Zempire EVO Series Configuration guide

PITCHING INSTRUCTIONS
WARRANTY & CARE
2 Year Shelter Guarantee
Please take time to read about the protection we offer you.
All our shelters come with a guarantee designed to protect you as our valued customer. Flow
Imports Ltd., the makers of ZEMPIRE®Camping Equipment shelters, will repair or replace this
shelter, at their discretion, should it fail due to faulty materials or manufacture for a period of 2
years from the date of sale.
The Guarantee is subject to the following conditions:
1. The Guarantee only applies to an original purchaser who purchased this shelter from an
approved retail outlet.
2. The Guarantee does not apply if the shelter has been used for anything other than reasonable
personal camping use. Commercial use (e.g. rental) or continuous use as a residence are
expressly excluded.
3. Damage due to normal wear and tear, accident, acts of God, negligence (other than by Flow
Imports Ltd.), failure by the purchaser to ensure instructions for setting up and care are
observed, deterioration due to abnormal exposure to ultraviolet light, insect or mildew attack,
or any other cause reasonably beyond the control of Flow Imports Ltd. are not covered.
4. If redress is sought under the terms of this Guarantee, then the shelter must be returned by the
purchaser to the outlet from where it was purchased within the Guarantee period, in a clean,
dry state and with proof of purchase.
5. All transport costs and any other indirect costs are excluded from the Guarantee.
6. Flow Imports Ltd. reserves the right to make a reasonable charge for repairs which it
determines are not within the scope of the Guarantee.
7. The Guarantee does not limit, modify or exclude any rights under any law if doing so would
contravene that law or make any part of this Guarantee invalid. However, Flow Imports Ltd.:
a) excludes (to the extent permitted by applicable law) all conditions and warranties that might
otherwise be implied; and
b) limits its liability for breach of any such condition or Guarantee that it cannot exclude
together with its liability under the Guarantee, to repairing or replacing the goods or paying
the cost of having the goods repaired or replaced (at Flow Imports’ option).
This shelter has been made with meticulous care and attention to detail. Providing it’s properly
looked after and correctly stored, it will help you enjoy all that nature has to offer for years to come.
Get out more – you owe it to yourself!
Care Instructions
1. Ensure guy ropes are out at all times during use.
2. Never pack your roof cover away wet. If you must take your roof cover down when wet, ensure
that it is dried completely as soon as possible to prevent mildew forming.
3. If mildew does form on your roof cover, wash off with warm water and a soft brush to prevent
further growth, do not use soap or detergents.
4. This roof cover is not designed to withstand storm conditions. During strong winds, it is
recommended that the tent be taken down.
5. Do not leave your roof cover/tent pitched unnecessarily for extended periods of time, UV light
damages the fly and will shorten the life of your roof cover/tent.
Evo TXL Roof Cover Evo TL Roof Cover
Evo TM Roof Cover Evo TS Roof Cover

WWW.ZEMPIRECAMPING.COM
For a detailed description of all the features and specifications
of this product please visit our website.
Designed and tested in New Zealand. Made with care in China.
INSTRUCTIONS
1. TEST RUN
Practice attaching your roof cover at home to ensure you understand the process.
2. UNDERSTANDING THE CONDITIONS
Your roof cover is designed to extend the life of your tent by protecting it from UV degradation.
Roof covers also reduce the temperature inside your tent by reflecting heat and UV light.
While your roof cover is designed to perform in most conditions, it is not designed to be used in
very windy or stormy weather. During these conditions it is recommended that your roof cover is
removed to prevent damage to your tent.
3. UNPACKING
When taking your roof cover out for the first time, take a moment to see how it is packed or take
a photo on your phone. This will help you when it comes to packing your roof cover away. You will
notice large yellow ladder hooks at each end of your roof cover and smaller hooks running along
each side. The silver lining of the roof cover should face down and the roof cover logo should be
located at the rear of the tent.
4. PULL OVER
Before attaching your roof cover, loosen all adjustable straps along its perimeter.
With someone holding each end, pull the roof cover over the tent. (With the silver side facing
down.) To make this easier, attach guy ropes to either end of the roof cover to extend your reach.
5. HOOKING ON
Attach the large yellow ladder hooks through the loops found above
each of the rear anchor straps on your tent. (The roof cover logo should
be located at the rear of the tent.)
Working around the roof cover, attach the black plastic hooks to the
bright green webbing loops sewn along the top of your tent. (These will
be found directly above where the guy ropes are attached to your tent.)
Connect the corresponding ladder hooks through the loops found
above the front anchor straps. Tension the roof cover with the
adjustable straps to remove any slack.
6. PACKING DOWN
It is important the roof cover is removed before packing down your tent. This will help prevent
condensation from being trapped between the two layers. It will also help when pitching your
tent next time.
7. ROLLING AWAY
When rolling your roof cover away, lay the carry bag down beside the cover and fold the roof cover
to 3/4 the length of the bag. It is a good idea to fold the roof cover so that the webbing and hooks
extend outside the fold. This will ensure they do not catch and tear the fabric when opening.
To prevent mildew, ensure that your roof cover is dry when packing away. If you must pack your
roof cover up wet, hang out and air as soon as possible, mildew can develop within a few days.
Please turn page for Care Instructions and Warranty.
WARNING
KEEP ALL FLAME AND HEAT
SOURCES AWAY FROM THIS
TENT FABRIC