Zepter TherapyAir iOn PWC-570 User manual

USER'S MANUAL
THERAPY_AIR_ION_MANUAL_EN.indd 1THERAPY_AIR_ION_MANUAL_EN.indd 1 17-01-2008 10:35:2917-01-2008 10:35:29

DEAR CUSTOMERS
First of all, we would like to thank you for purchasing a ZEPTER air cleaner. This product is
superior to existing air cleaners, guaranteeing clean and healthy air. For optimal use and
maintenance, please read this User’s Manual carefully and retain the warranty. This User’
Manual provides solutions to problems that you can easily fix in just a few minutes.
SAFETY INFORMATION pag. 04
Electricity pag. 04
Installation pag. 06
Use pag. 07
OPERATING INSTRUCTIONS pag. 10
Features pag. 10
Components pag. 12
Operating Components pag. 14
Indication Components pag. 15
Internal Filters pag. 16
Preparation pag. 18
Directions for Use pag. 19
Cleaning pag. 22
Filter Replacement pag. 24
TROUBLESHOOTING TIPS pag. 28
CUSTOMER SERVICE pag. 30
Warranty Information pag. 30
Guarantee pag. 31
DO NOT LIFT THE UNIT BY ITS POWER CORD. TO LIFT IT, HOLD IT AT THE BACK AND THE
TOP. ELECTRICAL SHOCK OR FIRE MAY OCCUR AS A RESULT.
Unplug the unit before cleaning it. Electrical shock or fire may occur as a result.
THERAPY_AIR_ION_MANUAL_EN.indd 2-3THERAPY_AIR_ION_MANUAL_EN.indd 2-3 17-01-2008 10:35:3817-01-2008 10:35:38

4
SAFETY INFORMATION
5
1. SAFETY INFORMATION
WE ASK YOU TO READ THE FOLLOWING INFORMATION BEFORE USE TO
PREVENT DAMAGE TO PROPERTY AND FOR YOUR SAFETY.
In the Instructions for Use, pay attention to the warning signs:
DANGER - Incaution can lead to serious injury or even death.
WARNING - Incaution can lead to serious injury or damage to property.
ATTENTION - Incaution can lead to minor injury or damage to property.
Safety measures concerning electricity
Only use a power cord that is compatible with the
voltage indicated on the label. Never handle the plug
with wet hands as you may suffer an electric shock or
cause a fire.
Do not unplug the appliance from the power socket
by pulling the cord as you may suffer an electric
shock or cause a fire.
Avoid frequent plugging in and unplugging of the
appliance as you may suffer an electric shock or cause
a fire.
Do not use the appliance if the power cord is damaged
as you may suffer an electric shock or cause a fire. Ask
Zepter Repair Service to replace the cord.
If your cord and plug are wet, unplug the appliance
and leave it to dry completely before using it again.
Wet accessories can cause an electric shock or fire.
Do not attempt to repair the power cord as you may
suffer an electric shock or cause a fire.
Do not plug the appliance into an adaptor or multiple
sockets that already have several appliances plugged in
as you may suffer an electric shock or cause a fire. Use
a separate power socket for this appliance.
Unplug the appliance from the power socket before
repairing, checking or replacing parts as you may
suffer an electric shock or cause a fire.
Dust the plug and wipe any water from the plug and
never use benzene or petroleum for cleaning the plug as
you may suffer an electric shock or cause a fire.
Do not place heavy objects on the power cord as you
may suffer an electric shock or cause a fire.
THERAPY_AIR_ION_MANUAL_EN.indd 4-5THERAPY_AIR_ION_MANUAL_EN.indd 4-5 17-01-2008 10:35:3817-01-2008 10:35:38

