ZBTlink Z6001AX-D User manual

ZBT International Limited
第1页 共 10 页
Z6001AX-D Gigabit Ports WIFI 6 Mesh
ROUTER

ZBT International Limited
第2页 共 10 页

ZBT International Limited
第3页 共 10 页

ZBT International Limited
第4页 共 10 页
1 Overview
1.1 Brief overview
This document describes the electrical characteristics, RF performance,
dimensions and application environment of Z6001AX-D. Under the
introduction of this document, end users or developers can quickly understand
the hardware functions of Z6001AX-D.It is a WiFi 6 home router, which can

ZBT International Limited
第5页 共 10 页
access the Internet through WAN port, and then share the Internet through
wireless WiFi 6 and 1000Mbps wired LAN.
1.2 Reference standard
Relevant standards and specifications:
USB3.0/USB2.0 Bus Standard
IEEE802.11n/g/b/a/ac/ax
IEEE802.3/802.3u/802.ab
3 Main features of the product
1).Support IEEE 802.11ax/ac/n/11b/g standard.
2).1*WAN+3*LAN 10/100/1000Mbps ports.
3).1* USB 3.0 data interface.
4).High speed 1800Mbps,dualband and gigabit ports.
5).Support MESH automatic networking.
4 Hardware
4.1 Interface
Ports
1*1000M WAN Port (Auto MDI/MDIX)
IEEE 802.3/802.3u/802.ab
3* 1000M LAN Ports(Auto MDI/MDIX)
IEEE 802.3/802.3u/802.ab
USB
1* USB3.0
DC port
DC5.0*2.1MM interface

ZBT International Limited
第6页 共 10 页
Button
1* Reset button
antennas
2* external omnidirectional 5dBi 2.4G antennas,
2* external omnidirectional 5dBi 5.8G antennas
4.2 Function of indicator light
Power LED
Always on when the power is connected, not on when the power fails or is
not connected to the power supply
WAN LED
The Internet port is always on, flashes when there is data communication, the
network port comes with LED
LAN1 LED
The Internet port is always on, flashes when there is data communication, the
network port comes with LED
LAN2 LED
The Internet port is always on, flashes when there is data
communication, the network port comes with LED
LAN3 LED
The Internet port is always on, flashes when there is data
communication, the network port comes with LED
5.8G LED
It is always on when the 5.8G WIFI function is enable,flashes when
there is data communication, and it is not on when the 5.8G WIFI is
not enable on or the 5.8G WIFI function is faulty.
2.4G LED
It is always on when the 2.4G WIFI function is enable,flashes when
there is data communication, and it is not on when the 2.4G WIFI is
not enable on or the 2.4G WIFI function is faulty.
SYS LED
1. The red light is on during the boot process, the boot is complete, the
red light is off and the green light is on
2. Press the mesh button to enter the mesh pairing state, the green
light flashes once a second, and the other lights are off
3. The main equipment network is normal, the green light and blue
light are on at the same time (cyan)
4. The slave device MESH is successfully connected, the green light is
on at a long distance, the red light is on at the same time (orange), the
distance is suitable, the green light is on, and the blue light is on at the
same time (cyan)
4.3 Introduction of hardware platform
Processor
Qualcomm IPQ6000 Quad core ARM Cortex A53s CPU, 1.2GHZ
main frequency
WIFI chipset
QCN5022 2.4G. 802.11ax/n/g/b,Maximum 573.5Mbps, 2T2R
QCN5052 5.8G. 802.11ax/n/g/b,Maximum 1201Mbps, 2T2R

