Zhumell Vista User manual

V
VISTA
ISTA
C
COIN
OIN-O
-OPERATED
PERATED
B
BINOCULARS
INOCULARS
Web: www.zhumell.com 30 E. Superior St.
Phone: [phone] uluth, MN 55802

W
ARNINGS
_Bolt all pieces together to ensure stability.
_o not attach power supply until assembly is completed.
Risk of electric shock.
_When disassembling, disconnect all cables to avoid
breakage or shock.
_Mount only on stable, level ground or platform.
_Secure base to Mounting platform to prevent
injury.
_Mount binoculars in dry area to increase
longevity.
_Maintain a clear pathway around binocu-
lars to prevent user injury.
FEATURES
_Weather Resistant Coating
_AC or Battery Power Selection (12V Battery and 110V power
cord supplied)
_Adjustable Viewing Time Setting (0-50 mins./coin)
_External Interpupillary istance Adjustment
ONE-YEARWARRANTY
THE ZHUMELL WARRANTY
We have designed Zhumell products to be durable and to offer excellent
value. Because we think it is important to stand behind that statement
what follows are the details of our warranty, one of the best warranties in
the industry.
Your Zhumell has a one-year warranty. For the warranty to be valid, the
Zhumell must be registered. This can be done quickly and easily at
www.zhumell.com or by calling: 800.922.2063.
To obtain warranty service to the damaged Zhumell call to speak with a
service representative at 800.922.2063.
When you return your Zhumell to us please send a letter that explains the
problem. This is important. Sometimes the problem is obvious as when we
open a box and the pieces fall out. However, sometimes Zhumell owners
are particular (that is why we love you) and a flaw that you have noticed
may be hard to find by our technician. A letter will speed up the warran-
ty process and save a phone call. (Oh, yes, please include your phone num-
ber and an address!)
We may have improved or changed our Zhumell products from the
time you first obtained yours, therefore it is our option to repair or
replace the Zhumells you sent us. (Please note that the maximum limit
of liability for losses or damage from any cause shall be the price paid
for the Zhumell. )
REPAIR CHECKLIST
Box your Zhumell securely.
I.
Include a note explaining the reason the Zhumell needs repair.
II.
_Coin-operated, Always Open, and service opera-
tion modes Include your daytime phone number.
III.
_Rechargeable 12V Battery for Remote Include an address for returning your Zhumell to you.
Mounting Locations. IV.
_Tamper-resistant Locking Coin Housing Include shipping charge amount (from service representative).
V.
_Multi-coated Optics We recommend that you send your unit to us by way of UPS or
FedEx. This provides a tracking number should your unit
become lost or damaged.
REPAIR PROCESS

C
OIN SETTING
S
PECIFICATIONS
OPTICAL
SETTING COIN SIZE The shutter release mechanism uses a tem-
plate coin to determine the size coin needed to open the shutter. In
order to set the appropriate coin size, a coin of the type to be used to
activate the shutter (eg. a quarter or token) must be inserted in the
template coin slot. To insert a coin into the template coin slot, first
remove the coin activation control by loosening the four bolts which
hold the coinslot faceplate on and disconnecting the communication
cable from the back of the coin activation control. Once coin activa-
tion control is removed, lift the template coin sensor (the plastic piece
above the template coin with wires attached to it) away from the
template coin slot. Remove the existing template coin and replace
with the type coin which will be used to activate the shutter.
Reinstall the coin activation control and tighten all bolts and the unit
should be ready for use.
25x100 40x100
POWER 25x 40x
EXIT PUPIL 4mm 2.5mm
EYE RELIEF 14mm 8.2mm
FIEL OF VIEW 43.6m@1000m 26.2m@1000m
RESOLUTION 2.4 2.4
FOCUS RANGE 30m ~ ∞60m ~ ∞
MECHANICAL
ORIENTAL RANGE: 0~315°
UP RANGE: 0~30°
OWN RANGE: 0~45°
EYEPIECE ISTANCE RANGE: 58~72mm
SIZE OF BINOCULARS: 550x250x240mm
WHOLE HEIGHT: 1.5m (5ft.)
WHOLE WEIGHT: 84kg (185lbs.)
COIN IAMETER RANGE: 18~31mm
COIN THICKNESS RANGE: 1.2mm~3.0mm
ELECTRICAL
POWER SUPPLY 85~265VAC (47~440HZ)
C12V±1.5V
LOW C POWER IN ICATION: BELOW 10.5V
ENVIRONMENTAL
OPERATING ENVIRONMENT: 14°F~104°F (-10°C~40°C)

