ZINK hAppy PRINT User manual

QUICK START GUIDE

Congratulations
on your new
ZINK hAppy™!
In this guide we’ll get you
set up in no time.
If you have any questions,
call us at 877-71 1-ZINK (9465)
or visit us online
at ZINK.com.

3
What’s in the Box
ZINK hAppy™
AC Power Adapter
1/2" zRoll™
(Green)
Cleaning zRoll™
(White, Non-Printing)
The Cleaning zRoll
is not for printing.
When inserted, it will
start a cleaning cycle.
Use if streaks appear
or after every 20-30
prints for best
performance.

4
Get to Know Your ZINK hAppy™
zRoll™ Lock Button
Power Button
Wi-Fi® Modes
Print Output Slot
Swipe-to-Cut Groove
Swipe finger firmly through
here to cut paper.
Hold for 1–2 seconds
and release to
power on or off.
Micro
USB Port
AC Adapter Port
UNDERNEATH
Press the button for 1-2
seconds to toggle Wi-Fi
modes.
Press the button for 1-2
seconds to unlock/relock a
zRoll.

5
What You Need
AND
ZINK hAppy™
AC Power Adapter
1/2" zRoll™
High-Speed
Internet
Wireless Router
(Wi-Fi®)
Android™ smartphone
or iPhone®
Android™ tablet
or iPad®
Remove the tab
before inserting
into hAppy™.

6
1. Insert the AC power adapter
into the port on the BOTTOM
of your ZINK hAppy™.
STEP 1
Plug In and Power On Your ZINK hAppy™
2. Connect the two sections
of the AC power adapter
and plug into a wall outlet.
AC ADAPTER
Run cord under
the two notches
inside the groove.
AC Power Adapter Port

7
3. Press and hold the
power button located
on the bottom
corner of your
ZINK hAppy™
for 1–2 seconds
and release. It takes
about 30 seconds
for your hAppy™
to power up.
The lights in the swipe-to-cut
groove will blink while the
printer is initializing. The Wi-Fi
and zRoll Lock buttons will then
flash. Listen for the whirring
sounds to finish before loading
or unloading a zRoll.

8
2. Hold your zRoll by the two finger
grips on each side and insert it
into the back of your hAppy™.
STEP 2
Load Your zRoll™
1. Unpack the zRoll and
remove the pull-tab from
the top.
Pull-Tab
Finger Grip
Remove the tab
before inserting
into hAppy™.

9
1/2
13mm
P
4. Your hAppy™ will eject a small
piece of zRoll to complete the
loading process.
3. Line up the V-shaped ridge
on your zRoll with the notch
on your ZINK hAppy™ and
push the zRoll until you
hear a slight click.
The zRoll Lock button
changes from blinking to
solid white when loading is
complete. Always press the
zRoll button to unlock your
zRoll before removing.

10
STEP 3
Download the ZINK Design & Print Studio™ App
1. On your tablet or smartphone tap the App Storesm or
Google Play™ icon.
2. In the search box type the ZINK Design & Print Studio.
3. Look for the ZINK hAppy™ icon and
tap to download.
4. After download is complete, tap the hAppy™ icon to
open the app and follow the on-screen instructions.
ZINK Design & Print Studio
ANDROID APP ON