ZyXEL Communications VMG8924 User manual

ZyXEL VMG8924
Getting started with your wireless router
Welcome to
John Lewis Broadband

2
Contents
Before you begin 3
Read this before you start setting up.
Get connected 4
What to do and when.
Wi-Fi 8
How to set up and use a Wi-Fi connection.
Connection troubleshooting 10
What to do if you’re having problems connecting.
Frequently asked questions 12
Find out about your usernames and more information about your router.
Where to nd more help 15
How to nd help on our website or ask us a question.
Your Router
Power Supply
Microlter Internet Cable (Grey)
Ethernet Cable (Yellow)
What’s in the box?

3
Before you begin
Choosing your router’s new home
Before you get started, please read through this booklet to familiarise yourself with what you’ll need
to do. As well as helping you set up your router, you’ll nd answers to common questions about
broadband, and troubleshooting information to help with any problems.
Where you set your router up can make a big difference to how well your broadband service works.
Here’s a few points to consider:
• Your connection will perform better if you can connect your router to the master phone socket
(it’s usually the one closest to where the phone line enters your home).
• Your router can get too warm if air can’t ow around it. Please don’t place your router on top of
electrical equipment or near other sources of heat. Also try to avoid putting it under a desk, on a
carpet/other fabric or behind large objects.
• Using Wi-Fi? Try to set up your router close to where you’ll be using broadband the most. Thick
walls, concrete oors and large metal surfaces can weaken the signal – avoid these if you can.
• Your broadband will work better if you leave your router switched on all the time (including when
you’re not using it, see page 12). If you can, connect it to an unused power socket and make sure
that it won’t be switched off with other electrical devices.
If you’re new to John Lewis Broadband, please wait until we’ve activated your
broadband before you set up your router. We’ll let you know by email and text
(if we have your mobile number).
If this is a replacement router for an existing John Lewis Broadband service, you
can jump straight to page 5.
i

4
• If you’re using an extension cable, only connect a microlter on one end, not both.
• Avoid ‘double ltering’ – don’t connect one microlter to another.
• You can connect two or more telephone devices to one microlter if you have
a splitter.
• Not got enough microlters? Leave something unplugged until you can get more.
• Not using one of your phone sockets? No need to connect a microlter.
Get connected
Step 1a – Connecting to single phone socket
Single socket
NTE5/Non-NTE5
Step 1b – Connect to double phone socket
ADSL v1.0
If you have a socket like this, you will need to use the
included microlter as shown. If you have a double
socket, skip to Step 1b.
If you have a double phone socket, connect your Hub
directly to the socket without using the microlter.
If you’ve had bre broadband installed by an engineer
previously, you should have this kind of socket.
ADSL v1.0
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F
i
Double socket
SSFP

5
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F
• Connect the stand to the bottom of the router and make sure it’s steady when you stand it up.
Step 2 – Set up your router
• Plug the power cable into the back of your router and the other end into a power socket.
• Plug the grey Internet cable into the DSL socket on your router. Plug the other end of the cable
into the DSL socket of the microlter that’s connected to your phone socket.
• Press the black power button (marked ON/OFF) on the back of your router to switch it on.
Wait for the Power and Broadband lights to come on. See page 10 if the Broadband light doesn’t
come on.

6
Step 3 – Connect your computer
• Plug one end of the Ethernet cable (yellow ends) into any of the yellow sockets (marked
LAN 1 – LAN 4) on the back of your router.
• Plug the other end of the Ethernet cable (yellow ends) into your computer’s Ethernet socket.
This is a small socket on the back or side of your computer that’s usually marked LAN,
Ethernet, or . Check your computer manual if you’re not sure.
• On the front of the router, the LAN light will turn green and start ashing as data is transferred.
When setting up for the rst time, connecting with the Ethernet cable is a quick
way to check that everything is working as it should. Once you’ve connected to
the Internet, you can then switch to using Wi-Fi.
If this isn’t convenient or you’d prefer to use Wi-Fi right away, turn to page 8 and
follow the instructions there, but please make sure you return to page 7 once
Wi-Fi is connected.
i
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F

