Zendure ZDSMCT User manual

Satellite Monitor CT
Installation Manual
[e-mail]

1
DISCLAIMER
1. Before You Begin
CONTENTS
The ZENDURE Satellite Monitor CT should be installed by a qualied person
(electrician), who should be familiar with all electrical codes, electrical
wiring practices and with experience working with home electrical systems.
Any accident, damage or injury caused by incorrect installation is the sole
responsibility of the user.
Read all safety instructions and other product information in this manual
carefully, and read any labels or stickers attached to the product before
using. Users take full responsibility for the safe usage and operation of this
product. Familiarize yourself with relevant regulations in your area. You
are solely responsible for being aware of all relevant regulations and using
Zendure products in a way that is compliant.
Keep this manual for future reference.
The information contained herein is subject to change without notice. For
the latest version, please visit
https://zendure.com/pages/download-center
1. Before You Begin
2. Specications
3. Safety Instructions
4. Product Features
4.1 What’s in The Box
4.2 Diagrams
5. Installation
1
2
2
3
3
4
5

2
2. Specications
3. Safety Instructions
Satellite Monitor CT is an IoT powered electricity meter. It allows you to
simultaneously monitor the consumption of any household appliances,
circuits and ofce equipment in single-phase electrical systems.
It is perfect for monitoring household consumption, as well as tracking how
much energy your solar panels are producing and controlling SolarFlow and
AIO output to household appliances.
Zendure Satellite Monitor CT does not support a parallel
feed conguration or comprehensive three-phase monitoring, however if
your household uses three-phrase electricity, it can monitor one phase in
that system.
Name Satellite Monitor CT
Model ZDSMCT
Weight ≈ 181g
Dimensions 140 x 35 x 77mm
Rated System Voltage 100 ～ 240VAC ±10%
Frequency 50/60Hz
Consumption < 1.1W
Max Measurement per Channel 150A
Protection Level IP44
Operating Temperature -20 ～ 70℃
Storage Temperature -40 ～ 85℃
Operating Humidity (RH) 5 ～ 95%
Max Operating Altitude 3000 M
Wireless Type Bluetooth, Wi-Fi
1. The product should be installed by a qualied person
(electrician).
2. Please check whether Satellite Monitor CT is damaged, cracked,
or cables are damaged before operating. If so, please stop
using the product immediately and contact Zendure support.
3. Do not attempt to replace the internal components of the
equipment by any unauthorized personnel.
4. Please install the product according to the user manual to
avoid injury or damage to the product.

3
4. Product Features
4.1 What’s in The Box
Monitor
IoT Antenna Mounting kit Installation
Manual
150A CT x1 AC Power Cable
x 2
5. Ensure that the input power is disconnected before installation.
6. Do not install or operate the product outdoors or expose to
moisture or submerge it in liquid. Only clean the ports with a
dry cloth.
7. Do not use the product if it is damaged or appears to be
damaged. Do not disassemble the product. Consult ofcial
Zendure channels when service or repair is required. Incorrect
disassembly or reassembly may result in a risk of re or injury
to persons.
8. Adhere to all local and national safety regulations for
installation and use.
9. This product is designed for residential use only.
10. Keep out of reach of children and pets.

4
1. IoT Antenna
2. IoT Indicator
The green light flashes while pairing and will stay lit when the device is
paired.
3. REV Indicator
Indicates reverse power to grid.
4. RUN Indicator
5. IoT/Reset Button
Press the button for 3 seconds to pair and connect to a Wi-Fi network, press
and hold for 10 seconds to factory reset.
6. CT1 Input
7. CT2 Input
8. AC Power Input
IoT Antenna
IoT Indicator
REV Indicator
RUN Indicator
IoT/Reset Button
CT1 Input
CT2 Input
AC Power Input
4.2 Diagrams

5
5. Installation
Off
L N
Turn off the main breaker and remove the cover
Open the door to the electrical panel and turn off the main breaker. Remove
the screws and the panel cover.
Step 1
Find a place for the Satellite Monitor CT
Using the Mounting Kit provided, install the Satellite Monitor CT beside the
electrical panel or inside if there is no outlet available (using appropriate
procedures).
1 2
3
Off
Or
Step 2

6
Off
L N
KL
Step 3
Clamp CT sensor around service main
Clamp the CT sensor around the service main. Note the K L direction of
energy ow (grid to home). If the installation site uses three phase power
and you have a Zendure SolarFlow or Zendure AIO, clamp the CT sensor
around the same phase as those products.
Connect the AC power cord to the grid single-phase socket
Plug the power harness into the Satellite Monitor CT AC power input
connection until it snaps into place. Then connect the harness plug to a
single-phase power outlet.
Step 4

7
On
L N
Step 5
Close the cover and turn on all breakers
Secure the cover to the box with the screws and turn power on. Conrm the
Satellite Monitor CT powers on, then close the door to the electrical panel.
Download the Zendure app
Please read the Zendure app user guide download the app using the QR
code above or by visiting https://zendure.com/pages/download-center
Step 6

8
Privacy Policy
By using Zendure Products, Applications and
Services, you consent to the Zendure Terms of Use
and Privacy Policy, which you can access via the
"About" section of the "User"
page in the Zendure App.
Warranty
This product carries a two-year warranty from purchase date.
Please feel free to contact us if you have any product questions
or suggestions.
Customer Service Email:
[email protected]

Zendure USA Inc.
Phone: [phone] (US)
Office Hours: Mon - Fri 9:00 - 17:00 PST
Support / Contact: www.zendure.com/support
Website: www.zendure.com
2023
Zendure USA Inc.
ZENDURE TECHNOLOGY CO., LIMITED
Hours: Mon - Fri 9:00 - 17:00 Pacic
Phone: [phone] (US)
[phone] (DE)
Support / Contact:
https://zendure.de/pages/contact
https://eu.zendure.com/pages/contact-us
https://zendure.com/pages/contact
Website:
https://zendure.de
https://eu.zendure.com
https://zendure.com
EU Importer: Zendure DE GmbH
Address: Hoferstraße 9B,71636 Ludwigsburg
E-mail: [email protected]