Zeta ZT-CP2 User manual

RESETABLE CALL POINTS
INSTALLATION AND USER MANUAL
FULLY
COMPLIES
WITH EN54-11 ISSUE: 1
DATE: 15/8/05

Model No ZT-CP1 Part No 43-301
Type A Call Point
PAGE 2

Model No ZT-CP2 Part No 43-300
Type B Call Point
PAGE 3

Call Point Dimensions
TYPE A
TYPE B
PAGE 4

SURFACE MOUNTING – The Surface Box can be fixed to the wall using
standard wall fixings through a choice of the holes provided. Cable entry
can be made through back wall or through side wall where indicated. Cable
glands up to 20mm diameter can be fitted in area marked on product
pointing vertically towards ceiling or floor
FLUSH MOUNTING – The Surface Box can be discarded and the Call
point mounted onto any UK standard single-gang back box with a
minimum depth of 16mm.
All Call Point Models
Mounting
Drill up to 20mm for
Cable Glands
Standard Wall Fixings
PAGE 5

All Call Point Models
Wiring the Call Point
-ve IN & OUT
+ve IN & OUT
Screw Terminals accept
0.28-2.5mm conductors
There is no direct contact
to the micro switch
PAGE 6

All Call Point Models
Operation
A
CTIVATED
FLAG SHOWING
LED ON
1
2
TYPE A
PRESS
TYPE B
1. BREAK SNAPLATCH
2. LIFT AND PRESS
PAGE 7

All Call Point Models
Resetting the Call Point
Insert Key (1) into Reset Barrel (2)
Turn Key Clockwise.
The Flag (3) retracts and Operating
Element (4) springs forward.
The LED (5) will turn off.
Unit is now reset
5
4
1
2
3
PAGE 8

All Call Point Models
Test
TEST
1.Insert Key
2.Turn 90oClockwise
3. LED will turn on
4. Return to stop
PAGE 9

Fixing to Back Box & DIP Switch Setting (Addressable)
Fixing to back box
1.Remove Front Cover
2.Swing Operating Element down
Addressable only
3.Set Dipswitches and mark label
with call point address
ALL Call Points
4. Fit mounting screws as shown
& tighten
5.Lift Flag
6.Return Operating Element
7.Ensure unit operational by
pressing operating element to
activate, and then lift flag to return
position
8.Fit Front Cover ensuring Reset
Barrel mates with post on Flag
PAGE 10

