2N Telekomunikace 2N Access Unit 916009 User manual

www.2n.czVersion
2N
®Access Unit
Access Control
Installation Manual
2.2



The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications
equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private
branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has
been ranked among the Czech top companies for years and represented a symbol of
stability and prosperity on the telecommunications market for almost two decades. At
present, we export our products into over 120 countries worldwide and have exclusive
distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands protected
by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On
www.faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...“.
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with
®Access Unit
all basic requirements and other relevant provisions of the 1999/5/EC directive. For the full
wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our website at
www.2n.cz.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by this
standard and guarantee a high quality, technical level and professional aspect of all our
products.
Content

Content
1. Popis produktu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1Komponentyasouvisejícíprodukty ..................................6
1.2Použitézkratky,termínyapiktogramy ................................19
2. Popis a instalace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.1Nežzačnete ....................................................21
2.2Mechanickámontáž ..............................................22
2.3Elektrickáinstalace ...............................................45
2.4Připojenírozšiřujícíchmodulů ......................................51
2.5Dokončenímontáže ..............................................59
3. Údržba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4. Technické parametry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
5. Doplňkové informace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
5.1Řešeníproblémů ................................................65
5.2Směrnice,zákonyanařízení .......................................66
5.3Obecnépokynyaupozornění .......................................68

42N TELEKOMUNIKACE a.s., www.2n.cz
®
1. Popis produktu
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Properties
2N® Access Unit is an elegant and reliable access IP system equipped with a number
of useful functions, which are not always common in devices of this category.
2N® Access Unit is a modular access system that meets all individual user needs.
Unlike other access systems available on the market, is not a2N
®Access Unit
single-module system with a fixed functionality, but a user friendly modular system,
allowing the user to assemble required modules and accessories on a “plug and play”
basis. This approach provides individual configuration options and increase in
functionality as necessary.
Keypadis a numeric keypad module that allows you to use the intercom for code lock
switch activation or phone number/user number calling.
Integrated card reader moduleprovides the RFID card access control functionality.
With additional software settings, you can control more functions than the door lock
using the card.
Electric lock switch. This switch can be can be controlled via a numeric keypad, PC
application or any phone during a call. The switch can be completed with additional
output modules if necessary. A wide range of the switch mode settings provide an
infinite number of applications.
Resistance – is designed as a robust, mechanically resistant access2N® Access Unit
system, which withstands any weather conditions without requiring additional
accessories.
Installation of is very easy. All you have to do is assemble the2N® Access Unit
required modules and connect the system to your LAN via a mains cable. Being of the
“plug and play” type, the modules need not be configured individually. Feed the

52N TELEKOMUNIKACE a.s., www.2n.cz
®
intercom either from a 12V power supply or directly from your PoE-supporting LAN.
To configure 2N® Access Unit , you need a PC equipped with any Internet browser.
To manage extensive intercom installations easily, use the .2N® Access Commander
Advantages of Use
Elegant design
Weather resistance
Variable mounting options (brick/plasterboard flush mounting, wall mounting)
Optional numeric keypad with backlight
Use of multiple modules of the same type - e.g. building entrance/exit card
reader
Integrated electronic lock switches with wide setting options
Integrated RFID card reader module
LAN (PoE) or external 12V power supply
Configuration via web interface or special PC application
HTTP server for configuration
SNTP client for server time synchronisation
SMTP client for e-mail sending
TFTP/HTTP client for automatic configuration and firmware update

62N TELEKOMUNIKACE a.s., www.2n.cz
®
1.1 Komponenty a související produkty
Basic Units
Part No. 916009
2N Access Unit (125kHz)
®
Part No. 916010
2N Access Unit (13.56MHz + NFC)
®
Tip
Supported auxiliary modules:2N Helios IP Verso modules are
®
supported- RFID card reader (125kHz; 13.56MHz), keypad, 5-button
module, Wiegand, etc.

72N TELEKOMUNIKACE a.s., www.2n.cz
®
Frames
9155011Part No.
Flush mounting frame, 1-module
Covering frame for the 1-module
brick/plasterboard flush mounting box. This
1-module frame is used for connection of an OUT
card reader or keypad, for example. Remember to
order the frame when you order a 1-module flush
mounting box, Part No. 9155014.
9155012Part No.
Flush mounting frame, 2-module
Covering frame for the 2-module
brick/plasterboard flush
mounting box. Remember to
order the frame when you order
a 2-module flush mounting box,
Part No. 9155015.

