ZEITRAUM FUSION User manual

FUSION
Tools:
Allen screw SW4 and SW5 (enclosed)
6 × XS Steel plug
4 × XS Steel plug
10 × Boxes
12 × Grub screw
24 × Confirmat screw
1 × Countersunk bolt (M8 × 50)
1 × Middle base
2 × Distance block
Please take attention to the functionality of the fittings:
https://www.youtube.com/watch?v=ioIUTDqtvgE
Please do the setup of the bed on a soft surface (e.g. a carpet or
blanket) to avoid damages.
1
2
3
4
5
6
7
8
9
Assembly instructions 02.2021
ZEITRAUM GmbH
Äußere Münchner Str. 2
D– 82515 Wolfratshausen
Tel [phone]
Fax [phone]
[e-mail]
www.zeitraum-moebel.de
Back wall
Crossbars with feet
Long sides
Base board
Head board
Holding strips long side
Middle plank and middle base
Upholstered headboard
Distance block
9. 10.
11. 12.
Screw the lateral support strips to the longitudinal
sides at the desired height.
Mount the center foot on the center support bar
and screw it to the head section in the desired
position.
Without spacer block: Insertion depth 14,5 cm
Horizontal spacer block: Insertion depth 12,5 cm
Standing spacer block: Insertion depth 10,5 cm
4
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2
3
9
4 5 6 7
8
45
6
7
9
1 2
3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
45
6
7
9
1 2 3
9
4 5 6 7
8
9

1. 2.
3. 4.
5. 6.
7. 8.
Turn all XS dowels into the long side. Insert the connector housings into the foot and head
sections.
Place the bed on its feet and insert the connector
housings into the mounting strips at the head end.
Screw the steel dowels into the back wall.
Plug the foot and head section onto one of the long
sides. Use the Allen key to screw the grub screws
into the connector housings to fix the steel dowels.
Plug the crossbars onto the first long side. Now
carefully tap the second long side from above onto
all parts already assembled.
Insert the back panel from the back of the box and
fix the connectors with the grub screws.
Slide the upholstery part onto the mounting strip
from above.
FUSION_Aufbauanleitung 08.2020
2 3