Zonet ZSR4134WS User manual

Copyright Statement
is the registered trademark of Zonet Technology Inc. All the products
and product names mentioned herein are the trademarks or registered trademarks of
their respective holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Zonet Technology Inc. ithout the permission of
Zonet Technology Inc., any individual or party is not allowed to copy, plagiarize, imitate
or translate it into other languages.

Table of Contents
Chapter 1 Introduction......................................................................... 1
elcome.............................................................................................. 1
Contents of Package .............................................................................. 1
System Requirement ............................................................................. 1
Getting to Know Your ZSR4134 S .......................................................... 2
Chapter 2 Hardware Installation......................................................... 4
Chapter 3 Connect Your ZSR4134WS ................................................... 6
How to Check the Network Connection..................................................... 9
Chapter 4 asic Configurations ...........................................................10
How to Access the eb-based Configuration Utility ..................................10
Setup izard.......................................................................................11
Chapter 5 Advanced Settings ..............................................................15
LAN Settings .......................................................................................15
AN Settings ......................................................................................16
MAC Address Clone ..............................................................................20
DNS Settings .....................................................................................20
Chapter 6 Wireless Settings ................................................................21
Basic Settings......................................................................................21
ireless Security Settings .....................................................................23
Advanced ireless Settings ...................................................................27
PS Settings.......................................................................................28
DS Settings ......................................................................................29
ireless Access Control ........................................................................30
ireless Connection Status ...................................................................31
Chapter 7 DHCP Server .......................................................................32
DHCP Server .......................................................................................32
DHCP Server List & Binding ...................................................................33
Chapter 8 Virtual Server......................................................................34
Port Range Forwarding..........................................................................34
DMZ Settings.......................................................................................35
UPnP Settings......................................................................................35
Chapter 9 Traffic Control ...................................................................36

Chapter 10 Security Settings...............................................................37
Client Filter .........................................................................................37
URL Filter............................................................................................38
MAC Filter ...........................................................................................39
Prevent Network Attack ........................................................................39
Remote EB Management ....................................................................40
an Ping ............................................................................................40
Chapter 11 Routing Settings ...............................................................41
Routing Table .....................................................................................41
Chapter 12 System Tools.....................................................................42
Time Settings ......................................................................................42
DDNS .................................................................................................42
Backup/Restore ...................................................................................43
Upgrade..............................................................................................43
Restore to Factory Default Settings ........................................................44
Reboot................................................................................................44
Change Password.................................................................................45
System Log .........................................................................................45
Appendix 1 Product Features & Specifications ..................................46
Appendix 2 Troubleshooting...............................................................48

1
Chapter 1 Introduction
Welcome
Thank you for purchasing Zonet ZSR4134 S – 802.11n wireless broadband
router! This high cost-efficiency router is the best choice for Small office / Home
office users, all computers and network devices can share a single xDSL / cable
modem internet connection at high speed. Easy install procedures allows any
computer users to setup a network environment in very short time - within
minutes, even inexperienced. hen the number of your computers and
network-enabled devices grow, you can also expand the number of network slot
by simple attach a hub or switch, to extend the scope of your network!
All computers and IEEE 802.11b/g/n wireless-enabled network devices
(including PDA, cellular phone, game console, and more!) can connect to
ZSR4134 S without additional cabling. The MIMO technology also gives you
the highest speed of wireless experience ever! ith a compatible wireless card
installed in your PC, you can transfer file for up to 300Mbps! The radio coverage
is also doubled, so don’t worry if your office or house is really big!
Moreover, the user-friendly Setup izard on the installation CD can assist you
to set up ZSR4134 S easily. It also can be managed or configured through
Local/Remote easy-to-use eb-based utility.
Contents of Package
One ZSR4134 S
One CD w/User Manual
One Quick Installation Guide(English)
One Quick Installation Guide(Spanish)
One Cradle
One Power Adapter
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
System Requirements
Internet connection, provided by xDSL or cable modem with a RJ-45
Ethernet port.
Computer or network devices with wired or wireless network interface card.
eb browser (Microsoft Internet Explorer 6.0 or above, Firefox 2.0 or
above).
An available power socket (100–240V, 50/60Hz)

2
Getting to Know Your ZSR4134WS
Top Panel
LED Indicator
Status Description
PO ER ON ZSR4134 S is switched on and correctly powered
SYS Flashing Indicates the system works normally.
ON Indicates AN port is connected
AN Flashing Indicates AN activity (transferring or receiving
data)
LAN Flashing Indicates the wireless signal is OK.
ON Indicates LAN port is connected
LAN(1/2/3/4) Flashing Indicates LAN activity (transferring or receiving
data)
PS Flashing Indicates ZSR4134 S is negotiating with PS
clients in PS Mode (PBC or PIN).

3
Rear Panel
Item Name Description
Antenna These antennas are 3dBi dipole antennas.
PO ER Power connector, connects to power adapter
AN ide Area Network ( AN / Internet) port.
1-4 (LAN Ports) Local Area Network (LAN) ports 1 to 4
RESET/ PS
Reset ZSR4134 S to factory default settings (clear all
settings) or start PS function. Press this button and hold
for 7 seconds to restore all settings to factory defaults,
and press this button for 1 second to start PS function.

