3D R Video Transmitter Ki User manual
Video Transmitter Kit
USER GUIDE
Thank you for purchasing a 3DR Video Transmitter Kit!
This kit includes a lightweight video transmitter and receiver to
transmit onboard video during flight. This guide will show you
how to wire the transmitter and receiver.
SUGGESTIONS FOR VIDEO SYSTEM
Micro Compact
Super Vision
CCD Camera
APM
MinimOSD
Kit
Available at store.3DRobotics.com
11.1 v 900 mAh 25C
Battery with JST
connector
We recommend the following devices for displaying the video
transmitted by your 3DR Video Transmitter Kit.
»Goggles provide an immersive first-person experience;
fatshark.com offers several good models.
»FPV monitors are a great, portable solution for viewing your
video at the field. We like the 5” M500 monitor from
foxtechfpv.com.
»Turn your computer into a video capturing platform with this
AV-USB adapter: goo.gl/Xt13Z. (This solution requires an AV
female-to-male adapter.)
Video Transmitter Kit
USER GUIDE
Thank you for purchasing a 3DR Video Transmitter Kit!
This kit includes a lightweight video transmitter and receiver to
transmit onboard video during flight. This guide will show you
how to wire the transmitter and receiver.
SUGGESTIONS FOR VIDEO SYSTEM
Micro Compact
Super Vision
CCD Camera
APM
MinimOSD
Kit
Available at store.3DRobotics.com
11.1 v 900 mAh 25C
Battery with JST
connector
We recommend the following devices for displaying the video
transmitted by your 3DR Video Transmitter Kit.
»Goggles provide an immersive first-person experience;
fatshark.com offers several good models.
»FPV monitors are a great, portable solution for viewing your
video at the field. We like the 5” M500 monitor from
foxtechfpv.com.
»Turn your computer into a video capturing platform with this
AV-USB adapter: goo.gl/Xt13Z. (This solution requires an AV
female-to-male adapter.)
WIRING
1Wiring the transmitter
Transmitter wired to battery
and AV input cable
Connect battery here
Connect OSD module here
Attach an antenna to the transmitter. The red, black, and white
three-wire cable connects the transmitter to the GND, +12V, and
VOUT pins on your on-screen display (OSD) module. The red and
black two-wire cable connects the transmitter to a power source.
2Wiring the receiver
Attach an antenna to the receiver. Connect the AV output cable
to either receiver AV OUT port, and connect the DC power cable
from the DC power port to a power source (shown below with
battery connected).
CONTENTS Your 3DR Video Transmitter Kit includes:
Wireless AV transmitter
Wireless AV receiver
Antennas (2)
Transmitter cables:
Red and black two-wire cable
Red, black, and white three-wire cable
Receiver cables:
DC power cable
AV output cable
5.8GHz 200mW Wireless AV Transmitter Specifications:
• Frequency/channel: 5705-5945 MHz/8 CH
• Output power: 200 mW/33 dBm
• Frequency control: Built-in frequency & phase lock loop
• AV Input: Analog AV signal input
• ANT connector: RP-SMA
• Power supply: DC 7-12 volts
• Current supply: 850 mA
• Dimensions: 68 mm x 26 mm x 28 mm
• Weight: 60 g (incl. antenna)
• Gross weight: 85g
5.8GHz Wireless AV Receiver Specifications:
• Receiving frequency: 5705-5945 MHz/8 CH
• Receiving sensitivity: -90 dBm
• Antenna connector: RP-SMA
• Power supply voltage: DC 7-12 volts
• Supply current: 150 mA
• Dimensions: 61 mm x 52 mm x 13 mm
Transmitter wired to battery and AV output cable
WIRING
1Wiring the transmitter
Transmitter wired to battery
and AV input cable
Connect battery here
Connect OSD module here
Attach an antenna to the transmitter. The red, black, and white
three-wire cable connects the transmitter to the GND, +12V, and
VOUT pins on your on-screen display (OSD) module. The red and
black two-wire cable connects the transmitter to a power source.
2Wiring the receiver
Attach an antenna to the receiver. Connect the AV output cable
to either receiver AV OUT port, and connect the DC power cable
from the DC power port to a power source (shown below with
battery connected).
CONTENTS Your 3DR Video Transmitter Kit includes:
Wireless AV transmitter
Wireless AV receiver
Antennas (2)
Transmitter cables:
Red and black two-wire cable
Red, black, and white three-wire cable
Receiver cables:
DC power cable
AV output cable
5.8GHz 200mW Wireless AV Transmitter Specifications:
• Frequency/channel: 5705-5945 MHz/8 CH
• Output power: 200 mW/33 dBm
• Frequency control: Built-in frequency & phase lock loop
• AV Input: Analog AV signal input
• ANT connector: RP-SMA
• Power supply: DC 7-12 volts
• Current supply: 850 mA
• Dimensions: 68 mm x 26 mm x 28 mm
• Weight: 60 g (incl. antenna)
• Gross weight: 85g
5.8GHz Wireless AV Receiver Specifications:
• Receiving frequency: 5705-5945 MHz/8 CH
• Receiving sensitivity: -90 dBm
• Antenna connector: RP-SMA
• Power supply voltage: DC 7-12 volts
• Supply current: 150 mA
• Dimensions: 61 mm x 52 mm x 13 mm
Transmitter wired to battery and AV output cable