82N TELEKOMUNIKACE a.s., www.2n.cz
®
9155021Part No.
Wall mounting frame, 1-module
Covering frame for wall (surface) mounting.This 1-module
frame is used for connection of an OUT card reader or keypad,
for example.
9155022Part No.
Wall mounting
frame, 2-module
Covering frame for
wall (surface)
mounting.
5.3 Extending Modules
Tip
The 1-module frame is used when an auxiliary module from 2N Helios
®
is mounted onto an extended interconnecting cable, for an OUTIP Verso
card reader or keypad, for example.
Tip
Remember to order the flush mounting frame when you order a
brick/plasterboard flush mounting box:
1-module frame, Part No. – 1-module flush mounting box,9155011
Part No. .9155014
2-module frame, Part No. 2-module flush mounting box,9155012
Part No. .9155015

92N TELEKOMUNIKACE a.s., www.2n.cz
®
Part No. 916020
RJ45 adapter
Part No. 9155033
2N Helios IP
®
Verso– 13.56 MHz
RFID Card Reader
The card reader
module works with
as2N Access Unit
®
an OUT card reader.
The module supports
cards, key fobs
and/or other
13.56MHz standard
carriers.
ISO 14443AMifare
Classic 1k & 4k,
DESFire EV1, Mini,
Plus S&X, Ultralight,
Ultralight C
ISO 14443BCEPAS,
HID iCLASS
JIS X 6319Felica
Part No. 9155040
2N®Helios IP Verso -
13.56MHz RFID Card Reader,
NFC Preparation
The card reader module works
with as an2N Access Unit
®
OUT card reader. The module
supports cards, key fobs and/or
other 13.56MHz standard
carriers.
ISO 14443AMifare Classic 1k
& 4k, DESFire EV1, Mini, Plus
S&X, Ultralight, Ultralight C
ISO 14443BCEPAS, HID
iCLASS
JIS X 6319Felica
ISO 18092SmartPhone with
NFC/HCE support, from Android
version 4.3

102N TELEKOMUNIKACE a.s., www.2n.cz
®
9155032Part No.
2N Helios IP Verso
®–
125kHz RFID Card Reader
The card reader module
works with 2N Access Unit
®
as an OUT card reader. The
module supports cards, key
fobs and/or other 125kHz
standard carriers: orEM-41xx
.HID Proximity
9155031Part No.
2N Helios IP
®
Verso– keypad
The numeric keypad
module helps enter a
numeric entrance
code. Use the
keypad for
departures or double
entrance
authentication. The
keypad digits and
symbols are backlit.
Part No. 9155037
2N Helios IP Verso
®-
Wiegand Module
The Wiegand module helps you
interconnect your system with
other systems (access,
security) via the Wiegand
interface. The module is
installed under another
module, i.e. cannot be installed
directly into the2N Access
®
(must be mountedUnit
outside).
Part No. 9155034
2N Helios IP Verso
® I/O
Module
The logic input/output
module helps you integrate
various sensors and control
doors or other equipment.
The module is installed under
another module, i.e. cannot
be installed directly into the
(must be2N Access Unit
®
mounted outside).
9155030Part No.
2N Helios IP
®
Verso– Infopanel
The Infopanel
module helps you
add your company
logo, opening hours
and similar
information to the
access unit. The
Infopanel has
software-controlled
backlight.
9155050Part No.
1m Interconnecting Cable
Part No. 9155054
3m Interconnecting Cable
Part No. 9155055
5m Interconnecting Cable

112N TELEKOMUNIKACE a.s., www.2n.cz
®
Mounting Accessories
9155014Part No.
Flush mounting box, 1-module
9155015Part No.
Flush mounting box, 2-module
Part No. 9155061
Backplate, 1 module
Part No. 9155062
Backplate, 2 modules
The mounting boxes for are compatible with the2N Helios IP Verso
®2N Access Unit ®
, refer to the table below:
Part No. Name Description
9155011
2N Helios
®
IP Verso–
Flush
mounting
frame,
1-module
Covering frame for the 1-module brick/plasterboard flush
mounting box. This 1-module frame is used for connection
of an OUT card reader or keypad, for example. Remember to
order the frame when you order a 1-module flush mounting
box, Part No. 9155014.

