Zenna home 72s2albnl User manual

This manual suits for next models

Table of contents

Popular Household Appliance manuals by other brands

Allied Moulded Products

Allied Moulded Products SLIDERBOX SBFB-1N manual

Pella

Pella 802Q0101 installation instructions

Ellia

Ellia aspire ARM-1210 user guide

IKEA

IKEA VÄXER manual

Mesko

Mesko MS 9613 user manual

impey

impey Aqua-Grade Linear installation guide

Coopers of Stortford

Coopers of Stortford F996 Instructions for use

Gate House

Gate House R100 manual

AquaPur

AquaPur Terry CS99922 operating instructions

Ecomist

Ecomist E6 Instruction booklet

SAFERA

SAFERA Smart R Stove Guard installation manual

GENROSE

GENROSE ALBERTA installation instructions

Closed Loop

Closed Loop CLOey operating manual

SelecTech

SelecTech FreeStyle Commercial installation guide

CXS

CXS 2266-01 Information for users

MOB

MOB CX1511 user manual

Klarstein

Klarstein TOUCHLESS 10035097 manual

Voyager Dock

Voyager Dock Plant Hanger manual

11-800-892-3986 IS072S1-I2

MJC 6/13/2023

72S2ALBNL / 72S2ALSSL / 72S2ALHBL / 72S2ALBKL

zennahomeFind us:

Loremipsumdolorsitamet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tationullamcorper suscipit lobor tis nisl ut aliquip ex ea commodo consequat.D uis autemvel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent

luptatumzzrildelenitaugueduis dolore te feugait nulla facilisi.

Easy 3D Instructions

with

SCAN THE QR CODE TO

DOWNLOAD THE FREE APP

Thank you for purchasing this product!

8:30 AM - 5:00 PM EST

Monday - Friday

[email protected]

(800) 892-3986

Identify all parts, if any pieces

are missing call us.

21-800-892-3986 IS072S1-I2

Cleaning Note:

Cleaning with a dry cloth may be sufficient, but for other stains or marks wipe

gently with a damp cloth.

DO NOT use strong detergents or abrasive cleaners, they may damage the

surface of this product.

NeverRust Guaranteed for Life Warranty:

The manufacturer warrants to the original purchaser that NeverRust aluminum shower rods,

caddies and accessories will be free from red rust during its lifetime. This warranty only

covers the proper and intended use of this product. Any alteration of this product or use of

this product in any manner other than its intended use shall automatically void this warranty.

In the event of a bona fide warranty claim relating to this product, the manufacturer will,

at its election and sole discretion provide a replacement product or a substantially similar

product. This replacement is the sole and exclusive remedy with respect to any warranty

claim relating to this product. Under no circumstances will manufacturer’s liability exceed

the purchase price of this product.

THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, AND/OR

CONSEQUENTIAL DAMAGES.

To obtain warranty service, please contact (302) 326-8203. No warranty claim will be

processed without a copy of the receipt showing the retailer name, purchase price and

photographs of the defective product.

Tools Needed - not included

Install in a clean, dry, and safe

environment. Do not stand on tub ledge. Assemble on the floor.

Please identify all parts and hardware pieces. Place parts on a soft surface to prevent

scratching.

Warning

31-800-892-3986 IS072S1-I2

List of Parts

Before assembling,

make sure that the tube assembly (C) is at the shortest position

by twisting the end of the tube in the OPPOSITE DIRECTION of the arrow sticker.

A1 in. Mounting Bracket 1

B7/8 in. Mounting Bracket 1

C7/8 in. Diameter Tube assembly 1

D1 in. Diameter Tube 1

EEnd Cap 2

41-800-892-3986 IS072S1-I2

List of Hardware

Plastic Ring

Drywall Anchor

Mounting Bracket Screw

Rod Set Screw

Large Hex Wrench

Small Hex Wrench

x 1

x 2

x 1

x 2

x 1

x 4

Threaded Insert x 2

Mounting Screw x 4

51-800-892-3986 IS072S1-I2

• With the arrows on the mounting bracket for the 7/8 in. diameter tube (C) pointing UP and DOWN, fasten the

7/8 in. diameter tube assembly (C) to the mounting bracket for the 7/8 in. diameter tube (B) using the

mounting bracket screw (2) and threaded insert (3). NOTE: The flat side of the 7/8 in. diameter tube assembly (C)

should be facing DOWN.

