Zuwa UNISTAR 2001-A Operating instructions

SERVICE-INSTRUCTIONS
FOR IMPELLER PUMPS TYP 2001
ZUWA - Zumpe GmbH
Franz-Fuchs-Str. 13-17
D-83410 Laufen
Phone: [phone]
Fax: [phone]
E-Mail: [email protected]
www.zuwa.de
Created from Huber J.
Proved from Wimmer H.
Version: 2.0
05.11.2018
Reassemble pump vice versa.
The NIROSTAR TYP 2001 series comes without lateral discs.
Housing with small shoulder on top, turn Impeller counter clockwise
into housing. Push Impeller as far up as possible.
Press Impeller out of housing.
Release safety rings and press out bearing
respectively shaft seal ring.
impeller replacement 1
impeller replacement 2 impeller replacement 3
impeller replacement 4
Step 5Step 1
Step 2
Step 3
Step 6
In Out
Narrow
shoulder
Step 7
Impeller Pump Typ 2001-A Release safety ring and press out shaft.
Step 4
Release screws, remove stands and cover.
Pull off lateral disc (without hole) & housing with Impeller.
Remove O-rings and lateral disc (with whole).

SERVICE-INSTRUCTIONS
FOR IMPELLER PUMPS TYP 2000
ZUWA - Zumpe GmbH
Franz-Fuchs-Str. 13-17
D-83410 Laufen
Phone: [phone]
Fax: [phone]
E-Mail: [email protected]
www.zuwa.de
Created from Huber J.
Proved from Wimmer H.
Version: 2.0
05.11.2018
Reassemble pump vice versa.
The NIROSTAR TYP 2000 series comes without lateral discs.
Impeller Pump Typ 2000-A
Release screws, remove cover.
Remove lateral disc (without hole) and O-ring.
Remove housing with Impeller. Housing with narrow shoulder on top, turn Impeller counter
clockwise into housing. Push Impeller as far up as possible.
Press Impeller out of housing.
Remove O-ring, lateral disc with whole and lid rom the rear
side. Release safety ring and press our shaft seal.
Mortal danger - electric shock!
Disconnect pump from power supply
prior to working in it!
Step 4Step 1
Step 2
Step 3
Step 5
In Out
Narrow
shoulder
Step 6
impeller replacement 1
impeller replacement 2 impeller replacement 4
impeller replacement 3 impeller replacement 5