6
SAFETY INFORMATION
7
Never use the appliance in the presence of thick smoke,
acrid fumes or oils as the appliance may break
down.
Never use or place the appliance where it can be
exposed to direct sunlight as the appliance may deform
or discolour.
Position the appliance 20 cm away from the nearest
wall and 30-60 cm away from the ceiling as any
objects positioned on the walls or ceiling (such as
pieces of furniture, lights, paintings etc) might become
stained.
Position the appliance onto a flat surface carefully and
without force as you may injure yourself or damage
the appliance
Safety measures when handling the appliance
Long-term use of the appliance in closed rooms may dry the air excessively.
If the appliance emits unusual noises or smells,
immediately switch it off and ring Zepter Repair
Service as there is a risk of fire.
Never place containers filled with water or any metal
or heavy objects on top of the appliance as you may
suffer an electric shock or cause a fire.
Unplug the appliance from the power socket if it is not
in use for long periods as you may suffer an electric
shock or cause a fire.
Do not lift the unit by its power cord. To lift it hold it at
the back and the top as you may suffer an electric
shock or cause a fire.
Unplug the unit before cleaning it as you may suffer an
electric shock or cause a fire.
Safety measures when installing the appliance
Never place the appliance where there is damp, water
(rainwater) or vapours as you may suffer an electric
shock or cause a fire.
Never install the appliance near heaters, do not put
candles, cigarettes or other inflammable objects on the
appliance as you may suffer an electric shock or cause
a fire.
Never place the appliance on top of electrical appliances
such as heaters or TV sets as you may suffer an electric
shock or cause a fire.
THERAPY_AIR_ION_MANUAL_EN.indd 6-7THERAPY_AIR_ION_MANUAL_EN.indd 6-7 17-01-2008 10:35:4117-01-2008 10:35:41

8
SAFETY INFORMATION
9
Do not insert your fingers or any other objects into the
air inlets or outlets as you may suffer an electric shock
or cause a fire.
Do not allow children to climb on top of the appliance
as they may injure themselves.
Do not insert your fingers or any other objects into the
dust sensor as you may suffer an electric shock or
cause a fire.
Take care not to catch a part of your body when
opening the front cover as you may injure yourself or
damage the appliance.
Never use the appliance in places where inflammable
or explosive devices are stored or used as there is a
risk of fire.
Do not submerge the appliance in water as you may
suffer an electric shock or cause a fire.
Do not attempt to repair, disassemble or modify the
appliance as you may suffer an electric shock or cause
a fire.
Do not spray inflammable substances such as
insecticides or perfumes onto the appliance as you
may suffer an electric shock or cause a fire.
Do not use the appliance in the presence of oily sprays
as you may suffer an electric shock or cause a fire.
THERAPY_AIR_ION_MANUAL_EN.indd 8-9THERAPY_AIR_ION_MANUAL_EN.indd 8-9 17-01-2008 10:35:4617-01-2008 10:35:46

2.1 FEATURES
Excellent Air Purification
Various filters, including a HEPA filter coated with an
organic anti-bacterial material (Thiabendazole Type) and
anti-mould substances, have been designed and installed
to remove indoor pollutants in an instant.
Strong Deodorisation
The deodorant filter removes harmful gases such as VOCs
and formaldehyde, as well as the smell of food and
cigarettes.
* Experiment for the removal of toxic gases
Toxic gases like VOCs (toluene, benzene, xylene, styrene), formaldehyde,
ammonia, acetaldehyde and acetic acid are completely removed
(excluding carbon dioxide and carbon monoxide).
Negative Ion Generation
The vast quantity of negative ions generated lets you enjoy
really fresh air.
Turbo Mode Operation
The unit purifies air in turbo mode in a very short time
when pollution is due to an excessive amount of dust or
odour.
Ag allergy shield filter
Ag/Apatite, Anti-Legionella antimicrobial is a non-woven
fabric that removes bacteria and Legionella bacillus, which
are hazardous to infants. Ginkgo Biloba Leaf extract is
processed in the body to remove allergenic materials, the
influenza virus and bacteria.
Remote Control
A remote control is supplied for convenience.
Wall-Hanging
Slim Design (Option)
The slim design makes the unit suitable for wall hanging.
Rhythmic Cleaning Operation Mode
This mode is designed for optimal indoor air circulation
and the rapid removal of pollutants.
Silent Operation at Night (Bedtime Mode)
The unit automatically operates silently to create a pleasant
atmosphere at night.
Safety Design for Customers
All operations stop automatically if the front cover is
opened. The air intake/outlet is designed to ensure your
safety and prevent accidents.
Mood Light
You can select a colour from the front of the unit for mood
lighting.
Child Mode
The air-circulation speed is lowered to prevent children
from feeling cold.
10
OPERATING INSTRUCTIONS
11
THERAPY_AIR_ION_MANUAL_EN.indd 10-11THERAPY_AIR_ION_MANUAL_EN.indd 10-11 17-01-2008 10:35:4917-01-2008 10:35:49