• Tighten the mounting bracket screw (2) and threaded insert (3) using the large allen wrenches (5).

• Repeat this step for the 1 in. diameter tube (D).

Step 1 - Attaching the Mounting Brackets.

Permanent Installation - For Tension Mount Installation go to page (12)

flat side facing down

61-800-892-3986 IS072S1-I2

• Position mounting bracket (B) with arrows pointing upwards and downwards, as shown.

• Slide the end cap (E) onto the tubes (C). NOTE: Do not attach the end cap to the mounting bracket.

• Repeat this step for the 1 in. diameter tubes (D). NOTE: Do not attach the end cap to the mounting bracket.

make sure end cap dimples

line up with the notches in mounting bracket

dimples on end cap

Step 2 - Installing the End Caps.

Permanent Mount

71-800-892-3986 IS072S1-I2

Step 3 - Installing the Plastic Ring.

• NOTE: ASSEMBLE ON A SMOOTH FLAT SURFACE.

• Insert plastic ring (1) into the end of the 1 in. diameter tube (D), fig 1.

• Now, insert the end of the 7/8 in. diameter tube assemblies (C) into the end of the 1 in. diameter tubes (D), fig 2.

Permanent Mount

flat side

facing DOWN

Fig. 2

Fig. 1

flat side

facing DOWN

plastic ring (1)

81-800-892-3986 IS072S1-I2

Permanent Mount

• Measure the space between the walls of the bathtub or shower where your rod assembly will be installed.

• NOTE: Please write down your measurement below, you will need this later.

• NOTE: ASSEMBLE ON A SMOOTH FLAT SURFACE.

•On the 7/8 in. diameter tube assemblies (C), twist the tube in the direction of the arrow sticker by 2 turns,

making the assembly longer, fig 1.

•Now, extend the rod assembly to the measurement from step 4 and lock the length of the assembly

with the rod set screws (4) using the small hex wrench (6). NOTE: Tighten the rod set screws (4) until it is

flush with the rods, fig 2.

Step 4 - Measure the space between the walls.

Measurement

between walls:

Step 5 - Extending the 7/8 in. Rod and installing the Set Screw.

rod assembly

Fig. 1

Fig. 2

twist the tube

in the direction of the

ARROW STICKER

91-800-892-3986 IS072S1-I2

Permanent Mount

Step 6 - Installing the Rod Assembly in its final location.

• Secure the shower rod to the walls by twisting the end of the 7/8 in. diameter tube assembly (C) in the

direction of the ARROW STICKER, UNTIL SNUG. NOTE: Make sure rod is level.

• Once the rod assembly is level and secure, twist the 7/8 in. diameter tube assembly (C) UNTIL TIGHT.

• NOTE: Twist the tube TOWARDS YOU TO LOOSEN the rod assembly.

mounting holes

twist the tube away from you until snug

10 1-800-892-3986 IS072S1-I2

Permanent Mount

• Drill the 2 marked spots for each mounting bracket (A) and (B) .

• Insert drywall anchors (7) into wall, as shown. NOTE: If needed, using a hammer, lightly tap drywall

anchors (7) into wall.

• NOTE: Do not use a wall anchor if mounting screw will be going into a stud.

NOTE: Use a 1/4 in. (6mm) drill bit for drywall anchor installation. Use a 1/8 in. (3mm) drill bit for direct

stud installation. If installing into a material other than drywall or into stud,

consult a professional for proper installation.

Step 7 - Installing Wall Anchors.

NOT SHOWN TO SCALE

Zenna Home 72S2ALBNL User manual

Popular Household Appliance manuals by other brands