ZBT International Limited
第7页 共 10 页
Ram
DDR3 256MB
Flash
128MB NAND FLASH
5 Description of power supply and power consumption
Test conditions
minimum
value
Rated
Value
Maximum Value
working voltage
T A = 25°C
6V
12V
14V
Absolute
working voltage
T A = 25°C
5.5V
16V
Working current
VIN=12V, T A =
25°C
0.6A
0.8A
1A
6 WIFI Introduction of wireless parameters
6.4 WIFI 2.4G
It is compatible with IEEE 802.11 B / g / N / ax and supports IEEE 802.11
D / h / K.Support 20MHz, 40MHz, adopt 2T2R MU-MIMO antenna technology,
the maximum connection rate is up to 573.5mbps. The following is the
description of power frequency, receiving sensitivity and transmitting power of
2.4G WiFi.
illustration
Maximum Value
Rated
Value
Minimum
Value
Working
frequency
2484Mhz
2412Mhz
Receiving
sensitivity
802.11B 11Mbps
-86
-87
-88dBm
802.11G 54 Mbps
-72
-74
-76dBm
802.11N HT20@
MCS7
-70
-72
-74dBm
802.11N HT40@
MCS7
-70
-72
-74dBm

ZBT International Limited
第8页 共 10 页
802.11AC
VHT20@ MCS8
-68
-70
-72dBm
802.11AC
VHT40@ MCS9
-66
-68
-70dBm
802.11AX
HE20@MCS11
-66
-68
-70dBm
802.11AX
HE40@MCS11
-64
-65
-76dBm
Transmitting
power
802.11B 11Mbps
26
25
24dBm
802.11G 54 Mbps
24
23
22dBm
802.11N HT20@
MCS7
23
22
21dBm
802.11N HT40@
MCS7
22
21
20dBm
802.11AC
VHT20@ MCS8
22
21
20dBm
802.11AC
VHT40@ MCS9
21
20
19dBm
802.11AX
HE20@MCS11
21
20
19dBm
802.11AX
HE40@MCS11
20
19
18dBm
6.2 WIFI 5.8G
Compatible with IEEE 802.11 a / AC / ax, supporting IEEE 802.11 D / E / h / I / K / R /
W; Support 20MHz, 40MHz, 80MHz, adopt 2T2R MU-MIMO antenna technology, the
maximum connection rate is up to 1201mbps. The following is a description of power
frequency, receiving sensitivity and transmitting power of 5.8G WiFi.
illustration
Maximum Value
Rated
Value
Minimum
Value
Working
frequency
5825Mhz
5180Mhz
Receiving
sensitivity
802.11G 54 Mbps
-72
-73
-74dBm
802.11N HT20@
MCS7
-70
-72
-74dBm

ZBT International Limited
第9页 共 10 页
802.11N HT40@
MCS7
-70
-72
-74dBm
802.11AC
VHT20@ MCS8
-68
-70
-72dBm
802.11AC
VHT40@ MCS9
-66
-68
-70dBm
802.11AC
VHT80@ MCS9
-62
-64
-66dBm
802.11AX
HE20@MCS 11
-66
-68
-70dBm
802.11AX
HE40@MCS 11
-62
-64
-66dBm
Transmitting
power
802.11AX
HE80@MCS 11
-60
-62
-64dBm
802.11G 54 Mbps
24
23
22dBm
802.11N HT20@
MCS7
23
22
21dBm
802.11N HT40@
MCS7
22
21
20dBm
802.11AC
VHT20@ MCS8
21
20
19dBm
802.11AC
VHT40@ MCS9
20
19
18dBm
802.11AC
VHT80@ MCS9
19
18
17dBm
802.11AX
HE20@MCS 11
21
20
19dBm
8 Introduction of structural parameters and
accessories
weight（KG）
TBD
Size
L*W*H=171*220*47.5 MM
Color
Black
Accessories
Power
adapter
12V/1A 1PCS

ZBT International Limited
第10 页 共 10 页
User Manual
1PCS
certificate
1PCS
Ethernet
cable
Super Cat5 cable 1PCS
9 Product working environment requirements
Working
temperature
0℃- 40℃
Store temperature
-40℃- 70℃
Working humidity
10% - 90%RH Non condensing
Store humidity
5% - 90%RH Non condensing
10 Software configuration information
Default IP
192.168.1.1
Username/passwor
d
root/admin
2.4G SSID
WIFI6-XXXXXX (X is the last 6 bits of MAC address), default
no password
5.8G SSID
WIFI6-5G-XXXXXX (X is the last 6 bits of MAC address),
default no password