ZEPCAM T2 Series Instruction manual

T2 BODYCAM
QUICK START MANUAL
T2QS.1.1EN
POWER ON
Push button 1 for 3 secondes.
START RECORDING
Push button 1 (2 beeps).
STOP RECORDING
Push button 1 for 2 seconds.
(2 beeps, indicator 3 is green).
TAKE A PICTURE
Push button 2
TAKE A PICTURE WHILE RECORDING
Push button 1 or 2 (1 beep).
PRE - RECORDING
Red led flashes 2 times when powered on
POWER OFF
(when the indicator 3 is green)
Push button 1 for 3 seconds
1
2
3
Green light
Power on, in standby
mode, Not recording
Red light
One flash a picture is
taken
Red light
Recording video
Light
Charging

Place the Zepcam T2 in the Zepcam Docking
station B for fast charging and video offload
Offloaded videos are automatically uploaded to
the server and can be viewed online using Zepcam
Manager or other integrated software
VIDEO OFFLOAD USING
ZEPCAM CONNECT
CHARGING USING SINGLE
DOCK
VIDEO OFFLOAD AND CHARING
WITH ZEPCAM
DOCKING STATION
WEARING ZEPCAM T2
Recorded videos can be downloaded to PC
or server using the single dock and
Zepcam Connect PC software.
Offloaded videos can be viewed either
on the PC of online using Zepcam Manager.
For downloading Zepcam Connect and the
installation steps, go to:
www.zepcam.com/setup
1. Connect Zepcam single dock Ato the
USB charger
2. Place Zepcam T2 into the single dock
3. Continuous blue Led during charging
More information and FAQ:
www.zepcam.com/support
Zepcam T2 has various options for mounts
You can wear your camera in a variety of ways.
Please check our website of have a look at our
catalogue to find the best solution for your
needs
AB