Zigen ZIG-POC-70U User manual

1
ZIG-POC-70U
HDBaseT HDMI Extender

2
Important Safety Instructions
1. Do not use this product near water.
2. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
3. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
5. Only use attachments/accessories specified by the manufacturer.
6. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
7. Unplug this apparatus during lightning storms or when unused for long periods of time.
8. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
9. Batteries that may be included with this product and/or accessories should never be
exposed to open flame or excessive heat. Always dispose of used batteries
according to the instructions.

3
Warranty Information
Powered Product Warranty
Zigen warrants its powered products against any defects in materials and
workmanship for a period of three years from the date of invoice. Touchscreen displays
carry a one year parts and labor warranty. If a malfunction occurs during the warranty
period, Zigen will repair or replace a product to its original operating condition. A
return authorization number must be obtained from Zigen before products are
returned for service.
Non-Powered and Cable Products - Lifetime Limited Performance Warranty
Zigen warrants that its non-powered products and cable products will be free from
defects in material and workmanship for as long as you or your customer owns the
product. All Zigen non-powered products and cables are designed and engineered to
meet and exceed performance specifications. If, at anytime, the product fails due to
manufacturer defect, Zigen will repair or replace the product to ensure that it meets
original performance specifications. Reduced performance due to normal wear and tear,
or damages caused by misuse or negligence will not be covered. Zigen will test and
evaluate all non-powered and cable products claimed defective. Products must be
shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return
Merchandise Authorization (RMA) number from Zigen. This statement of policy is in
lieu of any other policy expressed or implied and no representative or person is
authorized to assume any other liability or adopt any other policy for Zigen without our
written consent.
Return Policy
If you would like to return a Zigen product, it can be done within 30 days of purchase for
a full refund, less shipping and handling. Zigen will not be responsible for shipping and
handling of product returns. Returns will only be accepted of products with proof of
purchase, products in the original packaging with zero to minimal use and a Return
Merchandise Authorization RMA number provided by Zigen.

4
Contacting Zigen
Technical Support
Tel: [phone]
Fax: [phone]
8:00AM - 5:00PM (PST)
Email
[email protected]
Web
www.zigencorp.com
Mailing Address
Zigen Corp.
c/o Customer Service
16135 Wyandotte Street
Lake Balboa CA 91406
USA

5
Features
•Autonomous EDID management
•HDBaseT technology
•Supports 18-Gbps
•Supports HDR-10
•Supports HDMI 2.0
• HDCP 2.2 compliant
• USB 2.0 (3-port hub)
•POC Technology
•Supports CEC pass-through
•Supports Bi-directional IR
•Supports Bi-directional RS-232
•Extend 1080p signal up to 70 meters/ 230 ft.
•Extend 4K/60Hz 4:4:4 signal up to 40 meters/ 130 ft.

6
Function
HDMI Connector
HDMI A-Type Female x 1
RJ-45 Connector
RJ-45 Jack x 1
RS232 Connector
DB9 Female x 1
IR IN
3.5ψ Stereo Jack x 1
IR OUT
3.5ψ Stereo Jack x 1
LED
4
6
USB-2.0
USB-B x 1
USB-A x 3
DC Jack
24-v
24-v
Max. Resolution
4K@60Hz / 4:4:4
Cable Distance
4K/60Hz 40 m (Max.)
1080P/60Hz 70 m (Max.)
Power Adapter
(Min.)
DC 24-V with lock
Power consumption
20W (MAX)
Operating
Temperature
0 ~ +50˚C
Storage
Temperature
-10 ~ +50˚C
Relative Humidity
0% ` 90%
External Power
Supply
Input: 100VAC~240VAC, 50/60Hz; 24VDC 1.25A
Enclosure
Aluminum
Weight
Tx
185g
Rx
190g
Dimensions
(LxHxW)
168.0W x 21.4H x 84.0D mm
Specifications

7
Packing List
© 2019 Zigen, Corp. All Rights Reserved.
All trademarks are the property of their respective owners.
Zigen, Corp. Reserves the right to make changes in the hardware, packaging
and any accompanying documentation without prior written notice.
The ZIG-POC-70U is packaged with the following items:
1 x Transmitter
1 x Receiver
1 x 24V DC Power Adaptor
1 x IR Receiver
1 x IR Emitter
1 x User Manual
If any of these products are not present upon first opening of the package,
please contact Zigen or your reseller.