4
Chapter 2 Hardware Installation
Please follow the following instruction to build the network connection between
your ZSR4134 S and your computers, network devices:
1. Connect all your computers, network devices (network-enabled consumer devices
other than computers, like game console, or switch / hub) to the LAN port of
ZSR4134 S.
2. Connect the power adapter to the wall socket, and then connect it to the “Power”
socket of ZSR4134 S.

5
3. Connect your xDSL / cable modem to the AN port of ZSR4134 S by Ethernet
cable.
4. Please check all LEDs on the top panel. PO ER LED should be steadily on, AN and
LAN LEDs should be on if the computer / network device connected to the
respective port of ZSR4134 S is powered on and correctly connected. If any LED
you expected is not on, please recheck the cabling, or jump to “Troubleshooting”
for possible reasons and solution.

6
Chapter 3 Connect Your ZSR4134WS
How to Set the Network Configurations for My Computer
1. Click Start →
→→
→Control Panel
2. Click Network and Internet Connections →
→→
→ Network Connections

7
3. Right click Local Area Network Connection and select Properties.
4. Select Internet Protocol (TCP/IP) and click Properties.

8
5. Select Obtain an IP address automatically and Obtain NS server
address automatically. Click OK to save the configurations.

9
How to Check the Network Connection
1. Select Start →
→→
→ Programs →
→→
→ Accessories →
→→
→ Command Prompt.
2. Input ping 192.168.0.1 and press Enter. If the screen displays as below, it
means your PC is connected to your router successfully.
If not, please make sure the hardware installation and network adapter are
OK.

10
Chapter 4 asic Configurations
This section is to show you how to configure your new ZSR4134 S through the
eb-based Configuration Utility.
How to Access the Web-based Configuration Utility
1. After your computer obtained an IP address from ZSR4134 S, please start
your web browser, and input the default IP address of ZSR4134 S
http://192.168.0.1 in address bar.
2. Please input user name and password and then click OK.
Both default user name and password is admin.

11
Setup Wizard
1. hen Welcome to Setup Wizard pop out, Click Next to continue.
2. Select one Internet connection type you’re using. If you’re not sure, click
etect or contact your Internet Service Provider.
Click Next.

12
a. ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click Next.
b. Dynamic IP (Via DHCP)
If your connection type is Dynamic IP, it means your IP address keeps
changing every time you connect. You do not need to enter the
information.
c. Static IP
Fill the network address information from your ISP in the IP Address,
Subnet Mask, Gateway and Primary DNS server fields and click Next.
d. L2TP
Enter the Account and Password provided by your ISP.
L2TP(Layer 2 Tunneling Protocol) provides two address modes.
Dynamic IP: If the L2TP offered by your ISP is Dynamic IP, please select
Dynamic IP.
Static IP: Please fill in the parameters provided by your ISP.

13
After configuration, please click Next.
e. PPTP
Enter the Server IP Address, User Name, and Password provided by your ISP
PPTP(PP Tunneling Protocol) provides two address modes.
Dynamic IP: If the PPTP offered by your ISP is Dynamic IP, please select
Dynamic IP.
Static IP: Please fill in the parameters provided by your ISP.
After configuration, please click Next.

14
3. Click Apply and reboot ZSR4134 S, or select Reboot in System Tools of
the left menu and click Reboot the router button.
4. hile rebooting, please wait for few minutes and DO NOT power off.
5. Select System Status of the left menu to find out the current network and
system information.

15
Chapter 5 Advanced Settings
LAN Settings
MAC Address: ZSR4134 S’s physical MAC address on your local network
is unchangeable.
IP Address: ZSR4134 S’s LAN IP address (not your PC’s IP address).
Once you modify the IP address, you need to remember it for the
eb-based Utility login next time. Default value is 192.168.0.1
 Subnet Mask: ZSR4134 S’s subnet mask for measurement of the
network size. Default value is 255.255.255.0.

16
WAN Settings
a. PPPoE
Connection Mode: Show your current connection mode.
Account: Provided by your ISP.
Password: Provided by your ISP.
MTU: Maximum Transmission Unit. It is the size of largest datagram that
can be sent over a network. The default value is 1460. Do NOT modify it
unless necessary.
Service Name: It is defined as a set of characteristics that are applied to
a PPPoE connection. Enter it if provided. Do NOT modify it unless necessary.
AC Name: Enter it if provided. Do NOT modify it unless necessary.
Internet Connection Option:
Connect Automatically: Connect automatically to the Internet after
rebooting system or connection failure.
Connect Manually: Connect to the Internet by the user manually.
Connect on Demand: Re-establish your connection to the Internet after
the specific time (Max Idle Time). Zero means your Internet connection at
all time. Otherwise, enter the minutes to be elapsed before you want to
disconnect the Internet access.
Connect on Fixed Time: Connect to the Internet during the time you fix.