Zotac ZBOX series User manual

QUICK START GUIDE
PACKAGE CONTENTS
CUSTOMIZING YOUR ZOTAC ZBOX
INSTALLING MEMORY MODULES (OPTIONAL)
• 1 x ZOTAC ZBOX
• 2x AC Adapter
• 2 x Power Cord
• 1 x Warranty Card
• 1 x User Manual
• 1 x Windows Driver DVD
• 1 x USB flash drive with Windows drivers
• 2 x Antenna
1. Lay the ZOTAC ZBOX on a flat surface with the rubber feet
facing upwards.
2. Locate the two thumb screws and remove.
3. Slide the cover o the ZOTAC ZBOX in the direction of the
arrow.
1. Locate the SO-DIMM memory slots and insert a
SO-DIMM memory module into the slot at a 45
degree angle.
2. Gently press down on the memory module until
it locks into place by the arms of the memory
slot.
INSTALLING HARD DISKS/SSD
1. Locate the 2.5-inch SATA hard disk/SSD and
the hard disk bracket.
2. Install the hard disk/SSD to the hard disk
bracket.
3. Insert the hard disk bracket into the SATA
slot.
4. Reinstall the thumb screw.
1
2
3
12
1
2
3 4

INSTALLING M.2 SSD MODULE (OPTIONAL)
1. Locate the M.2 SSD slot and insert an M.2 SSD
module into the slot at a 45 degree angle.
2. Gently press down on the M.2 SSD module, and install
the screw.
SETTING UP YOUR ZOTAC ZBOX
FRONT PANEL
REAR PANEL
1. Connect antenna for WiFi
2. Connect USB 3.0 devices
3. Connect DP displays
4. Connect HDMI displays
5. Connect to home networks
6. Connect 2 x power cable
7. Turn on the system
1. Power button
2. Memory card reader (SD/SDHC/SDXC)
3. USB 3.1 port
4. Microphone jack
5. Headphone/Audio Out jack
6. USB 3.1 Type-C port
1. WiFi antenna connectors
2. Power inputs (DC19.5V)
3. USB 3.0 ports
4. DP ports
5. HDMI ports
6. LAN (RJ45) ports
12
2
3
4 5
6
1
7
2345
6
1
1
32
4
1561