8
Table of Contents
Introduction
Introduction …………………………………………..………………………………… 9
Transmitter Front Panel ........................................................................................ 10
Transmitter Back Panel ......................................................................................... 11
Receiver Front Panel ............................................................................................. 12
Receiver Back Panel ............................................................................................. 13
Get Started
Installation ………………………………………………….…………………………… 14
System Diagram ……………………………………………………………………….. 15
Connection
IR Receiver Cable Directions ............................................................................... 16
HDMI Connector Signal Pin Out ........................................................................... 17
RJ-45 Wiring Information & Coding ...................................................................... 18

9
Introduction
Introduction
The ZIG-POC-70U is an ultra-thin HDMI2.0 and USB 2.0 Extender set. This extender set
consists of transmitter and receiver. It extends 1080p/4K HDMI with USB-2.0 and bi-
directional IR/RS-232 signal over single CAT-6a cable up to 70m /40m using (PoC). This
extender is equipped with visually lossless video compression technology called (DSC) to
ensure HD lossless transmission of HDR-10 and 4K@60Hz/4:4:4 over CAT-6a cable.
Introduction

10
1 USB LINK - blue LED light
2 POWER - blue LED light
3 LINK - blue LED light
4 VIDEO- blue LED light
Transmitter Front Panel
Introduction

11
1 24-V DC
Support bi-directional PoC.
2HDBT OUT
Connect using a CAT-6a cable.
3USB HOST
Connect Host PC to be controlled.
4IR OUT
Connect IR emitter to send IR signal to control the source device.
5IR IN
Connect IR receiver to receive IR signal from IR remote to control far-end display device.
6 RS-232
Connect the RS232 control device (e.g. PC) or a third-party device to be controlled.
7 HDMI IN
Connect to HDMI source.
Transmitter Back Panel
Introduction

12
Introduction
Receiver Front Panel
1 USB 1 LINK - blue LED light
2 USB 2 LINK - blue LED light
3 USB 3 LINK - blue LED light
4 POWER - blue LED light
5 LINK - blue LED light
6 VIDEO - blue LED light

13
Introduction
Receiver Back Panel
1 24V DC
Support bi-directional POC.
2HDBT IN
Connect using a CAT-6a cable.
3USB 3
Connect mouse, keyboard or other USB device to control the Host PC.
4USB 2
Connect mouse, keyboard or other USB device to control the Host PC.
5USB 1
Connect mouse, keyboard or other USB device to control the Host PC.
6 IR OUT
Connect IR emitter to send IR signal to control the display device.
7 IR IN
Connect IR receiver to receive IR signal from IR remote to control far-end source device.
8 RS-232
Connect the RS232 control device (e.g. PC) or a third-party device to be controlled.
9 HDMI OUT
Connect to HDTV Display
Introduction

14
Get Started
Installation
1. Be sure to turn OFF source and TV.
2. Connect the HDMI extension cable between HD Source and HDMI In port of the
Transmitter.
3. Connect the HDMI extension cable between the HDTV and the HDMI Out port of the
Receiver.
4. Connect Cat-6a cable between the Transmitter Link port and the Receiver Link port of
the Receiver.
5. Connect the Power adapter to the Receiver or Transmitter and power up the extender
6. Turn on the HD source and HDTV.

15
Get Started
System Diagram

16
IR Receiver Cable Directions
Plug the IR receiver into the ZIG-POC-70U-Tx “IR IN” port and place the IR receiver so
you can point to it easily with your IR remote controller.
IR Emitter Directions:
Plug any third party IR emitter into the ZIG-POC-70U-Tx “IR OUT” port and place the IR
sensor directly on the IR window on the front panel of the device you intend to control.
Connection

17
Pin
Signal
Pin
Signal
1
TMDS Data 2+
11
TMDS Clock Shield
2
TMDS Data 2 Shield
12
TMDS Clock -
3
TMDS data 2 -
13
CEC
4
TMDS Data 1+
14
Reserved (N.C. on
device)
5
TMDS Data 1 Shield
15
SCL
6
TMDS Data 1 -
16
SDA
7
TMDS Data 0+
17
DDC/CEC Ground
8
TMDS Data 0 Shield
18
+5 power
9
TMDS Data 0 -
19
Hot Plug Detect
(HPD)
10
TMDS Clock +
HDMI Connector Signal Pin Out
Connection

18
Conductor
Identification
RJ-45 Plug Pin
Assignment
Color Code for
Conductor
Pair 1
5
White-Blue
4
Blue
Pair 2
1
White-Orange
2
Orange
Pair 3
3
White-Green
6
Green
Pair 4
7
White-Brown
8
Brown
RJ-45 Wiring Information & Coding
Looking into connector
Connection

19
One-to-One System Connection Example
Connection