3S Vision N9012 Manual

12
3
4
5
6
1-1
4-1
RMIM-01G05044 Ver:01
Hardware InstallaƟon
Mini Dome Network Camera
Remove the CoverStart the Installation
Mounting the camera in accordance with
mounting position sheet attached.
Suggestion:
Hole size φ6mm, Depth 24mm
Mounting
Adjust the Lens FocusAngle
Panning coverageUse the screwdriver to loosen Tilting coverage
Insert the SD card
7
Lock the Screws
Holding the Cover
Focus Ring
Lens tool for adjusting focus.
Ceiling or Wall Mount Setting
Recommend
Tightening
Force 4kg
Indoor
Package Contents
RJ45 M12
+15。0。
90。
Lock
Recommend
Tightening
Force 4kg
Lock
Attention
Beware electric shock or
damages with wet hands

ConnecƟon Diagram
Mini Dome Network Camera
Connect the product to the switch hub and PC.
Network Camera
For more information, please refer to the attached CD.
RMIM-01G05044 Ver:01
Indoor
RJ45
M12
●MIC
●
Audio
●Power
●High dB alarm
● Alarm
●Switch
●POE Switch
Prepare the product, your PC and switch hub ready for connection.
Make sure that your PC has a LAN port available for connection to
the network cable of the product.
(as shown in the figure).
3
Connect to the switch hub (as shown in the figure).
2
Connect to the power source (as shown in the figure).
1
●Power
●HUB
●PC
●HUB
Please connect with your power adaptor directly.
Use a network cable and plug it in the LAN port of the product.
Plug the other end of the cable in the LAN port of the hub.
Prepare the product, your PC and switch hub ready for connection.
Make sure that your PC has a LAN port available for connection to
the network cable of the product.
Connect the microphone with 3.5mm phone jack into the "MIC IN".
Connect to microphone in.
4
●MIC
Turn on the power of the PC and hub.
7
Connect the speaker to the “LINE OUT” socket.
Connect to speaker
5
Connect to an extension I/O terminal block which is used to connect
external infrared detectors, beepers and smoke detectors.
Connect to Alarm/Reset
6
●High dB alarm
●Alarm
●Audio
GND
DI
GND
DO
TX+
1
2
3
4
5
6
7
8
TX -
RX+
DC+/DC-(Blue)
DC+/DC-(White/Blue)
DC-/DC+(White/Brown)
DC-/DC+(Brown)
RX-
DC+/DC-(White/Orange)
DC-/DC+(White/Green)
DC+/DC-(Orange) DC-/DC+(Green)