avoid damage
to the equipment;
4. Do not take out the electrode when the equipment is working, and it
is strictly prohibited to use metal conductive material to overlap
between the electrodes , so as to avoid damaging the equipment;
5. During the operation of the equipment, yellow catkins will appear in
the solution, which is a normal phenomenon , because the water is
rich in iron ions , and the above phenomena will also occur when
using salt containing potassium ferrocyanide ;
6. Please use the prepared disinfectant in time, otherwise the
concentration of the disinfectant will drop due to the influence of light
and temperature , and the retention time of the disinfectant in the cup
body should be reduced to extend the service life of the equipment;
7. The prepared disinfectant should be used on the spot as much as
possible , and the surplus should be sealed with glass or plastic
bottles to avoid light, dark and dry places and well ventilated clean
rooms , and the storage time should not be too long;
8. Sodium hypochlorite disinfectant has certain corrosiveness to metal,
so it is forbidden to use it. The sodium hypochlorite disinfectant
containing 500 mg / L effective chlorine has no corrosion to stainless
steel , slight corrosion to aluminum and moderate corrosion to carbon
Precautions and product maintenance
Warranty instructions
Reminder
Use concentration reference
Scope
of use
Allowable
concentration (in
effective chlorine
content, mg / L)
Action
time
(min)
Usage method
Genera
l object
surface
200 3 Wipe, soak, wash and disinfect the
surfaces of various cleaning objects.
500 30
Wipe, soak, wash, spray and disinfect
the surfaces of various non clean
objects. The spraying rate is based
on spraying humidity .
Air 500 10~30
Put the disinfectant into the spray pot,
spray and disinfect the required
space, kill bacteria and other
organisms in the air , and prevent
infectious diseases such as colds and
skin diseases.
Tablew
are
200 3
After the residue removal and
cleaning, the utensils shall be soaked
and sterilized; after the disinfection,
the residual disinfectant shall be
flushed out.
500 30
When disinfecting the contaminated
instruments used by the patients with
infectious diseases, the residue shall
be removed, cleaned and then
soaked for disinfection. After
disinfection, the residual disinfectant
shall be flushed out.
500 30
After disinfecting and removing the
residue, the utensils that have not
been cleaned shall be soaked and
disinfected. After disinfecting, the
residual disinfectant shall be washed
away.
Fruits
and
vegeta
bles
200 3
The fruits and vegetables shall be
cleaned first and then disinfected,
and the residual disinfectant shall be
flushed with drinking water after
disinfecting.
Textile
200 3
When disinfecting the clean clothes,
immerse all the fabrics in the
disinfectant, and wash the residual
disinfectant with drinking water after
disinfecting.
500 30
When disinfecting the contaminated
clothes, immerse all the fabrics in the
disinfectant, and wash the residual
disinfectant with drinking water after
disinfecting.
1.One copy of this warranty card, together with the purchase invoice or
record, serves as the after-sales warranty certificate. If it is lost, please
keep it properly .
2. The warranty period of this machine is one year (from the date of
purchase).
3.During the warranty period, the user needs to show the warranty card
and purchase invoice or record at the same time to get the warranty
service.
4.The following situations are not covered by the warranty:
4.1.The machine is out of warranty;
4.2.Failure or damage caused by the user's improper installation, use,
improper maintenance and use under abnormal conditions without
complying with the instructions.
4.3. Machine failure or damage caused by accident or human factors
(including change of use conditions, collision, etc.).
4.4.Product failure or damage caused by force majeure (such as
earthquake, fire, etc.) such as natural disasters.
4.5. Failure to show warranty card and purchase invoice or record.
4.6. Product damage caused by the use of non local supporting parts.
4.7. The appearance is polluted due to the use of natural environment.
5. Special reminder
5.1. When the machine and accessories you use are beyond the scope
of warranty, you can choose paid service.
5.2. Please refer to local economic standards for additional labor and
spare parts costs involved in paid services.
5.3. Relevant parts can be purchased by the company or by the user ,
and the cost shall refer to the local economic standard.
steel and copper after 72 hours immersion . When it is necessary to
soak for disinfection , the soaking time shall be controlled within 3
minutes, and it shall be washed immediately with clear water .
9. It is forbidden to use disinfectant to sterilize textiles woven with
natural fibers other than white to prevent fading. Warm tip: natural
fiber textiles are easier to fade than chemical fiber ( especially
synthetic fiber) textiles . That is to say , cotton, hemp, silk and wool
fabrics are easier to fade than nylon, polyester , acrylic and so on.
10. It is strictly prohibited to use it together with alcohol , vinegar , toilet
cleaner , concentrated hydrochloric acid and concentrated sulfuric
acid.
IMPORTANT INFORMATION ON THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19 / EU
U
sed electrical appliances are valuable materials, which is why their place is not in the garbage! Therefore, please support us and participate
i
n the protection of natural resources and the environment by handing this device over to the collection centers or to the importer whose
a
ddress you can find in thismanual or in the warranty certificate. By removing household appliances separately, you will avoid any negative
c
onsequences that incorrect disposal could have on the environment and health, and you will allow the use of constituent materials to save
e
nergy and resources. Additional details can be requested from the local administration or at the nearest collection point. Improper disposal of
w
aste may be amended in accordance with national regulations. Separate decommissioning of an appliance is specifiedby marking the
p
roduct with the image of a cut trash can.
This device complies with European safety standards and electromagnetic compliance .
This product does not contain environmentally hazardous materials (lead, mercury, cadmium,
hexavalent chromium and brominated flammable agents: PBB and PBDE).