12
OPERATING INSTRUCTIONS
13
MOOD LIGHT
OPERATION PART/
INDICATION PART
PARTICLE SENSOR
LIGHT SENSOR
(illumination sensor)
POLLUTION DEGREE
LIGHT
FRONT
REAR
HANDLE
POWER CORD
UNIT HENGER
VENTILATING GRILLE
REMOTE CONTROL
SPEED POWER
MODE
LIGHT
BATTERY (AAA SIZE)
2.2 COMPONENTS
THERAPY_AIR_ION_MANUAL_EN.indd 12-13THERAPY_AIR_ION_MANUAL_EN.indd 12-13 17-01-2008 10:35:5517-01-2008 10:35:55

14
2.3 OPERATING COMPONENTS
TURNING ON/OFF
You can operate the appliance manually, by
pressing the ON/OFF switch.
Initially, the appliance functions in the automatic
mode. When you switch it off and then on
manually, it willfunction in the last mode that you
selected.
SPEED
By pressing this button, you set the air flow
speed.
(positions: 1 - 2 - 3 - 4 - turbo). Automatic mode
and children’s mode are available in SPEED-
LEVELS from 1 to 4.
MODE
By pressing this button, you can select the
operational mode:
• Automatic mode;
• Children’s mode;
• Rhythmic mode.
MOOD LIGHT
This light indicates the current operational
mode. The light can be set manually. When the
appliance is not working, the illumination and
light are automatically set.
OPERATING INSTRUCTIONS
15
Indicators (lights) enable you to follow and control the appliance’s functions.
Air flow speed indicator (Speed Light)
The air flow speed is set automatically in the automatic mode/children’s mode in
positions 1 to 4, depending on the level of air pollution. You can manually set the
speeds from 1 to TURBO. The light, the air flow speed indicator, indicates the volume
of air running through the appliance.
•
BRIGHT - Illumination Light
If you select the night mode and the room is lit, the variable light will turn off. If the
room is not lit, the intensity of the light emitted will be reduced by 50 %. The light
is always turned off when other operational modes are selected, but you can set
the variable light manually.
•
RHYTHM - Rhythmic Cleaning Light
With rhythmic air cleaning, pollutants are removed efficiently and the air flow
speed is controlled. The light changes:
Blue - pink - violet - red
•
CHILD - Child Mode Light
When you select the operational mode, the air flow speed is set automatically. The
volume of air is lower than usual and the light turns violet.
•
AUTO - Auto Mode Light indicates that the appliance is in the automatic operational
mode and the light turns blue.
•
SLEEP - Sleep Light - This light indicates the night (quiet) mode.
•
AIR QUALITY - Air Pollution Degree Light
This light indicates the current quality of the air in the room:
•Very clean - blue
•Clean - pink
•Normally clean - violet
•Unclean - red
The Variable light (Mood Light) automatically turns on when you switch the
appliance on and the colour changes depending on the operational mode.
•Automatic / manual mode: blue
•Children’s mode: violet
•Rhythmic mode: blue - pink - violet - red
2.4 INDICATION COMPONENTS
THERAPY_AIR_ION_MANUAL_EN.indd 14-15THERAPY_AIR_ION_MANUAL_EN.indd 14-15 17-01-2008 10:35:5717-01-2008 10:35:57

16
OPERATING INSTRUCTIONS
17
NEGATIVE ION
A negative ion generator produces a vast quantity of negative ions, letting you
enjoy really fresh air.
FILTER CASE
Pre-Electrostatic, Medium, HEPA, AG Allergy, AC Deodorant filters are installed..
ANTISTATIC FILTER (Pre-Electrostatic Filter)
removes large particles of dust, mould, hairs, dandruff, pet hairs, etc.
ANTIBACTERIAL FILTER (Medium Filter)
removes the remaining, small particles of dust, bacteria bigger than 1 μm (micron),
pollen etc. Simultaneously it protects the HEPA filter, which is the next filter.
HEPA FILTER (HEPA Filter)
efficiently eliminates the tiniest particles of dust and tobacco smoke, whilst
the antibacterial thiabendazole* removes bacilli, mould spores and the like,
preventing the possibility of infection.
*Thiabendazole – an organic antibacterial compound.
ANTIALLERGIC FILTER (AG Allergy Filter)
is a mixture of silver and apatite (a mineral) and an antibacterial agent that is
especially effective in combating the bacteria Legionella (Legionella bacillus),
which is particularly dangerous for babies. Inside the filter is an extract obtained
from the leaves of ginkgo* which is used to eliminate the causes of allergies, flu
viruses and bacteria.
(*Ginkgo biloba, the oldest known plant, has very great curative powers and is
used for treating asthma, diseases of the lungs (bronchi) and also for improving
circulation).
ACTIVATED-CARBON FILTER (AC Deodorant Filter)
eliminates the smell of food, toxic gases and all odours on account of its
tremendous absorbent capacity.
Only completely clean air can pass through the barrier which is impenetrable
for the pollutants. Finally, the purified air enters the module containing the
incorporated ion generator. There it will be further enriched with negative ions
that will continue to fight all air pollutants and positive ions emitted by household
appliance and other sources.
2.5 INTERNAL FILTERS
THERAPY_AIR_ION_MANUAL_EN.indd 16-17THERAPY_AIR_ION_MANUAL_EN.indd 16-17 17-01-2008 10:35:5817-01-2008 10:35:58

