Zotac ZBOX PRO PI339 pico User manual

1
ZP-PI339
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language in any form or by any means, except by the
purchaser for backup purposes, without the express written permission of
ZOTAC.
Products and corporate names mentioned in this manual may be registered
trademarks or copyrights of their respective companies, and are used for
identication purposes only. All trademarks are the property of their respec-
tive owners.
Every e󰀨ort has been made to ensure the contents of this manual are correct
and up to date. However, the manufacturer makes no guarantee regarding
the accuracy of its contents, and reserves the right to make changes without
prior notice.

2
Table of Contents
Specications ----------------------------------------------------------------------------------------------------3
Safety instructions----------------------------------------------------------------------------------------------5
Package contents -----------------------------------------------------------------------------------------------6
Port layout---------------------------------------------------------------------------------------------------------7
Using your ZP-PI339 -------------------------------------------------------------------------------------------9
Conguring wireless connection -------------------------------------------------------------------------9
Conguring audio output-----------------------------------------------------------------------------------9
Watch Dog Timer function -----------------------------------------------------------------------------------10

3
Specications
Microprocessor Support • Intel Alder Lake-N processor N100
(Quad Cores up to 3.4GHz, 6MB cache)
Onboard Graphics Support • Integrated Intel UHD Graphics up to 750MHz graphics
frequency with 24 Execution Units
• 2x HDMI 2.0 (max resolution: 4096x2160 @60Hz)
Memory • Onboard 8GB LPDDR5/X
USB Ports • 2x USB 3.1 Type-A ports
Storage • 2230/42/80 M Key SATA/PICe x4 M.2 storage
Network • 1x Gigabit Ethernet LAN
WiFi Support • WiFi 6, IEEE 802.11ax/ac/a/b/g/n
• Bluetooth 5.2
Operating Systems • Supports Windows 11, Windows 10 IoT Enterprise LTSC
2021 and Ubuntu 20.04.5 LTS Linux operating system
H/W watchdog timer • Timeout value = 0 ~ 65,535. Unit: minute/second
Case Dimension • 114.8mm x 76mm x 26.2mm

4

5
Safety instructions
ZP-PI339 is designed and tested to meet the latest standards of safety for information technology
equipment. However, to ensure your safety, it is important that you read the following safety instruc-
tions.
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert objects of
any kind into the ventilation openings.
Use this product in environment with ambient temperature range 0°C ~ +40°C.
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned o󰀨, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

6
Package contents
Thank you for choosing our ZP-PI339. The following illustration displays the package contents of your
new ZP-PI339. If any of the below items are damaged or missed, contact your retailer.
• 1 x ZP-PI339
• 1 x L-shaped mounting kit
• 2 x Mounting screws
• 1 x AC Adapter
• 2 x WiFi antennas

7
Port layout
1. Power input (DC 5V, 4A)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the mini-PC. To prevent damage to the mini-PC,
always use the supplied power adapter.
2. HDMI ports
The HDMI (High Denition Multimedia Interface) port supports with HDMI2.0, max resolution
4096x2160 @60Hz.
3. Ethernet port
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connection to a local
network.
4. Power button
The power button turns the system ON and OFF.
5. USB 3.1 ports
The USB 3.1 port supports SuperSpeed USB 3.1 devices and is backwards compatible with
USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum performance with
USB 3.1 compatible devices.
6. Clear CMOS hole
Insert a pin into the Clear CMOS hole for 3 seconds to clear CMOS.
1
2
3
4
56

8
7. WiFi antenna connectors
The WiFi antenna connector supports the included WiFi antenna.
Note 1: The power adapter may get warm or hot when in use. Do not cover the adapter and keep it away from your body.
Note 2: Due to the unique design, some connectors are placed upside down.
7 7

9
Using your ZP-PI339
Conguring a wireless connection
Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon in the notication
area.
2. Select the wireless network you want to connect to from the
list and click Connect.
3. After connection is established, you will see “Connected.”
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
Conguring audio output
Follow the steps below to enable audio output via
HDMI when connecting the ZP-PI339 to a TV or
receiver via HDMI.
1. Access the Sound settings via the system Control
Panel.
2. Under Playback devices, click the display
device that corresponds with your HDMI audio
compatible display
3. Click the “Set Default” button in the lower right
hand corner.
4. Click “OK” to exit the setup.

10
Watch Dog Timer function
This device support Watch Dog Timer. The detail of Watch Dog Timer function, user manual,
demonstration application and source code for Windows and Linux can refer to the Watch Dog
Timer driver folder from Zotac webpage under ZBOX Pro PI339 section.