122N TELEKOMUNIKACE a.s., www.2n.cz
®
9155012
2N Helios
®
IP Verso–
Flush
mounting
frame,
2-module
Covering frame for the 2-module brick/plasterboard flush
mounting box. Remember to order the frame when you
order a 2-module flush mounting box, Part No. 9155015.
9155014
2N Helios
®
IP Verso–
Flush
mounting
box,
1-module
The box is designed for brick/plasterboard flush mounting of
a 1-module installation. Supplied including accessories for
multiple box assemblies.
9155015
2N Helios
®
IP Verso–
Flush
mounting
box,
2-module
The box is designed for brick/plasterboard flush mounting of
a 2-module installation. Supplied including accessories for
multiple box assemblies.
9155021
2N Helios
®
IP Verso–
Wall
mounting
frame,
1-module
Covering frame for wall (surface) mounting.This 1-module
frame is used for connection of an OUT card reader or
keypad, for example.
9155022
2N Helios
®
IP Verso–
Wall
mounting
frame,
2-module
Covering frame for wall (surface) mounting.
9155061
2N
®Helios
IP Verso
Backplate,
1-module
A backplate for glass or uneven surface mounting. For 1
module.
9155062
2N
®Helios
IP Verso
Backplate,
2-module
A backplate for glass or uneven surface mounting. For 2
modules.
9155030
2N
® Helios
IP Verso–
Infopanel
The Infopanel module helps you add your company logo,
opening hours and similar information to the access unit.
The Infopanel has software-controlled backlight.
9155031
2N
®Helios
IP Verso-
Keypad
The numeric keypad module helps enter a numeric entrance
code. Use the keypad for departures or double entrance
.authentication. The keypad digits and symbols are backlit
9155032
2N
®Helios
IP Verso
125kHz RFID
card reader
The card reader module works with the as2N Access Unit
®
an OUT card reader. The module supports cards, key fobs
and/or other 125kHz standard carriers: orEM-41xx HID
.Proximity

132N TELEKOMUNIKACE a.s., www.2n.cz
®
9155033
2N ® Helios
IP Verso
13.56MHz
RFID card
reader
The card reader module works with the as2N Access Unit
®
an OUT card reader. The module supports cards, key fobs
and/or other 13.56MHz standard carriers.
ISO 14443AMifare Classic 1k & 4k, DESFire EV1, Mini, Plus
S&X, Ultralight, Ultralight C
ISO 14443BCEPAS, HID iCLASS
JIS X 6319Felica
9155034
2N
®Helios
IP Verso
I/O module
The logic input/output module helps you integrate various
sensors and control doors or other equipment. The module
is installed under another module, i.e. cannot be installed
directly into the (must be mounted2N Access Unit
®
outside).
9155037
2N® Helios
IP Verso-
Wiegand
module
The Wiegand module helps you interconnect your system
with other systems (access, security) via the Wiegand
interface. The module is installed under another module, i.e.
cannot be installed directly into the (must2N Access Unit
®
be mounted outside).
9155040
2N®Helios
IP Verso
RFID card
reader,
preparation
for NFC
The card reader module works with the as2N Access Unit
®
an OUT card reader. The module supports cards, key fobs
and/or other 13.56MHz standard carriers.
ISO 14443AMifare Classic 1k & 4k, DESFire EV1, Mini, Plus
S&X, Ultralight, Ultralight C
ISO 14443BCEPAS, HID iCLASS
JIS X 6319Felica
ISO 18092SmartPhone with NFC/HCE support, from
Android version 4.3
The 2N
®Access Unit is designed for outdoor applications and requires no additional
roof.
For choose the appropriate mounting frame andthe 2N
®Access Unit installation
box if necessary.

142N TELEKOMUNIKACE a.s., www.2n.cz
®
Electric Locks
932071EPart No.
BEFO 11211
12V/230mA DC
low consumption
932081EPart No.
BEFO 11221 with
momentary pin
12V/230mA DC
low consumption
A very short electric
pulse is enough to put
the lock into the OPEN
position and unlock
the door. After
passage, the lock gets
in the CLOSED (relax)
position again.
932091EPart No.
BEFO 11211MB with
mechanical blocking
12V/230mA DC
low consumption
You can set the lever
mechanically into the OPEN
or CLOSED position. When
OPEN, the lock is constantly
open, when CLOSED, it is a
standard lock.