7
If you don’t see your home page after opening your browser, or your Internet light
is red, go to page 10.
15 minutes later…
Welcome back – you’re nearly there.
Open your computer’s web browser (e.g. Internet Explorer, Firefox or Safari). You should see your
home page (you can change this to John Lewis Broadband later if you like).
To make sure everything’s working, go to www.google.co.uk and search for something. If you get
results, that’s it, you’re on the Internet.
This is the easy part…
Put this guide down, make yourself a drink and come back in 15 minutes.
Don’t try to use the Internet while you’re waiting (even if the Internet light turns green), as your
router might still be setting itself up.
Step 4 – Get online
i
Wait
15 mins

8
Wi-Fi
Your router is ready for Wi-Fi use out of the box. The steps shown below should work with any
computer or device that supports Wi-Fi connection.
How to connect to your Wi-Fi Network
If you’re setting up your router for the rst time, please make sure you go back
and follow the steps on page 7 once Wi-Fi is connected.
1. Open the Wi-Fi menu
• Windows devices: Click the Wi-Fi icon on the taskbar at the bottom of your desktop.
• OS X devices: Click the Wi-Fi icon on the toolbar at the top of your screen.
• Mobile devices: Find ‘Wi-Fi’ in the settings menu and make sure it’s switched on.
2. Select your Wi-Fi Network from the list of networks
• If you’re not sure what your Wi-Fi Network is called, you’ll nd it printed on the back of your router.
3. Enter your Wi-Fi Password
• The Wi-Fi Password is also printed on the back of your router. Type it in exactly as shown and
click ‘Connect’ (or ‘Join’ if you’re using an Apple device).
If your device supports Wi-Fi Protected Setup (WPS)
To connect using WPS, follow the instructions for your device and when
prompted, press the WPS button on the left side of your router. The Wi-Fi and
WPS lights will ash orange to indicate that your router is ready to connect.
They’ll stop ashing once your device has connected.
1
2
WPS
Wi-Fi
O
Light
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F
i

9
How to get the best speed over Wi-Fi
To get the best W-Fi speed, you should connect with a computer or device that supports Wireless AC.
Many new devices support wireless AC as standard.
Most devices tend to support Wireless N which may restrict your wireless speeds to 40-50Mbps
depending on the circumstances. Older devices tend to support Wireless G which limits speeds
even further. To use wireless AC with older equipment you’ll need to install Wireless AC compatible
adapters on each computer you connect with.
If you need more help with Wi-Fi
Want to know how to connect your games console or need more help with your Windows or
Apple computers? Check out www.johnlewisbroadband.com/support
If you’re having trouble connecting...
• If you’ve already connected with the Ethernet cable (yellow),
remember to unplug it when switching to Wi-Fi.
• Make sure you enter the Wi-Fi Password exactly as shown.
Check the back of your router if you need a reminder.
• If you can’t nd your Wi-Fi Network on the list, check the Wi-Fi
light on your router. If it’s off, press the Wi-Fi button on the side of
your router (to switch Wi-Fi on) and try again.
• If you’re using a laptop and can’t see any networks, make sure Wi-Fi
is switched on. There’ll be a switch, keypress or software to do this.
Check your laptop’s manual for more information.
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F
1
2
WPS
Wi-Fi
O
Light
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F

10
What to do How to do it
First, check that your phone
line is working...
Pick up or plug in a phone and check for a dial tone.
If you don’t hear a dial tone, or the line is noisy, there may be a
fault on your phone line. Contact your phone provider and try
connecting to broadband again when it’s xed.
If your phone line is OK,
check your broadband
equipment...
• Check that every device connected to your phone line (e.g. Sky®
boxes, answerphones, alarms) is using a microlter. See page 4
for help with this.
• If checking microlters hasn’t xed the problem, unplug
everything from your phone line (on all oors), leaving only your
router connected and try again.
• If the problem continues, connect the router to your master
phone socket (it’s usually the one closest to where the line
enters your home) and try again.
If steps 2 or 3 xed the problem, then either an extension or one
of the devices connected to your line is the cause of the problem.
You can nd out which by plugging your devices back in one at a
time.
If the broadband light still is
not lit after trying the above... Call our Support Team on 0800 022 3300 to report a fault.
Connection troubleshooting
If you’re having problems connecting, look at the lights on the front of your router and follow the
appropriate instructions.
If the broadband light is not lit
There’s a problem with your broadband signal. Please follow the steps below.
If you’re a new customer, please make sure that your broadband service is ready
before you continue. We’ll send you an email to conrm this (and a text message
if we’ve got your mobile number).
i

