Zippity ALL AMERICAN PRIVACY SCREEN User manual

1www.zippity-outdoor.com
ASSEMBLY
INSTRUCTIONS
PRIVACY SCREEN
45 MIN approximate assembly time
for 2 screens
ALL AMERICAN
6935 Reames Rd. Ste. K. Charlotte, NC 28216
@[e-mail]
704 892 5222 / 877 234 6196
zippity-outdoor.com
Gr
ound
41 in Gate Width
42 in Gate Opening
2 in
38
in
2 in
5 in

2www.zippity-outdoor.com
GENERAL INFORMATION
IMPORTANT
• Please read through before starting assembly.
• Important: Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’for unobstructed assembling.
• You should not need to use excessive force when assembling components.
MISSING OR DAMAGED PARTS?
CALL US FIRST SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur.
If you discover any missing, damaged or defective parts, please contact our customer service department.
EMAIL: [e-mail]
PHONE: [phone]
Customer service agents are available to take calls weekdsays from 8am-5pm EST.
Leaving a detailed message will ensure a call back.
To help you quickly and accurately, please have reference item number ZP19008 and the specic part name which can be
found on the next page. It is helpful if you can provide the batch lot which is a stamped number on the end of the box.
NEED ASSEMBLY HELP?
If you are having problems with the assembly or installation of this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222/877-234-6196.
NEED TO RETURN?
If for some reason you need to return this product, please allow us to help resolve your issues rst. If you still decide to
return the product, you will need to intitate the return from the company you originally purchased from.
@

3www.zippity-outdoor.com
STEP 1 LAY OUT MATERIALS
Box Contents
ALL AMERICAN PRIVACY SCREEN (2 PACK) COMPONENTS
TOOLS YOU WILL NEED
Top Gate Brackets (2)
Vertical Stiles (2) -
1 ½” x 3 ½“ x 18 ⁄”
Top Rail (1) - 1 ½” x 3 ½” x 40 ¾”
1-1/4“ Self-Augering
Stainless Steel Screw (4)
1 ¼” Self-Augering Stainless
Steel Black-Headed Screws (32)
⁄” Self-Augering Stainless Steel
Black-Headed Screws (32)
Hinges (2)
Latch Catch (1)
Latch Finger (1)
Bottom Gate Brackets (2)
Bottom Rail (1) - 1 ½” x 3 ½” x 40 ¾”
Cordless Drill
Level
Picket 1 (2) - ⁄” x 2 ¾“ x 36 ½”
Picket 2 (2) - ⁄” x 2 ¾“ x 34 ⁄”
Picket 3 (2) - ⁄” x 2 ¾“ x 32 ¾”
Picket 4 (2) - ⁄” x 2 ¾“ x 31 ½”

4www.zippity-outdoor.com
STEP 2.1 STEP 2.2
STEP 2.3
STEP 3.1 STEP 3.2
ASSEMBLE THE GATE FRAME
BOTTOM AND SIDES
Insert the bottom rail all the way until it
bottoms out inside one of the bottom gate
bracket as illustrated.
ASSEMBLE THE GATE FRAME
BOTTOM AND SIDES
Insert the bottom rail all the way until it
bottoms out inside the opposing bottom
gate bracket as illustrated.
ASSEMBLE THE GATE FRAME
BOTTOM AND SIDES
Insert vertical rails. They will bottom out
against bottom rail.
ASSEMBLE THE GATE FRAME TOP
& ATTACH TO SIDES
Insert top rail all the way until it bottoms out
inside top gate bracket.
ASSEMBLE THE GATE FRAME TOP
& ATTACH TO SIDES
Insert rail all the way until it bottoms out
inside top gate bracket.
Last routed hole on each end of rail should
align itself with routed hole in bracket.
*
In
s
er
t
full
y to
t
hi
s
p
oi
nt
.
Note: Orientate the rail with
routed holes facing up.
*
I
ns
ert
f
u
ll
y
to thi
s
p
o
i
n
t
.
*Insert Fully to this point
*Insert Fully to this point
Note: Opening on top gate bracket
In
se
rt
ful
ly
t
o
th
i
s poin
t
In
se
rt
ful
ly
t
o
th
i
s poin
t

5www.zippity-outdoor.com
STEP 3.3
STEP 4.1
STEP 3.4
ASSEMBLE THE GATE FRAME TOP
& ATTACH TO SIDES
Slide top gate brackets with top rail attached
down over the vertical posts.
SCREW GATE FRAME/BRACKETS
Fasten brackets into rails as necessary.
ASSEMBLE THE GATE FRAME TOP
& ATTACH TO SIDES
Completely assembled gate frame shown.
Insert Fully to thispoint
Insert Fully to this point

6www.zippity-outdoor.com
STEP 6.1 FASTEN GATE HINGES
Fasten gate hinges onto the gate brackets with (8) 1¼”
black-headed screws.
STEP 5.1 STEP 5.2
INSERT PICKETS INTO GATE FRAME
Insert pickets through top rail down into bottom rail.
INSERT PICKETS
INTO GATE FRAME
Completed gate with frame
shown.
Note: Each picket is
numbered
Locking Tabs
1

7www.zippity-outdoor.com
STEP 7.1
STEP 7.3
STEP 7.2
POSITION, ADJUST & ALIGN GATE/
SECURE HINGES TO POSTS
Use temporary spacers OR blocks to rest the
gate on during alignment and installation.
POSITION, ADJUST & ALIGN GATE/
SECURE HINGES TO POSTS
Open the gate and fasten the hinges to the
post from the inside with (16) 1¼”black-
headed screws.
Note: If your internal metal pipe ends up ush to the
inside corner of vinyl post, you will need to pre-drill
the holes for the screws to penetrate the pipe.
POSITION, ADJUST & ALIGN
GATE/SECURE HINGES TO POSTS
Fasten hinges to the post with (8) 1¼”
black-headed screws.

8www.zippity-outdoor.com
6935 Reames Rd. Ste. K. Charlotte, NC 28216
@[e-mail]
704 892 5222 / 877 234 6196
zippity-outdoor.com
STEP 8.1 ALIGN & INSTALL LATCH
Align and fasten the gate latch to t and
function with the gate nger using the (6) ⁄”
black-headed screws.