Zetronix zClock-200w User manual

zClock-200w
User Manual

Table of contents
Product Diagram............
Alarm clock operation.....
Setting up Hidden Cam..
Advanced set up......
Windows............
Apple OSX ........
Playback menu..
Live video menu
Network options
Warranty.....................
..........Page 1
..........Page 5
..........Page 7
........Page 14
........Page 15
........Page 19
........Page 20
........Page 21
........Page 22
........Page 27

1. Time
2. Night vision light A
3. Camera
4. Night vision light B
5. Light Sensor
6. Night vision light B
7. Charging indicator light

8. UP
9. Down
10. Time announcement
11. SET
12. Mode

13. Micro SD Card slot
14. Camera switch
15. DC Power
16. Reset switch

17. Speaker A
18. Speaker B
19. Microphone
20. Ethernet port

Alarm Clock Operation
The zClock-200w clock operates
inconspicuously as a fully functional alarm
clock capable of displaying the time and date
along with an optional talking clock function.
Setting the Time
-Press SET button (button 11) to begin
entering the date and time. The clock will ash
2010, press the UP (button 8) and DOWN
(button 9) buttons to adjust the year.
-Press SET again to adjust the month, again
using UP and DOWN. Press SET to adjust the
day, again to adjust the hour, and again for
minutes. Press MODE (button 12) to nish
setting the clock.
-Pressing UP while in time mode will toggle the
time between 12 and 24 hour display

Setting the Alarm
-Press the MODE button (button 12) to
enter alarm clock mode.
Press SET (button 11) to select the hour.
Use UP (button 8) and DOWN (button 9)
to select the hour. Press SET again to set
the minute and UP and DOWN to select it.
Press SET again to choose how long to set
the Snooze interval. Use UP and DOWN to
choose between 1 and 60 minutes. Press
SET again to choose the alarm sound and
use UP and DOWN to choose between
them. Press MODE to nish setting the
alarm.
-Turning the alarm on and off
Press UP (button 8) to turn the alarm on
while in alarm mode.
Warning:
Do not remove the battery or all time settings
will be lost.

Setting up the hidden camera
Mobile Network Setup
The free app will allow you to remotely view your
video feed on an iOS or Android device.
You can customize your settings to receive
real-time alerts via email or SMS messaging
based on the motion detection settings.
Step 1. Go to your Mobile App Store and install
the free “P2P IPCamera” Application.
Open the application to congure your camera.

Step 2. Make sure the provided
ethernet cable is connected to your router
and the back of your zClock-200w.
Select the “Add Camera” tab from the P2P
app and scan the QR code located in the
back of the camera.
Step 3. Name your camera and enter de-
fault code “000000” and Select OK.
The camera is now online.

Select the “Cameras” tab to customize
your settings.

Changing the Default Password
Select Set Password. In this eld you will enter
the default password in the “Old” eld: “000000”.
Then in the “New” eld, enter desired password
and conrm. Then press “Save”.
*Note: Select the “Back” button
to enter Settings

WiFi Settings
Select your WiFi network and enter
your network’s password.
Then press “Save”.
- Remove the ethernet cable from the back of
the camera.
- Return to the main screen and select
“Reconnect”. Allow 60 seconds for Network
settings to recongure.
- Select the “Back” button and your camera will
be online.

Recommended Event Settings
- Motion Detection: Select “Medium”; press “Save”.
- Notications: Select from the listed options.
Recording Mode Settings
- Selecting “Off” - Camera will not record video.
- Selecting “FULL TIME” - Camera will continuously
record video.
- Selecting “Alarm” - Camera will record based on
motion settings.
SD Card Formatting
The zClock-200w Hidden Cam Alarm Clock will
format your Micro SD
card. Simply press “SD Set” and the Micro SD card
will format.
Time settings are based on the location detected
from your network.

ADVANCED SET UP

Windows Setup
System Requirements: Operating System Windows
2000 / XP /Vista
Browser: Internet Explorer 6.0 or above
IE Browser Settings: It is possible you will have
to enable all ActiveX controls and plugins. If your
camera does not work, follow the instructions
below to enable ActiveX.
Enabling your ActiveX settings
Open Internet Explorer
Select the “Tools” Menu and select “Internet Op-
tions”. Click on the“Security” Tab.
Click the “Custom level...” Button and expand the
“ActiveX Control and Plug-ins” Section
Ensure all options are set to “Enable”.

Conguring Your zClock-200w on a PC
Step 1. Insert the Mini CD in to your PC.
AutoPlay will open. Select “Open Folder”
Step 3. Double-click the “Search IPCam”
application to obtain your IP address.