3-form Privacy Screen 200.55 User manual

For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved.
200.55Privacy Screentm Installation Manual
Ready To Go

Contents Overview
(6)
Privacy Screen
End Post
--
(3)
Privacy Screen
U Channel, 47"
--
(6)
Privacy Screen Glazing
Channel, 21½"
--
Privacy Screen U
Channel Glazing
--
(3)
Required Tools
Drill Hammer Drill
(6)
Privacy Screen
Top Cap
--
(3)
¼" Varia Panel Privacy Screen
Installation
Template - Spacer
--
(1)
Hammer Drill Bit,
⅛" Concrete Bit
--
(1)
Allen Wrenches
(6) =
Privacy Screen
Baseplate KIT
---K
+
1/4  3" Hex Head
Wood Lag Screw
3152199
(12)
Privacy Screen
Base Plate
3152133
(6) +
Privacy Screen
8/32  1/2"
Countersunk Screw
3152143
(18) +
1/4  25/8"
Concrete Screw
3152144
(12)
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved. 2
200.55Privacy Screentm Installation Manual
Ready To Go

Overview
48" (1219.2mm)
18"
(457.2mm)
2"
(50.8mm)
Privacy Screen
Top Cap
3-15-2134
Privacy Screen
U Channel 47"
0-15-2156
Privacy Screen
U Channel Glazing
3-15-2194
+ + Wood Screws
3-15-2300
+
Privacy Screen
End Post
0-15-2135
Privacy Screen
Glazing Channel
0-15-2139
¼" Varia Panel
Privacy Screen
Base Plate KIT
3-15-2133-K
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved. 3
200.55Privacy Screentm Installation Manual
Ready To Go

Installation
Drill Pilot Holes
1
3-15-2133
3-15-2155
3Attach Bottom U Channel
aCut U Channel Glazing (3152194)
to length of U Channel.
bLineup U Channel Glazing over U Channel and drill ⁄" diameter
holes in the U Channel Glazing where the countersunk holes of the
U Channel are.
cU Channel Glazing Channel (3152194) for
lush mount U Channel will have
holes for countersunk
screw access.
3-15-2194 0-15-2156
Using the Privacy Screen Installation Template provided, layout
the intended coniguration of the privacy partition. Use the
base plates (3152133) with spacer piece (3152155) to lay out
the entire coniguration. Drill Pilot hole in the center of the slot
on the base plates (3152133).
*3form stocks the drill bits required for the pilot holes.
If you wish to purchase a drill bit, please contact your
3form sales representative.
2Install Baseplate
Before fastening ensure the side with
countersunk holes lines up with the slot of
the End Post.
Center
of Slot
(×2) 3-15-2199
or
3-15-2144
3-15-2133
3-15-2155
Wood ⁄" 3-15-2336 min ¼" --
Substrate Drill Bit * Depth Anchors Diameter
Concrete ¼" min " --
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved. 4
200.55Privacy Screentm Installation Manual
Ready To Go

dCenter U channel between Base Plates.
3Attach Bottom U Channel cont...
4Attach All Vertical Posts
5Cut Glazing Channels (if necessary)
Installation
Cut Glazing Channels (0152139) down
to the correct length. Correct Length
is determined by length of straight on
panel.
Glazing
Channel
Cut
Length
Varia Panel
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved. 5
200.55Privacy Screentm Installation Manual
Ready To Go

Installation
6Install Glazing Channels and Panels
7Install Top Caps
For more information, please visit 3-form.com or call 800.726.0126
DECEMBER 2019 | MANRTG20055 | REV 002 © 2019 3form, Inc. All rights reserved. 6
200.55Privacy Screentm Installation Manual
Ready To Go