18
OPERATING INSTRUCTIONS
19
This appliance is strictly intended for use in closed rooms.
The Antibacterial filter (Medium Filter) / HEPA filter / Antiallergic filter (AG
allergy Filter) / Activated-carbon filter (AC Deodorant Filter) are packed for
transport and you need to remove all packaging before use.
Fix the unit first at the bottom of the appliance and then at the top.
Insert the independent filter into the filter unit by levelling the filter and holders.
The AG filter against allergies should be positioned with the unwoven side
towards the front side of the appliance.
1.Pull the bottom of the front cover and lift it. Remove the filter unit.
2. Unpack the filters, remove the packaging. Insert the filters into the filter unit in the
following order: Pre / Medium / HEPA / AG Allergy Shield / AC Deodorant
2.6 PREPARATION
3. Fix the frame first at the bottom of the appliance and then at the top.
Put the front cover back into place on the appliance.
2.7 DIRECTIONS FOR USE
Automatic mode
When you turn the appliance on, the automatic operational indicator, a variable
light, will begin to give off a blue light.
1. Plug the appliance into a power socket with the appropriate voltage (220-240 V).
2. Press the button to start the appliance.
3. Depending on the quality of the air in the room, the air flow speed will change
automatically from position 1 to position 4. The automatic operational indicator turns
on and the variable light will give off a blue light. The appliance will initially operate
automatically and then in the last mode selected.
Manual mode
Plug the appliance into a power socket with the appropriate voltage (220-240 V).
1. Press the button to start the appliance and then the speed button; the variable
light gives off a blue light.
1. 2. 3. 4.
1. 2. 3.
THERAPY_AIR_ION_MANUAL_EN.indd 18-19THERAPY_AIR_ION_MANUAL_EN.indd 18-19 17-01-2008 10:36:0117-01-2008 10:36:01

