Zippity ZP19002 User manual

WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY INSTRUCTIONS ZP19002
WWW.ZIPPITY-OUTDOOR.COM
VER. 042921
ZP19002
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NEWPORT
VINYL PICKET
FENCE WITH POST

PIPE ANCHOR KIT

Finishing Post
Kit (ZP19003)
sold separately.

WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY INSTRUCTIONS
ZP19002
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 8am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19002
on page 5. It is helpful if you can provide the batch lot which is a
stamped number on the end of the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please

return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY INSTRUCTIONS ZP19002
1. 

2.

3. 
4. O

5. If your yard is steeply pitched or is very uneven, you may need to stair-step your panels as
illustrated below. Post heights can be trimmed down as necessary.
Warning: 

this fence. Your post will not be long enough to accommodate this slope.
minimize the gap on the lower side.
TIPS:

WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY INSTRUCTIONS
ZP19002
Ground
70 3/8 in
72 in
2 in
2 15/16 in
68 1/2 in
6 in
18 1/2 in
24 in
4 in
36 in
33 1/2 in
22 7/8 in
3 in


20 3/4 in

WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY INSTRUCTIONS ZP19002
STEP 1: LAY OUT MATERIALS
A B
ED
G H
F
C
Note: Top rail
has picket
holes on both
sides.
Picket (11)
⅞” x 3” x 29¾”
Post (1)
2” x 3½” x 38⅝”
Top Rail (1)
1½” x 3½” x 68¼”
(1)
1½” x 3½” x 68¼”
Pipe Anchor (1)
1⅝” x
44¾” ¾” Self-Drilling Stainless Steel Screw (24)
Rail Bracket (4)
Post Cap (1)

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19002
Try and drive the pipe anchor as level as possible. Check level

is usually established, and you cannot manually pull the pipe back
to make it level.
BEST
anchor into the ground:
GOOD
BETTER
Hammer
DO NOT USE
STEP 2: INSTALL PIPE ANCHORS
STEP 2.1

(G)

G
STEP 2.2
Note: Check level
in both direcons.

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS ZP19002


Orient the Post (C) correctly with tabs at the
top, and slide the post over the pipe anchor and
into the ground.
Using a wood block (or something to protect the


on the pipe anchor. Repeat for the second post.

around the base of the pipe anchor. This will
allow the post to easily insert itself into the

Step 3.1 is only to be completed if the
ground is hard.
70 ¼in.
72in.
STEP 3: INSTALL POST OVER PIPE ANCHOR
C
STEP 3.1 STEP 3.2
STEP 3.3
STEP 2.3

WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY INSTRUCTIONS
ZP19002
1. 

out of the post.
2. Remove the vinyl burrs from the post and screw.
3. Slowly drive the screw with force into the pipe anchor.
1. Use a level to straighten the post.
2. Drive a second hex head tek screw into the top of the post using

Adjust unl level.
3
Step 4 is only to be completed if you are concerned that
someone may pull your fence posts out of the ground.
STEP 4  SECURE POST TO PIPE ANCHOR
1 2 3
1 2
Top View
STEP 4.2
STEP 4.1

WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY INSTRUCTIONS ZP19002
Slide another rail bracket
over the opposite end of the
(F), and slide

the rail bracket installed in

F
Install one Rail Bracket
(D)
Self-Drilling Stainless Steel
Screws (H). The rail bracket


STEP 5: INSTALL FENCE PANEL
STEP 5.1

D
H
STEP 5.2

WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY INSTRUCTIONS
ZP19002

determine where to install the opposing rail
bracket, and mark the height.


self-drilling stainless steel screws.


rail bracket as illustrated below, and install
the top rail brackets.

in order to align the pickets, and slide the Top Rail
(E)
stainless steel screws to secure brackets to
both rails.
STEP 5.3 STEP 5.4

E
STEP 5.5 STEP 5.6