3M MPRO110 - VGA LCOS Projector Manual

3M™Micro Professional Projector
MPro110
Operator’s Guide

3M™Micro Professional Projector MPro110
2© 2008 3M. All Rights Reserved.
Operator’s
Guide
Contents
Intended Use Statement ......................................................................................... 3
Trademarks and Copyrights .................................................................................... 3
Safety Information.................................................................................................. 3
Safety Labels......................................................................................................... 5
Package Contents.................................................................................................. 7
Parts ..................................................................................................................... 7
Getting Started ...................................................................................................... 8
Operating Instructions .......................................................................................... 10
Troubleshooting ................................................................................................... 13
Specifications ...................................................................................................... 14
Limited Warranty.................................................................................................. 16

3M™Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved. 3
Operator’s
Guide
Intended Use Statement
The 3M™Micro Professional Projector MPro110 is designed to operate with the 3M-specified
battery and 3M battery charger and in a normal office and home environment.
10˚–27˚C (50˚–80˚F)•
10–80% RH (without condensation)•
0–1,829 m (0–6000') above sea level•
The ambient operating environment should be free of airborne smoke, grease, oil and other
contaminants that can affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Trademarks and Copyrights
3M is a trademark of 3M Company.
VGA and XGA are trademarks of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standards Association.
No publication or commercial use may be made of this material without the express written
permission of 3M.
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior
to the use of this projector. Retain these instructions for future reference.
Explanation of Signal Word Consequences
m Warning: Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury and/or property damage.
m Caution: Indicates a potentially hazardous situation, which, if not avoided, may result in minor
or moderate injury and/or property damage.

3M™Micro Professional Projector MPro110
4© 2008 3M. All Rights Reserved.
Operator’s
Guide
m Warning
To reduce the risk associated with hazardous voltage:
Do not modify this product in any way. Use only 3M approved replacement•
components.
Do not attempt to service this projector other than battery replacement. There are•
no user serviceable parts other than the battery. Service to be performed only by a
3M-authorized service provider using 3M-approved system components.
Do not use the wall power supply in a wet environment.•
Do not use with a damaged wall power supply. Replace damaged part prior to use.•
To reduce the risk associated with fire and explosion:
Do not immerse the projector or battery in any liquid or allow either to get wet.•
Use only wall power supply and Li-Ion battery provided.•
Do not disassemble, short or expose the battery to high temperature.•
Do not overcharge or rapidly discharge the battery.•
Do not dispose of the battery by incineration or fire.•
Do not operate this projector in any environment above 100°F (38°C).•
Do not expose the projector or battery to direct sunlight in a closed space such as•
a vehicle.
To reduce the risks associated with driver distraction in a moving motor vehicle:
Do not use this projector in a moving motor vehicle.•
m Caution
To reduce the risk associated with environmental contamination:
Dispose of all system components in accordance with applicable government•
regulations.
To reduce the risks associated with LED visible bright light:
Do not stare directly into the LED light beam.•
To reduce the risks associated with tripping and falling:
Position the charging cord and data cables so that they can not be tripped over.•
SAVE THESE INSTRUCTIONS

3M™Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved. 5
Operator’s
Guide
Safety Labels
CLASS 1 LED PRODUCT
FCC STATEMENT - CLASS B
This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class “B”
computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a residential
installation. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
NOTICE: This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.

3M™Micro Professional Projector MPro110
6© 2008 3M. All Rights Reserved.
Operator’s
Guide
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC
equipment provided that the following conditions are met. The cables may have to be used
with the core set to the projector side. Use the cables which are included with the projector
or specified.
Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CE Statement
ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive
Low Voltage Directive: Meets 2006-95-EC Directive.
WEEE Statement
The following information is only for EU-members States:
The mark shown to the right is in compliance with Waste Electrical
and Electronic Equipment Directive 2002/96/EC (WEEE). The
mark indicates the requirement NOT to dispose the equipment as
unsorted municipal waste, but use the return and collection systems
according to local law.
RoHS Statement
3M Projection Systems can provide RoHS certification for products meeting the RoHS
directive.1
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,
1 RoHS compliant means that the product or part does not contain any of the substances in excess of the
following maximum concentration values in any homogeneous material, unless the substance is in an
application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for
cadmium. This information represents 3M’s knowledge and belief, which may be based on information
provided by third party suppliers to 3M.

3M™Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved. 7
Operator’s
Guide
Package Contents
Projector1
Battery Charger/AC Adapter2
Video Cable3
VGA Cable4
Battery5
RCA Adapter6
Note: In some regions, the
battery charger/AC adapter will
come with an outlet adapter.
1 2
3 4
5 6
Parts
Focus Wheel1
Lens2
Power On/Off3
Video IN4
VGA IN5
Power and Charge LEDs6
DC Power IN7
45
7
6
1
3
2

3M™Micro Professional Projector MPro110
8© 2008 3M. All Rights Reserved.
Operator’s
Guide
Getting Started
Install Battery
The 3M MPro110 comes with a rechargeable Lithium-Ion (Li-Ion) battery. The battery should
be charged before using the projector with the battery.
Important Note: Switch projector OFF and disconnect all cables before installing the
battery. Use only the 3M-specified battery: 78-6969-9974-3.
To install the battery: remove screw, slide the back cover off, insert the battery, and reinstall
the cover.
m Caution
To reduce the risk associated with explosion:
Only replace the battery with the 3M approved battery.•
To reduce the risk of environmental contamination:
Dispose of used battery according to applicable local, state, and federal regulations.•

3M™Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved. 9
Operator’s
Guide
Charge the Battery
The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC
adapter to power the projector when the battery is not charged or installed and to charge the
battery. When the battery needs charging, the image will turn black and the Power LED will
flash red.
To charge the battery: (1) Turn the power switch OFF. (2) Connect the battery charger/AC
adapter to the projector’s DC in. (3) Plug the battery charger/AC adapter into an electrical
outlet. (4) The charge LED lights orange while the battery is charging. The battery will be fully
charged in about 2 hours. (5) Once charging is complete, the charge LED will turn off.
Note: The battery will not charge when the power switch is in the ON position. Turn the
power switch OFF to charge battery.

3M™Micro Professional Projector MPro110
10 © 2008 3M. All Rights Reserved.
Operator’s
Guide
Operating Instructions
Connecting to a Video Source
There are many devices that output video signals: digital cameras, video phones, and portable
video players. The 3M MPro110 can project the video from these devices using its video port.
(1) Connect the included video cable to the projector (2) Connect the video cable to the video
source’s cable or the video output port.
NOTE: If the two cables have the same connector on the end, use the RCA adapter to
connect the two cables.