2.Press the button to start the appliance. After you turn it on, the appliance will
initially operate automatically and then in the last mode selected.
3.Press the speed button. The appliance begins to operate in the manual mode.
4.Select a speed by pressing the SPEED (air flow speed) button:
Position 1 - Position 2 - Position 3 - Position 4 - TURBO
Programming the operational mode
Plug the appliance into a socket with the appropriate voltage (220-240 V).
1. Press the button to start the appliance (POWER) and the button for operational
mode selection (MODE).
2. Press the button to start the appliance and it will initially operate automatically
(AUTO MODE), and then in the last mode selected.
3. Select an operational mode by pressing the mode button (MODE):
AUTO - CHILD - RHYTHM (automatic / children’s mode / rhythmic cleaning).
What is the quiet night mode?
Select the “automatic/children’s mode” (AUTO / CHILD).
The appliance switches to quiet operational mode if it is in the dark for more than
three minutes. It lowers the operational speed and reduces electricity consumption.
The appliance will return to the normal operation mode if the room is lit.
• The digital sensor (light sensor) detects the surrounding light and
automatically switches the appliance to the quiet mode.
• The quiet operational mode is set when you select the “automatic
/children’s mode” (AUTO / CHILD) (not in the manual mode).
• The night indicator is activated as the quiet operational mode
begins. If there is no lighting, the intensity of the variable light is
reduced by 50%. The variable light ceases to shine, if the room is
lit again.
20
OPERATING INSTRUCTIONS
21
1. 2. 3.
Air pollution sensor
The air quality sensor is set at standard sensitivity. You may have to adjust the
sensor sensitivity if the particle sensor indicates “UNCLEAN” even after two hours
functioning continuously, or “VERY CLEAN”, although you feel that the surrounding
air is unclean.
• Simultaneously press the speed button and the operational mode
button (SPEED and MODE) and hold for more than two seconds.
• The air pollution indicator (AIR POLLUTION LEVEL) will turn off. It
will reactivate for a second and then turn off again.
• Press the speed button (SPEED) to select the sensor.
The operational mode indicator (MODE) will be
activated for a second and show the sensitivity
levels from which you can choose:
− Rhythmic mode – low sensitivity (RHYTHM: LOW)
− Children’s mode – standard sensitivity (CHILD: STANDARD)
− Automatic mode – high sensitivity (AUTO: HIGH)
Simultaneously press the speed button and the operational mode
button (SPEED and MODE) and hold for more than
two seconds to maintain the selected sensitivity.
− If no button is pressed for more than 10 seconds, the sensor
sensitivity will be automatically retained.
Variable light (Mood Light)
This light changes colour and indicates the current operational mode.
• The mood light is automatically turned on when the appliance starts
to operate. Press the mood light button to turn it on/off.
• Turn the light on/off (LIGHT: ON/OFF), when you select the quiet night mode.
• Press the mood light button and hold for 2 seconds. Then the light will turn on and
the operational mode indicator (MODE) will turn off.
THERAPY_AIR_ION_MANUAL_EN.indd 20-21THERAPY_AIR_ION_MANUAL_EN.indd 20-21 17-01-2008 10:36:0217-01-2008 10:36:02

22
OPERATING INSTRUCTIONS
23
1.Press the light button and hold for 2 seconds.
2.The light indicator is activated.
3.Quiet night mode.
4.When the quiet night mode is set, the variable light (MOOD LIGHT) is automatically
turned off.
• Press the light button and hold for 2 seconds again. The light will turn off and the
quiet night mode will continue.
1.Press the light button and hold for 2 seconds.
2.The light indicator is turned off.
3.Quiet night mode.
4.When the quiet night mode is set, the intensity of the light emitted is reduced
by 50%.
• The mood light shines in different colours depending
on the operational mode selected:
− Automatic /manual – blue
− Children’s mode – violet
− Rhythmic mode –
Blue - pink - violet - red
The mood light is reduced by 50% if the quiet night mode is selected.
2.8 CLEANING
ATTENTION! Always unplug the appliance from the power socket before
cleaning.
✔Cleaning the appliance casing
• Use a dry, soft cloth to clean the appliance.
If necessary, use a slightly damp cloth, but no polishing
agents.
✔ Cleaning the particle sensor
(once every two months)
• Open the cover of the particle sensor on the
right side of the appliance. Use a slightly
damp cotton bud (Q-tip) to clean the lens
and collect any remaining moisture.
✔ Cleaning the air inlets and outlets
Clean the air inlets and outlets with a soft brush.
Take care not to drop the brush into the appliance.
✔ Cleaning the negative ion generator
(once every two months)
Use a dry cotton bud (Q-tip) to dust the tag.
Take care not to drop the cotton bud (Q-tip) into the
appliance.
✔ Cleaning the front cover
• Remove the front cover of the appliance and use a dry
cloth or soft brush to dust it.
If necessary, use a slightly damp cloth, but no polishing
agents.
✔ Cleaning the lens on the back of the cover (once every
two months)
Remove the front cover of the appliance and use a dry
cloth, a soft brush or a cotton bud (Q-tip) to dust the mood
light on the back of the front cover. If necessary, use a
slightly damp cloth, but no polishing agents.
Always unplug the appliance from the power socket before you clean and
replace the filters.
The frequency with which filters need to be replaced will depend on the
quantity of pollutants in the room.
Fix the unit first at the bottom of the appliance and then at the top.
THERAPY_AIR_ION_MANUAL_EN.indd 22-23THERAPY_AIR_ION_MANUAL_EN.indd 22-23 17-01-2008 10:36:0217-01-2008 10:36:02