Dip Switch Address Settings --- 0= ON 1= OFF (Switch 8 not used)
ADD
R
1 2 3 4 5 6 7 8
1 1 0 0 0 0 0 0
2 0 1 0 0 0 0 0
3 1 1 0 0 0 0 0
4 0 0 1 0 0 0 0
5 1 0 1 0 0 0 0
6 0 1 1 0 0 0 0
7 1 1 1 0 0 0 0
8 0 0 0 1 0 0 0
9 1 0 0 1 0 0 0
10 0 1 0 1 0 0 0
11 1 1 0 1 0 0 0
12 0 0 1 1 0 0 0
13 1 0 1 1 0 0 0
14 0 1 1 1 0 0 0
15 1 1 1 1 0 0 0
16 0 0 0 0 1 0 0
17 1 0 0 0 1 0 0
18 0 1 0 0 1 0 0
19 1 1 0 0 1 0 0
20 0 0 1 0 1 0 0
21 1 0 1 0 1 0 0
22 0 1 1 0 1 0 0
23 1 1 1 0 1 0 0
24 0 0 0 1 1 0 0
25 1 0 0 1 1 0 0
26 0 1 0 1 1 0 0
27 1 1 0 1 1 0 0
28 0 0 1 1 1 0 0
29 1 0 1 1 1 0 0
30 0 1 1 1 1 0 0
31 1 1 1 1 1 0 0
32 0 0 0 0 0 1 0
33 1 0 0 0 0 1 0
34 0 1 0 0 0 1 0
35 1 1 0 0 0 1 0
36 0 0 1 0 0 1 0
37 1 0 1 0 0 1 0
38 0 1 1 0 0 1 0
39 1 1 1 0 0 1 0
40 0 0 0 1 0 1 0
41 1 0 0 1 0 1 0
42 0 1 0 1 0 1 0
ADD
R
12345678
43 1101010
44 0011010
45 1011010
46 0111010
47 1111010
48 0000110
49 1000110
50 0100110
51 1100110
52 0010110
53 1010110
54 0110110
55 1110110
56 0001110
57 1001110
58 0101110
59 1101110
60 0011110
61 1011110
62 0111110
63 1111110
64 0000001
65 1000001
66 0100001
67 1100001
68 0010001
69 1010001
70 0110001
71 1110001
72 0001001
73 1001001
74 0101001
75 1101001
76 0011001
77 1011001
78 0111001
79 1111001
80 0000101
81 1000101
82 0100101
83 1100101
84 0010101
A
DD
R
1 2 3 4 5 6 7 8
85 1 0 1 0 1 0 1
86 0 1 1 0 1 0 1
87 1 1 1 0 1 0 1
88 0 0 0 1 1 0 1
89 1 0 0 1 1 0 1
90 0 1 0 1 1 0 1
91 1 1 0 1 1 0 1
92 0 0 1 1 1 0 1
93 1 0 1 1 1 0 1
94 0 1 1 1 1 0 1
95 1 1 1 1 1 0 1
96 0 0 0 0 0 1 1
97 1 0 0 0 0 1 1
98 0 1 0 0 0 1 1
99 1 1 0 0 0 1 1
100 0 0 1 0 0 1 1
101 1 0 1 0 0 1 1
102 0 1 1 0 0 1 1
103 1 1 1 0 0 1 1
104 0 0 0 1 0 1 1
105 1 0 0 1 0 1 1
106 0 1 0 1 0 1 1
107 1 1 0 1 0 1 1
108 0 0 1 1 0 1 1
109 1 0 1 1 0 1 1
110 0 1 1 1 0 1 1
111 1 1 1 1 0 1 1
112 0 0 0 0 1 1 1
113 1 0 0 0 1 1 1
114 0 1 0 0 1 1 1
115 1 1 0 0 1 1 1
116 0 0 1 0 1 1 1
117 1 0 1 0 1 1 1
118 0 1 1 0 1 1 1
119 1 1 1 0 1 1 1
120 0 0 0 1 1 1 1
121 1 0 0 1 1 1 1
122 0 1 0 1 1 1 1
123 1 1 0 1 1 1 1
124 0 0 1 1 1 1 1
125 1 0 1 1 1 1 1
126 0 1 1 1 1 1 1
PAGE 11

Zeta Alarms ® is a registered brand name of GLT Exports Ltd.
For further information about the products contained in this leaflet, or the entire range
of fire detection and alarm systems, please visit contact GLT Exports Ltd, 72-78 Morfa
Road, Swansea, UK, SA1 2EN. Tel: [phone] www.zeta-alrms.co.uk
Technical Details – all Call points
WARNING – There is no direct connection to the microswitch
Termination – Screw terminals accept 0.28 to 2.5mm conductors
Maximum Current – 50 mA
Supply Voltage – 18-30 VDC
Materials – Body Plastics - Flame Retardant ABS / Operating Element – 20% TFPP / Snaplatch – PS Protection Cover – clear PC
To re-order new parts, please use these Part Nos
Part No CODE Description
43-300 ZT-CP2 CONVENTIONAL CALL POINT TYPE B- RESETABLE
43-301 ZT-CP1 CONVENTIONAL CALL POINT TYPE A - RESETABLE
43-302 ZT-CP2/F CONV FLUSH CALL POINT TYPE B- RESETABLE (no surface box)
43-303 ZT-CP1/F CONV FLUSH CALL POINT TYPE A- RESETABLE (no surface box)
43-305 ZT-CP2/AD ADDRESSABLE CALL POINT TYPE B - RESETABLE
43-306 ZT-CP1/AD ADDRESSABLE CALL POINT TYPE A - RESETABLE
43-307 ZT-CP2F/AD ADDR FLUSH CALL POINT TYPE B - RESETABLE (no surface box)
43-308 ZT-CP1F/AD ADDR FLUSH CALL POINT TYPE A - RESETABLE (no surface box)
43-310 ZT-CP2Y CONV. YELLOW MAN. REL. CALL POINT TYPE B
43-312 ZT-CP2B CONV. BLUE GAS ABORT. CALL POINT TYPE B
43-315 SNAP PACK OF 5 REPLACEMENT SNAPLATCHES
43-320 CP-CV REPLACEMENT CALL POINT COVER
43-325 CP-KY REPLACEMENT CALL POINT TEST KEY
PAGE 12