MODE
I
NSTALLATION
T
IMER SETTINGS
ASSEMBLY
1
Mount pier to base by inserting raised ring on pier into base open-
ing and securing with M10X20 mounting bolts (included) through
pre-drilled holes. Tighten bolts to ensure stability.
2
Secure base to mounting platform where unit will be used. (See
base installation below)
3
Attach mounting plate to top of control box with raised ring fac-
ing up. Secure mounting plate to control box using M2.5X5 hex
bolts (included). Tighten bolts to ensure stability.
4
Mount binoculars by setting them atop the mounting plate so
that mounting plate ring is centered in recess on the binocular
base and control cord enters the control box through the center hole
of the mounting plate. Attach binoculars to mounting plate using
M6X20 bolts (included). Tighten bolts to ensure stability.
5
Thread shutter control cable from binoculars onto shutter connec-
tion being careful not to bend connection prongs.
BASE INSTALLATION
Mount the pier base on stable, level ground using the included
mounting bolts. Anchor bolts into concrete or steel base which is
either anchored securely to the ground or a minimum of 10 in diame-
ter to ensure stability. If improperly mounted, the unit may tip.
RANGE Range adjusts the timer dial to longer or shorter ranges of time
from which to shoose. To choose between smaller increments of time,
use a small screwdriver to turn the range setting counterclockwise.
For larger increments of time, turn the range setting clockwise.
Mode allows you to access the different operating modes for
the Vista. The indicator window directly above the mode dial shows
what operating mode the Vista using a signifying letter. Turn the
mode control to the desired setting using a small screwdriver.
TIMER DIAL Once the desired range has been set, the timer dial
allows you to set the amount of time that the shutter will remain open
once actuated by a coin. The lower, central window states what
increment of time the numbers stand for.
MODE SETTINGS
SF, OS, OF1 - Standard Operating
Modes: Shutter is opened when coin is
inserted.
FL, FO - Flash Modes: shutter is alter-
nated between open and closed accord-
ing to time setting.
ON, OF - Open Modes: Shutter is
opened and remains open until
switched to a different mode.
OC - Open/Close Mode: Shutter is
opened and closed quickly at end of
time setting.

SHUTTER INFO GENERAL USE
SHUTTER ACTIVATION To open the shutter for
viewing, place coin (quarter unless otherwise set)
in coinslot. Shutter will remain open for the amount
of time set internally (normally 30sec. to 1 min.).
COIN RETURN To return a coin just inserted, press the silver coin
return button just beneath the coin slot immediately after inserting
coin. the coin will be returned in the slot below the coin return but-
ton.
SETTING SHUTTER TIME To set the amount of time you would like
the shutter to stay open for each coin, use the settings on the control
panel timer setting. Using the range setting and timer dial, set the
shutter to be open from 0 - 50 mins.
REPLACING FUSE To replace the control box fuse, unscrew fuse hous-
ing by turning counterclockwise. Pull the old fuse out of the fuse
housing and replace with a new 0.75Amp fuse. Replace fuse housing
in socket and tighten by turning clockwise. Be sure to use a 0.75Amp
fuse, as a higher powered fuse may result in electrical damage to the
control panel
INTEPUPILLARY DISTANCE
(IPD) ADJUSTMENT
To adjust the Interpupillary
istance (IP ) between
the barrels, grasp the ridged
front of the eyepieces and
spin inward or outward.
The IP should be set so
that one image circle is seen
and viewing is comfortable
for the user.
ELEVATION ADJUSTMENT
JUSTMENT
ELEVATION AJUSTMENT
front of the eyepieces and
IP A
To adjust the elevation
height of the binoculars,
place hands underneath
the binocular body in
lift up or pull down. The
binocular housing should
swivel up or down. The
elevation adjustment may
be a litttle stiff at first,
but should loosen up
with use.
area of each barrel just in

COIN BOX LEGEND CONTROLS LEGEND
COIN ACTIVATION CONTROL Contains the switch which actuates
the shutter to allow viewing when a coin is inserted in the coin slot.
COIN DROP BOX Removeable box in which coins are collected.
BATTERY Removeable 12V battery provides an optional power
source for mounting away from AC power sources.
CONTROL BOX Contains the optional settings which allow for view-
ing time adjustment and power source selection as well as the pri-
mary fuse and on/off switch.
DOOR Key-locking door
protects the mechani-
cal controls inside of
the coin box.
CURRENT SELECTOR
Allows you to choose
between 115V AC or 12V C
power source.
POWER SWITCH
Allows you to turn power on
or off for the unit.
VOLTAGE METER
isplay the amount of volt-
age being received by the
control panel.
SHUTTER CONNECTION Three pronged socket into which the
shutter control cable connects to the control panel.
POWER CONNECTION Four pronged socket into which the power
cable connects to bring power from the chosen power source to the
control panel.
TIMER SETTING Allows you to set the amount of time the shutter
will be open once actuated by a coin and controls all other shutter
settings.
FUSE SOCKET Houses one replaceable 0.75Amp fuse to protect
control panel electronics from power overload.