24
OPERATING INSTRUCTIONS
25
Cleaning the pre-electrostatic filter (once every 2-4 weeks)
1.Pull the lower end of the front cover to separate it from the appliance.
2.Pull the filter out by the handle.
3.Use a steam cleaner to dust the filter.
4.Completely dry the filter before you insert it into the filter unit. Replace the unit in
the appliance. Insert the independent filter into the filter unit by levelling the filter
with the holders in the unit.
2.9 FILTER REPLACEMENT
Changing the medium (antibacterial) filter (once every 4-6 months)
1.Remove the front cover and separate the medium filter from the filter unit.
2.Unpack the new filter and remove the packaging. Insert the new filter into the
filter unit. Replace the medium unit in the filter unit and put the front cover back
in place.
1. 2. 3.
1.
2.
Changing the HEPA filter (once every 12- 24 months)
1.Remove the front cover and separate the HEPA filter from the filter unit.
2. Unpack the new HEPA filter and remove the packaging. Insert the new filter into the
filter unit. Replace the unit in the appliance and put the front cover back in place.
Changing the AG allergy (antiallergic) filter (once every 6-12 months)
1.Remove the front cover and separate the AG allergy filter from the filter unit.
2.Unpack the AG allergy filter and remove the packaging. Insert the new filter
into the filter unit (the unwoven side of the AG allergy filter should face the front
of the appliance). Replace the unit in the appliance and put the front cover back
in place.
1.
2.
2.
1.
THERAPY_AIR_ION_MANUAL_EN.indd 24-25THERAPY_AIR_ION_MANUAL_EN.indd 24-25 17-01-2008 10:36:0317-01-2008 10:36:03

26
OPERATING INSTRUCTIONS
27
Changing the AC deodorant (activated-carbon) filter
(once every 12 - 24 months)
1. Remove the front cover and separate the AC deodorant filter from the filter unit.
2. Unpack the new AC filter and remove the packaging. Insert the new filter into the
filter unit. Replace the unit in the appliance and put the front cover back in place.
The filters are positioned in the following order:
Pre-electrostatic − Medium − HEPA − AG antiallergic − AC activated-carbon filter
2.
1.
MEDIUM
HEPA
AG ALLERGY FILTER
AC DEODORANT
FILTERS REPLACEMENT/CLEANING
Every 4-6 months
Every 12-24 months
Every 6-12 months
Every 12-24 months
ACTION
Replacement
Replacement
Replacement
Replacement
* based on 24 hours/1 day automatic operation.
Mounting the appliance on a wall (optional)
If you wish to mount Therapy Air Ion on the wall, make sure that the appliance
is positioned at the recommended distance from the walls and ceiling (see the
picture). Use the additional hanging hoop. Tighten the screws on the hanging hoop
to fix the appliance to the wall.
Attention:
• If the appliance is attached to a wall, the
surrounding walls and ceiling can become stained
quickly (as the negative ions magnetically attract
the particles of dust).
• When changing the filters, be careful not to drop
the front cover or the filter unit.
• Handle the power cord of the appliance carefully
(never pull it).
Filter replacement frequency
THERAPY_AIR_ION_MANUAL_EN.indd 26-27THERAPY_AIR_ION_MANUAL_EN.indd 26-27 17-01-2008 10:36:0317-01-2008 10:36:03

TROUBLESHOOTING TIPS
If problems occur when trying to operate the appliance, make sure that you have
followed the Instructions for Use correctly. Before you ring Zepter Repair Service for
help, please check the following.
28
TROUBLESHOOTING
29
CHECK SOLUTIONPROBLEM
No air is coming out
• Is the appliance plugged into
the electricity supply?
• Are the panel lights off?
• Is the appliance supplied with
electricity?
Plug the appliance into the power
socket 220-240 V.
Press the button to turn on the
appliance (POWER) and the
operational mode button (MODE).
Try to operate the appliance after
it is connected to the electricity
supply.
Air flow speed does not
change
You cannot select a speed in
the automatic operational mode
(Normal).
You cannot select a speed in the
quiet night mode (Normal).
• Is the automatic operational
mode selected?
• Is the room too dark?
The particle sensor does
not alter
Clean the lens (follow the
instructions).
Reduce the sensor sensitivity (follow
the instructions).
Increase the sensor sensitivity
(follow the instructions).
• Is there any dust on the sensor?
• Does it constantly indicate
“unclean”?
• Does it constantly indicate “very
clean”?
Operation speed
too low
Check if the filters have been
cleaned and replaced.
• Have you cleaned or replaced a
filter?
The air outlet emits an
unpleasant odour
Check if the filters have been
cleaned and replaced.
• Have you cleaned or replaced
the filter?
The particle sensor is
blinking • Ring Zepter Repair Service
Other problems • Turn the appliance off and ring
Zepter Repair Service.
If a problem persists after you have followed the procedures suggested in this table,
please call Zepter Repair Service.
3. Technical data*
Product code and name PWC-570
Model AP-1004AHZPT
Power supply (voltage) 220-240
Dust collecting system Pre-Electrostatic, Medium, HEPA, AG Allergy,
AC Deodorant filters
Safety measures Turns off automatically
Capacity (surface area covered in m2) 27,8
Maximum air flow (m3/min) 5,8
Dimensions (width x length x height) cm 54,4 x 18,1 x 51,0
Weight (kg) 8,8
* The characteristics of the appliance can be modified without prior warning for the purpose of
improvement.
THERAPY_AIR_ION_MANUAL_EN.indd 28-29THERAPY_AIR_ION_MANUAL_EN.indd 28-29 17-01-2008 10:36:0417-01-2008 10:36:04

