ZINK hAppy PRINT User manual

hAppy™
QUICK START GUIDE
PRINT

Congratulations on your new
ZINK hAppy Print™ —the world’s first
smart, happy, little, full-color, zero-ink,
app-powered printer.
In this guide we’ll get you
designing and printing in no time.
If you have any questions,
call us at 877-711-ZINK
or visit us online at zink.com.

3
What’s in the Box
hAppy
Print™
Power Adapter
Cleaning
zRoll
USB Cable
1/2h" zRoll™

4
zRoll
Loading Slot
Get to Know Your hAppy Print™
zRoll
Unlock Button
Power
Button
Micro
USB port
Wi-Fi Button
Print
output slot
Swipe-to-cut

5
•
Flashing white when
cassette is unlocked
or there is no cassette
detected
•
Solid white when
cassette is locked
and ready to print
Swipe-to-Cut
Lights flash left to right
when ready to cut
Wi-Fi Button
Tap to switch between
broadcast mode (white) and
Wi-Fi connect mode (blue)
zRoll
Unlock Button
•
Flashing white: searching
for device network
•
Solid white: Wi-Fi is
broadcasting and ready
to be connected with
an iPad or tablet
•
Solid blue: connected
to home network
• Flashing blue: searching
for your home network

6
What You Need
AND OR
hAppy
Print™
Power
Adapter
1/2" zRoll
High-speed
Internet
Wireless
Router
(Wi-Fi)
Android smartphone
or iPhone
Android tablet or iPad

7
OR
If you have an iPhone or an iPad: just tap
the App Store icon and search the store
for ZINK Design & Print Studio.
If you have an Android phone or Android
tablet: tap the Google Play or Play Store
button and search for ZINK Design &
Print Studio.
STEP 1
Download the ZINK Design & Print Studio™ App
1. Take out your tablet or smartphone.
1. Tap the App Store or Google Play icon.
2. In the search box type in ZINK Design
& Print Studio.
3. Look for the hAppy™ icon
and tap to download.
You can just scan
the QR code.
ZINK Design & Print Studio

8
1. Insert the power adapter into
the port on the underside of
your hAppy Print.
3. Press the power button
located on the bottom
corner of your hAppy—
wait for your hAppy to
whir up.
STEP 2
Plug In and Power On Your hAppy Print
2. Connect the two sections
of the power adapter and
plug it into a wall outlet.
Run cord under notches
inside groove.
Wi-Fi:
should be solid white

9
STEP 3
Load Your zRoll
R
R
1. Unpack and remove
the pull-tab from the
top of the zRoll.
2. Hold your zRoll by the two
finger grips on each side and
insert it into the back of your
hAppy Print.
3. Line up the V-shaped ridge
on your zRoll with the notch
on your hAppy Print—press
the zRoll until you hear a
slight click.
Finger
grip
Pull-tab

10
1. Take out your tablet or smartphone.
2. Tap the settings icon on you smartphone or tablet. It's usually found in the app
tray of the device.
3. Go to Wi-Fi settings and select the “hAppyPrinter” wireless network.
STEP 4
Connect Your Smart Device to Your hAppy