11
If you can only access the ‘Broadband Setup’ page
• If you’re setting up for the rst time (or following a factory reset), close your web browser and try
again in 15 minutes.
• If you’re still seeing the ‘Broadband Setup’ page, enter your Account Username and Password (see
the next page if you’re not sure what these are).
• Check your Provider in the drop-down list and change it if you need to.
• Click Go - after a few minutes you’ll see a large green tick, which means you’re connected to the
Internet.
If the Internet light is red
Your router can’t connect to our network. Turn it off for 15 minutes and try again. If this doesn’t x
the problem, follow the factory reset instructions on page 13 and try again.
If the Internet light is still red after trying the above, call our Support Team on 0800 022 3300 to
report a fault.
If the Broadband light is lit and the Internet light is green
Your router is connected to the Internet but your computer or device is not connected to the router.
Check and follow the connection instructions on page 6 (for wired connections) or page 8 (for Wi-Fi
connections) to solve this.

12
Frequently asked questions
Where can I nd my Account Username and Password?
You chose these when you ordered your broadband service. Your Account Username is used to log
into our website along with your password (containing at least 8 characters).
Your ‘Welcome to John Lewis Broadband’ email conrms your Account Username and you can get a
password reminder at www.johnlewisbroadband.com/account/forgot-password
Should I leave my router switched on all the time?
Yes. Leaving your router on will make sure you get the best speed and performance from your service.
Don’t switch it off at night! Regularly switching off your router can make it look like your service is
disconnecting. If this happens, equipment in your telephone exchange will mark your line as unstable
and temporarily reduce your speed to improve stability.
Speed reductions are never permanent, but it can take up to 3 days before your speed returns
to normal.
Provider Broadband Username
Greenbee Telecoms [e-mail]
Waitrose.com [e-mail]
Where can I nd my Broadband Username and Password?
Your Broadband Username is made up of two parts separated by an @ symbol. See below replacing
‘username’ with your own Account Username.
[email protected]om
Please note, if you’ve switched from Greenbee Telecoms or Waitrose.com broadband, please see the
table below for your Broadband Username:
You’ll only need to use these when setting up your router manually or if you
choose to install a different router.
i

13
How do I access my router settings?
• Open your web browser and go to 192.168.1.1
• You’ll be prompted with a login box and you’ll need to enter the username: admin and the
password: 1234
How do I factory Reset my router?
• Press a paperclip or pointed object into the Reset pin hole on the back of your router and
keep it pressed in for 20 seconds.
• Release the Reset button and wait until the Broadband light is lit. This may take a couple
of minutes.
• Your router is now restored to factory settings – follow this guide from page 5 to get
connected again.
1
2
WPS
Wi-Fi
O
Light
D
S
L
L
A
N
1
L
A
N
2
L
A
N
3
L
A
N
4
W
A
N
P
H
O
N
E
1
P
H
O
N
E
2
R
E
S
E
T
P
O
W
E
R
O
N
/
O
F
F

14
Light Colour / State What does it mean?
Power
Off
No power. Check the cables and make sure you’ve
switched your router on at the back and at the wall
socket.
Red Router failed to start, please power off from the wall
socket then power back on and try again.
Green The router is on.
Broadband Off Broadband signal not detected, see page 10.
Green ADSL Broadband signal detected.
Orange VDSL (Fibre) signal detected.
Internet Off Connection not attempted yet.
Red Connection to Internet failed. Please see page 11.
Green Your router is connected to the Internet.
Flashing Data transferring over Internet connection.
Wi-Fi Off Wi-Fi is switched off.
Green Wi-Fi is on.
Flashing Green Data is transferring over Wi-Fi
Flashing Orange WPS is searching for a device to connect.
LAN Off Ethernet socket not connected to a device.
Green Ethernet socket connected to a device.
Flashing Data transferring over Ethernet connection.
What are my router’s lights telling me?

15
How to nd more help
If you’re able to get online you’ll nd lots of help on our website.
Go www.johnlewisbroadband.com/support to browse our support pages by subject.
You’ll nd answers to common questions about our products & features and detailed troubleshooting
guides to help you solve problems.
If you’re still experiencing difculties, or have any questions please call us on 0800 022 3300.
John Lewis Broadband is a trading name of John Lewis plc
John Lewis Broadband is provided by Plusnet plc
Registered in England 3279013
Registered Ofce: The Balance, 2 Pinfold Street, Shefeld, S1 2GU
VAT No. 245 7193 48