30
CUSTOMER SERVICE
31
WARRANTY INFORMATION & SPECIFICATIONS
Please fill in the blanks and save this in order to request service.
CUSTOMER INFORMATION
Product Name Warranty PeriodTherapyAir®ION PWC-570
AP-1004AHZPT
Model
SER. No
Purchase Date
Warranty Period
Address
Customer's
information
1 year
Day.................. Month.................. Year..................
Name .......................................................................
.....................................................................................
Tel. ............................................................................
Until Month.....Year.....
SPECIFICATIONS
Power Supply Voltage rating that matches it on the rating plate
Dust Collection
Method
Safety Method
Performance
Noise level (dB (A))
Size
Weight 8.8 kg
Pre-Electrostatic, Medium, HEPA, AG Allergy, AC Deodorant filters
Automatic power-off
max 328m3 /h
min 21-max 46
(W)544X(D)181X(H)510mm
GUARANTEE
PRODUCT WARRANTY
All our appliances have undergone strict inspection tests and are guaranteed
against manufacturing defects. The Warranty is valid from the date of purchase,
as indicated on the invoice issued by the dealer upon delivery of the appliance.
The manufacturer undertakes to repair or replace, free of charge, those parts
that are found to have a manufacturing defect within the Warranty period.
Those defects that are not clearly attributable to either the material or the ma-
nufacturing will be examined at one of our Technical Service Centres or at our
headquarters and charged according to the outcome.
The warranty is only valid if:
1. The machine is found to have material or product defects.
2. No signs of breakage by the customer, or of original pieces having been
fitted by an unauthorised person have been found.
3. Original accessories have been used.
4. The machine has not been overloaded or caused to crash.
The Warranty does not apply to:
1. Components subject to wear and tear.
2. Damage caused by transport, incorrect use, negligence or faulty installation,
as per the warnings set out in the product catalogue.
3. Consumables (including filters which have to be replaced periodically).
This Warranty does not affect the consumer’s statutory rights applicable under
in-force national legislation, or the consumer’s entitlements vis à vis the retailer
as set out in the sales/purchase agreement.
In the absence of applicable national legislation, this Warranty will constitute
the consumer’s sole and exclusive legal recourse. In this case, the manufacturer
will not be liable for any accidental or consequential damage arising from the
breach of any express or implied guarantee of this product. The manufacturer’s
liability will be limited to and will not exceed the product purchase price paid
by the consumer.
This Warranty does not cover damage to the product resulting from mistreat-
ment or misuse of same, inappropriate packaging, accidents, or maintenance
and repair operations carried out by unauthorised service centres.
The manufacturer reserves the right to withdraw its Warranty if the label con-
taining the product serial number has been removed or rendered illegible after
purchase.
.....................................................................................
.....................................................................................
Day.................. Month.................. Year..................
THERAPY_AIR_ION_MANUAL_EN.indd 30-31THERAPY_AIR_ION_MANUAL_EN.indd 30-31 17-01-2008 10:36:0417-01-2008 10:36:04

© COPYRIGHT HOME ART & SALES SERVICES AG - ZEPTER GROUP - Printed in Italy 2008 - Code PMD-HC09-07-EN - Art Work: BRID MARKETING - ITALY
THERAPY_AIR_ION_MANUAL_EN.indd 32THERAPY_AIR_ION_MANUAL_EN.indd 32 17-01-2008 10:36:0417-01-2008 10:36:04