152N TELEKOMUNIKACE a.s., www.2n.cz
®
Part No. 932061E
BEFO 11211MB with
momentary pin, mechanical
blocking
low consumption
12V/230mA DC
A regular lock with a built-in
contact to indicate whether
the door is open or closed.
Part No. 932072E
BEFO 31211
fail safe
12V/170mA DC
The fail safe lock is
closed when electricity
is switched on. When
electricity is
interrupted, the lock is
opened.
Part No. 932062E
BEFO 321211
fail safe plus door signalling
12V/170mA
The fail safe lock is closed
when electricity is switched
on. When electricity is
interrupted, the lock is
opened.
It contains a built-in contact
to indicate whether the door
is open or closed.
Power Supply
Part No. 91378100
PoE injector - without cable
Part No. 91378100E
PoE injector - with EU cable
Part No. 91378100US
PoE injector - with US cable
For intercom supply via Ethernet cable
where the PoE switch is absent.
91341481EPart No.
12V/2A adapter
A stabilised power
supply is required
where PoE is not used.
Part No.
932928
12V
transformer
for electric
lock
Tip
FAQ:Electric locks - Differences between locks for 2N Helios IP®

162N TELEKOMUNIKACE a.s., www.2n.cz
®
Additional Modules
9159010Part No.
Security relay
A simple, security
enhancing add-on.
Prevents lock
tampering. Installed
between the intercom,
from which it is also
supplied, and the lock
to be controlled.
Part No. 9159013
Departure button
Connects the logic
input for door
unlocking from inside
the building.
Part No. 9159012
Magnetic door contact
A door installation set for door
opening status identification. Used
for door protection, open door or
violent door opening detection.
9134173Part No.
13.56MHz Mifare RFID
card
Part No.9134174
13.56MHz Mifare RFID
key fob
9134165EPart No.
125kHz RFID card
of type EM4100

172N TELEKOMUNIKACE a.s., www.2n.cz
®
9134166EPart No.
125kH RFID key fob
9137420EPart No.
External RFID card
reader for connection
to PC using a USB
interface.
Suitable for system
administration and
adding of 125kHz
EM41xx cards using a
web interface or the
2N Access
®
Commander.
Part No. 9137421E
13.56MHz and 125kHz USB RFID
card reader
External RFID card reader for
connection to PC using a USB
interface. Suitable for system
administration and adding of
13.56MHz and 125kHz cards using a
web interface or the2N Access
®
.Commander
9137410EPart No.
External IP relay - 1
output
A stand-alone IP
device, which can be
controlled from an IP
intercom via HTTPcom
mands. Helps control
a device remotely.
9137411EPart No.
External IP relay - 4
outputs, PoE
A stand-alone IP
device, which can be
controlled from an IP
intercom via HTTP
commands. Helps
control a device
remotely.
Part No. 9159014EU/US/UK
2N 2Wire
®
(set of 2 adapters plus EU/US/UK
power supply)
Converter2N 2Wire
®helps you
connect any IP device to your
existing two-wire cabling from the
original door bell/phone without
reconfiguring. All you have to do is
have one 2N 2Wire
®unit at each end
of the cable and connect one of them
at least to the power supply. The2N®
2Wire unit
then providesPoEsupply
not only to the other converter, but
also to all the IP terminal equipment
connected.

182N TELEKOMUNIKACE a.s., www.2n.cz
®
Part No. 9159030
External 125kHz RFID
card reader
Secondary reader for
connection to an
internal reader. Allows
for control of card
entry from both sides
of the door. IP67
cover, also suitable
for exteriors. Reads
EM4100 and EM4102
cards.
Part No. 9159031
External 13.56MHz
Mifare RFID card
reader, Wiegand
Secondary reader for
connection to an
internal reader. Allows
for control of card
entry from both sides
of the door. IP68
cover, also suitable
for exteriors. Reads
Mifare cards.
Tip
Refer to the local 2N distributor for more accessories and
recommendations please.

192N TELEKOMUNIKACE a.s., www.2n.cz
®
1.2 Použité zkratky, termíny a piktogramy
The following symbols and pictograms are used in the manual:
Safety
by this information to prevent persons from injury.Always abide
Warning
by this information to prevent damage to the device.Always abide
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.

202N TELEKOMUNIKACE a.s., www.2n.cz
®
2. Popis a instalace
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection
2.5 Mounting Completion