1stCampro 100-002 User manual

Trail Camera
Swift
Instruction Manual
(For Model # 100-002）

Content
1: Camera Overview.............................................................. 1
2: Quick Start Guide.............................................................. 2
2.1: Installing The Batteries ............................................... 2
2.2: Installing the SD Card ................................................. 3
2.3: Understanding Main Screen Info ................................... 4
2.4: Power Switch ............................................................. 4
2.5: Settings Map ............................................................. 5
3: Viewing Photos on the Color Display..................................... 7
4: Auxiliary Power ................................................................. 8
5: Mounting Tips ................................................................... 8
Appendix Ⅰ: Technical Specifications .......................................10
Appendix Ⅱ: Parts List...........................................................11

Page 1
1: Camera Overview
(Fig. 1 Front View)
(Fig. 2 Bottom View)

Page 2
(Fig. 3 Inside View)
(Fig. 4 Operation Panel)
2: Quick Start Guide
2.1: Installing the Batteries
We suggest that you use high quality, 12pcs, AA 1.5V alkaline
batteries to maximize camera performance and battery life.
Please pay attention to the (+) or (-) molded into each sleeve

Page 3
to determine how to properly arrange the batteries. Negative
battery terminals always contact the spring.
Note:
·Do not mix different types of batteries
·Do not mix old and new batteries
·Recommend high-density and high-performance batteries, such as Alkaline
·Always remove batteries when not in use to prevent leakage
2.2: Installing the SD Card
To enable power to the camera you must first install an SD
Card in the designated slot at the bottom of the camera (see
Fig. 2). You can use any SD Card storage size up to 32GB. You
must also have the SD Card inserted into the camera to
complete the setup process.

Page 4
2.3: Understanding Main Screen Info
(Fig. 5 Main Screen)
2.4: Power Switch
Slide the power switch to the SETUP position. You can now
start to customize your camera settings.
(Fig. 6 Power Switch)
Power Switch:
OFF: Power off（Please remove batteries when not in use）

Page 5
SETUP: Customize Camera settings
ON: Working mode (the display screen will power off).
2.5: Settings Map

Page 6

Page 7
3: Viewing Photos on the Color Display
You can view your photos on the color display when in the
field. If you would like to do this, make sure the Power
Switch is set to the SETUP position. Press the
PLAYBACK button (see Fig. 4). You can use the ▲and ▼
buttons to toggle through the photos. If you see photos
you want to delete, show the image on the screen and

Page 8
press the MENU button. You will see the screen as
pictured below.
(Fig 7 Playback)
4: Auxiliary Power
Your camera comes with an Auxiliary power jack. If you
want to hook up an external 6V battery to power the
camera, you can. A standard 4mm jack is required to
make the connection. You can find external 6V power
accessories at www.firstcam.pro
5: Mounting Tips
For best results, mount the camera approximately 48” off
the ground and 25ft away from the target area. To enhance
the flash, we recommend positioning the camera towards

Page 9
an area with a backdrop to reflect the maximum amount
of light.
Note:
1. The sun should not be shining directly on the face of
the camera.
(Fig. 8)
2. Reflect with trees or other objects to add more light to
your target.
(Fig. 9)
3. Avoid placing the camera where it is exposed to
constant wind or there is too much vegetation. False
triggers mostly occur on sunny, breezy days. When the
wind moves the vegetation, the camera detects this and
cannot distinguish it from a warm-blooded animal.

Page 10
Appendix Ⅰ: Technical Specifications
Picture Resolution
12MP,8MP,
5MP(Real), 3MP
Lens
F/NO=3.0 FOV(Field of
View)=52°
IR-Flash
45ft
Display Screen
2” LCD
Memory Card
Up to 32GB
Video Resolution
QVGA,WVGA,720P,1080P
PIR Sensor
Multi Zone
PIR Sensitivity
Adjustable (High/Normal/Low)
Trigger Time
0.9s
Operation Temp.
-4°F …. +140°F
Trigger Interval
0s –60 min.
Time lapse
5sec-8 hours
Photo Burst
1–3
Video Length
5–60s
Power Supply
4/8/12AA
Stand-by Current
< 0.25 mA (<6mAh/Day)
Mounting
Bungee/Belt/Cable lock
Dimensions
147x116 x76 mm
Operation Humidity
5% - 90%
Security
Authentication
FCC, CE, RoHS

Page 11
Appendix Ⅱ: Parts List
Part Name
Quantity
Digital Camera
One
Belt
One
User Manual
One
WARRANTY
FirstCam Outdoor Inc. provides 12 months of warranty
service for this product against manufacturing defects or
malfunctions. If your camera fails to function under normal
use within 1 year, we will repair or replace the camera at no
charge. The purchase receipt must be included from an
authorized retailer to validate the warranty. Improper use of
the camera resulting in damage is not covered by this
warranty. FirstCam Outdoor Inc. can provide repair service
after the warranty expiration. In this case the customer will
be responsible for any charges on parts, labor and shipping
costs. Please contact us for more details. Our complete
warranty policy can be found on our website:
www.firstcam.pro