zerona SV-1010 User manual

zerona
Space Sterilizer
User Manual
SV-1010
STR-SOLUTION

Table of Contents
Parts .............................................................................. 3
Product Overview ....................................................... 4
Operation (Stand Assembly) .................................... 5
Operation (Product Operation) ................................ 6
LED Display ................................................................... 7
Filter Replacement ...................................................... 8
Specification ................................................................. 9
Safety Precaution ........................................................ 10
Warranty ........................................................................ 11

Parts
Body
DC Adapter User Manual &
Warranty
Stand (2ea) Remote Control

Product Overview
Body (side view)
Power Switch
DC Power Jack
Body (inner view)
Front Cover
Filter
Filter Guide
Air Vent
Body (front view)
LED Display
Fan Speed Control Dial
Stand
Fan SpeedFine DustHumidityTemperature
LAMP
Replacement
Notification
FAN
Replacement
Notification
IR Receiver
LED Display Remote Control
Fan Speed Button
PM10 Button
PM2.5 Button
ON/OFF Button
Fan Speed MAX/MIN Button

Operation (Stand Assembly)
2. Use screws to assemble each stand at each hole.
* Flip the body back to original direction when the screws are
assembled well.
1. Flip the body upside down.

Operation (Product Operation)
3. Using remote control.
Button Description
ON/OFF Button
ON button turns on the power and OFF button turns on the standby mode.
**Standby mode :
•Fan speed control dial blinks every 3 seconds.
•FAN and air sterilizing function stops.
•It can only be operated by using remote control.
•In order to start operation press ON/OFF button on the remote control or fan speed control dial.
Increase Fan Speed Button Fan speed can be increased until level 5.
Decrease Fan Speed Button Fan speed can be decreased until level 1.
PM2.5 Button Displays PM2.5 fine dust concentration.
PM10 Button Displays PM10 fine dust concentration.
Fan speed MAX/MIN Button Adjust the fan speed to MAX/MIN at once.
1. Turning on the product.
1-1. Connect the DC adapter and plug in the power plug.
1-2. Plug in the DC adapter to the DC power jack on the side
of the product.
1-3. Turn on the power switch on the side of the product.
1-4. The LED display lights up and product operation will start
when the power is turned on.
2. Controlling fan speed.
2-1. Turning the fan speed control dial clockwise will increase
the fan speed.
2-2. Turning the fan speed control dial anticlockwise will
decrease the fan speed.
2-3. Fan speed can be adjusted in 5 levels and will show as
bars on the LED display.

LED Display
1. Temperature
•Range of display : -9℃ ~ 85℃
•Below -9℃ will display as negative (-).
2. Humidity
•Range of display : 0 ~ 99%RH
5. LAMP Replacement Notification (Red color)
•Lights up : Replace the LAMP (LAMP lifespan : 10,000 hours)
•Blinks : Contact service center when the same notification is
displayed after replacing the lamp due to circuit break or lamp
power problem.
* How to reset the notification
1. Cumulative usage time has to be reset when replacing the
LAMP.
2. Turn on the power switch while pressing the fan speed
control dial.
3. LAMP notification will blink and reset the cumulative usage
time when pressing the fan speed control dial for 3 seconds.
4. Release fan speed control dial.
6. FAN Replacement Notification (Red color)
•Lights up : Contact service center due to FAN error.
3. Fine dust
•Displays PM2.5 and PM10 fine dust concentration
consecutively.
•Effective measurement range : 0 ~ 500ug/m3
4. Fan speed
•5 levels are shown as bars.

Filter Replacement
1. Pull the Front Cover.
2. Pull the Filter Guide forward to lift the Filter.
3. Pull the Filter.
* Assemble the new filter in the following order: filter, filter guide, front cover.
* Notice : Recommended lifespan of a filter is maximum 6 months.

Model SV-1010
Power Consumption AC100-240V 50/60 Hz 1.5A
Rated Output DC12V 3.5A
Power Consumption 12W
Certification Adapter certifications used
Dimension W500 x D140 x H405 mm
Weight 9.8kg
Applicable Area 109m2
Country of Origin Republic of Korea
Manufacturer STR-SOLUTION Co., Ltd.
Specification

Do not use other adapters other than the one provided.
- It causes product failure.
Do not use damaged power plug, power code, or loose outlets.
- It causes electric shock, short circuit, or fire
- Please contact the service center when the power plug or power cord is
damaged.
Please proceed with LAMP replacement after contacting the service
center.
- We are not responsible for results due to customer’s arbitrary replacement of
the LAMP.
Do not place flammable substances near the product, such as spray,
oil, gas, etc.
- It causes explosion or fire.
Wipe with clean wet cloth in case of contamination.
- Do not wipe the product using detergent or chemical solvent, such as thinner,
benzene, etc. Doing so may damage the product surface.
Do not install the product near heat-generating equipment.
- It causes deformation, discoloration, or fire.
Do not install the product in a damp area and keep away from
splashing rain or water.
- It has a risk of electric shock or fire.
Do not use the product in places near water such as public bath,
shower, swimming pool, etc.
- It causes fire due to electric shock or heat.
Contact service center when water goes inside the product.
- It causes electric shock or fire.
Do not pour water to the air vent.
- It causes electric shock, fire, or injury due to product failure.
Do not install the product in narrow or on uneven surfaces.
- It causes deformation and product failure.
Do not place the product on tables, sink, or unstable places.
- It causes deformation or product failure when the product falls.
Do not place objects that children can step on near the product.
- Children may be injured due to product falling.
Safety Precaution

Warranty
Model No. SV-1010 Warranty period 1 year from purchase date
Serial No. At the back of the product
Purchase date 20 . .
Name Phone No.
Address
Note