A B C D
1312
See more angle tray charts on pages 14 & 15!
TIP: Use the siphon to add
juice to the molds when
The Quick Pop Maker is
tilted at a sharp angle.
The Angle Tray
The angle tray tilts The Quick Pop Maker at various
angles to create a wide array of angled Quick Pops.
To make a fun angled pop, follow the instructions below
that correspond with the illustration on the right.
A) Insert pop sticks into the molds. Set The Quick Pop
Maker to lean on the short side of the angle tray, then
partially fill the mold cavity with juice.
B) Wait until that portion is frozen, then set the bottom
of The Quck Pop Maker to sit on the wider surface of
the angle tray and pour a different colored juice.
C) Wait until the second portion is frozen, then set The
Quick Pop Maker flat and pour the final juice until it
reaches the fill line.
D) Wait until the pop freezes, then remove it and enjoy!
